Effect of pressure on the solubility of naphthalene in water at 25°C

Solubility of naphthalene in water was measured at 25°C and pressures up to 200 MPa. The solubility decreased with increasing pressure. From the pressure coefficient of the solubility, the volume change V accompanying the dissolution was estimated as 13.8±0.4 cm ³ -mol ