神府煤与稻杆共热溶研究

研究了神府煤与稻杆在1-甲基萘溶剂中不同温度下的共热溶行为。相对神府煤,稻杆单独热溶时具有更高的热溶率,表明其具有较好的热溶活性。但稻杆的热溶过程中产生大量的挥发性气体,导致其热溶率和热溶物产率之间的较大差异。神府煤单独热溶时,其热溶率与热溶物产率之间的差异相对较小。神府煤与稻杆的共热溶表明,两者之间存在协同效应,并且该协同效应受温度的影响显著。在热溶温度为320~340 ℃时,对热溶物产率而言具有正的协同效应,也即其热溶物产率的实验值大于通过神府煤与稻杆单独热溶时热溶物产率经质量加权平均计算得到的理论值。在研究的热溶温度范围内,共热溶的热溶率实验值均低于质量加权平均的理论计算值。相对于理论计算值,在320 ℃时热溶物产率的实验值增加达到最大,为7.9%。此外,通过对热溶物的性质表征,还进一步探讨了共热溶过程中的协同作用机理。     

煤热解过程中含氮产物的析出及金属离子的催化特性研究

选择3种典型煤种为研究对象,通过脱灰和添加含Fe、Ca、Na等金属盐,研究煤热解过程中金属离子对含氮气相产物析出特性的影响以及与煤种和温度的交互关联。结果表明,脱灰煤HCN和NH3的产率均比原煤样下降,而随温度的升高HCN的产率逐渐增大,NH3的产率则先增加后减小,在800℃有最大值。金属离子对不同变质程度煤的含氮气相产物析出的催化作用不同;Fe和Na抑制中等变质程度煤HCN的析出,而对低变质程度煤起促进作用,Ca则对HCN的析出均有一定的促进作用。而对于NH3的形成,3种离子均对中等变质程度煤有抑制作用,而对低变质程度的煤则有促进作用。不同金属离子对HCN和NH3析出的催化作用均有一定的范围。煤热解时含氮气相产物的析出是煤中固有多种金属离子共同作用的结果。     

Finite Element Based Micro-mechanical Modeling of Interphase in Filler Reinforced Elastomers

Characteristic properties of elastomers can be tailored by embedding them with filler particles. Along with enhancing the overall properties of the composite, filler particles also induce some inelastic effects. In this paper, a finite element computational model is used to study the effect of microstructure morphology in filled elastomers, on its macroscopic large deformation behavior. A multiphase material model that accounts for the hypothesis of shift in glass transition temperature in the vicinity of the filler particle is developed to simulate the interphase between the fillers and the matrix. It also accounts for the breakdown and re-aggregation of filler networks under cyclic loading. Examples at the microstructural level, demonstrating the dynamics of the interphase using the developed multiphase model have been successfully simulated. The obtained results are in good qualitative agreement with the Mullins effect. Therefore, computational experiments using this methodology enable the prediction of the experimentally observed softening behavior in filled elastomers based on its microstructure evolution.     

Synthesis and Characterization of Aminoporphyrin‐End‐Functionalized Poly(N‐isopropylacrylamide) with Photodynamic and Thermoresponsive Effects

The novel aminoporphyrin‐end‐functionalized poly(N‐isopropylacrylamide) (PNIPAM) polymer H₂N‐TPP‐PNIPAM (TPP=5,10,15,20‐tetraphenyl‐21H,23H‐porphyrin) behaves as a multifunctional platform that displays a photodynamic effect, thermosensitivity, and fluorescence properties. The polymer was designed by using an asymmetrical aminoporphyrin (i.e., H₂N‐TPP‐Cl) as the initiator for the atom‐transfer radical polymerization of N‐isopropylacrylamide (NIPAM). The polydispersity index (PDI) obtained by gel‐permeation chromatography indicated that the molecular‐weight distribution was narrow (1.09<PDI<1.27). The lower critical solution temperatures of H₂N‐TPP‐PNIPAM showed a decreasing trend as the molecular weight was increased as a result of the incorporation of the porphyrin group at the end of the chain. The fluorescence spectra revealed the luminescent properties of the materials. The results of confocal laser scanning microscopy showed that the polymer could enter the cytoplasm through endocytosis. In addition, the multifunctional platform exhibited low toxicity against normal cells (L929) and cancer cells (Hela) and enhanced photodynamic activity towards HeLa cells, without significant necrocytosis towards L929 cells; as a result this material may be useful in the future for practical photodynamic therapy.     

Linear {NiII–LnIII–NiII} Complexes Containing Twisted Planar Ni(μ‐phenolate)2Ln Fragments: Synthesis,Structure, and Magnetothermal Properties

Sequential reaction of a multisite LH₄ ligand {2‐[2‐hydroxy‐3‐(hydroxymethyl)‐5‐methylbenzylideneamino]‐2‐methylpropane‐1,3‐diol} with appropriate lanthanide salts followed by the addition of Ni(NO₃)₂ ? 6 H₂O in a 4:1:2 stoichiometric ratio in the presence of triethylamine afforded four heterobimetallic trinuclear complexes [Ni₂Gd(LH₃)₄] ? 3 NO₃ ? 3 MeOH ? H₂O ? CH₃CN ( 1 ), [Ni₂Tb(LH₃)₄] ? 3 NO₃ ? 3 MeOH ? CH₃CN ( 2 ), [Ni₂Dy(LH₃)₄] ? 3 NO₃ ? 3 MeOH ? H₂O ? CH₃CN ( 3 ), and [Ni₂Ho(LH₃)₄] ? 3 NO₃ ? 3 MeOH ? H₂O ? CH₃CN ( 4 ). Complexes 1 – 4 possess linear trimetallic cores with a central lanthanide ion. Magnetic studies revealed a predominant ferromagnetic interaction between the Ni and Ln centers. Alternating current susceptibility measurements of complex 3 showed a small frequency dependence of the out‐of‐phase signal, χ′′_M , under zero direct current field, but without achieving a net maximum above 2 K. Magnetic studies on 1 revealed that it has a significant magnetocaloric effect.     

Energetic Salts Based on an Oxygen‐Containing Cation: 2,4‐Diamino‐1,3,5‐triazine‐6‐one

A family of energetic salts with high thermal stability and low impact sensitivity based on an oxygen‐containing cation, 2,4‐diamino‐1,3,5‐triazine‐6‐one, were synthesized and fully characterized by IR and multinuclear (¹H, ¹³C) NMR spectroscopy, elemental analysis, and differential scanning calorimetry. Insights into their sensitivities towards impact, friction, and electrostatics were gained by submitting the materials to standard tests. The structures of 2,4‐diamino‐1,3,5‐triazine‐6‐one nitrate, 2,4‐diamino‐1,3,5‐triazine‐6‐one sulfate, 2,4‐diamino‐1,3,5‐triazine‐6‐one perchlorate, 2,4‐diamino‐1,3,5‐triazine‐6‐one 5‐nitrotetrazolate were determined by single‐crystal X‐ray diffraction; their densities are 1.691, 1.776, 1.854, and 1.636 g cm^?3, respectively. Most of the salts decompose at temperatures over 180 °C; in particular, the salts 2,4‐diamino‐1,3,5‐triazine‐6‐one nitrate and 2,4‐diamino‐1,3,5‐triazine‐6‐one perchlorate, which decompose at 303.3 and 336.4 °C, respectively, are fairly stable. Furthermore, most of the salts exhibit excellent impact sensitivities (>40 J), friction sensitivities (>360 N), and are insensitive to electrostatics. The measured densities of these energetic salts range from 1.64 to 2.01 g cm^?3. The detonation pressure values calculated for these salts range from 14.6 to 29.2 GPa, and the detonation velocities range from 6536 to 8275 m s^?1; these values make the salts potential candidates for thermally stable and insensitive energetic materials.     

Oxidation of aliphatic alcohols by triethylammonium chlorochromate in non-aqueous medium – A kinetic and mechanistic study

The oxidation of some aliphatic alcohols by triethylammonium chlorochromate (TriEACC) in dimethyl sulfoxide leads to the formation of the corresponding carbonyl compounds. The reaction is first order with respect to TriEACC. The reaction exhibited Michaelis–Menten type kinetics with respect to alcohol. The reaction is catalyzed by hydrogen ions. The hydrogen-ion dependence has the form: k_obs = a + b[H⁺]. The oxidation of [1,1-²H₂] ethanol (MeCD₂OH) exhibits a substantial primary kinetic isotope effect. Oxidation of aliphatic alcohol was studied in 19 different organic solvents. The solvent effect has been analysed using Kamlet’s and Swain’s multi-parametric equation. A suitable mechanism has been proposed.     

Development of Immunonutrient from Pumpkin (Cucurbita Moschata Duchense Ex. Lamk.) Seed

Pumpkin seeds has long been used as a source of nutrition. Based on its content, it is possible that part of this plant used as immunonutrient. The purpose of this research is to study the immunomodulatory activity of pumpkin seeds. It effects on the non-specific immune response was determined through carbon clearance test, organ indexes (liver, spleen and thymic gland) and mice peritoneal exudate activity (PEA). The effects on specific immune response were determined through total antibody titre, delayed type of hypersensitivity (DTH) reaction and number of lymphocytes. On non specific immune response test, pumpkin seed at a low dose (PLD-3.8 g/kg bw) and at a high dose (PHD-7.6 g/kg bw) showed immunostimulanting effect with phagocytic index of 1.219 and 1.347, respectively. PHD increased PEA activity (p<0.01) in lysing microbes. On specific immune response test, PLD and PHD showed immunostimulation effect indicated through 50% haemaglutination activity (HA titre) i.e., 1:512 and 1:2048, respectively compared to than that of control (1:256) for secondary antibody titre. Through cellular immunity test, 48 hours after challenged, PHD showed significant (p<0.05) increased in footpad thickness. After 7 days administration, both doses of pumpkin increased lymphocytes number significantly (p<0.05). Based on the data it can be concluded that, pumpkin seeds have immunomodulatory effects, and can therefore be used as immunonutrient     

Optofluidic droplet router

This contribution presents an optofluidic droplet router which is able to route and steer microdroplets using optically induced forces created solely by the bulk photovoltaic effect on a nonlinear substrate. The combination of microfluidic tools with the properties of a photorefractive crystal allows for the generation of dielectrophoretic forces that can be either repulsive, leading to virtual barriers, or attractive, creating virtual rails. The sign of these forces is solely determined by the electrical properties of the liquid medium under investigation. Moreover, the induced structures on the bottom of the microfluidic channel are optically reconfigurable, so that the same device can easily be adopted for different purposes. Appropriate droplet‐generating devices are fabricated by UV illumination of SU‐8 and polydimethylsiloxane replica molding of the master structures. The bottom of the channels is formed by an iron‐doped lithium niobate crystal, whose internal electric fields are induced by structured illumination patterns and exert dielectrophoretic forces on droplets in the microfluidic section.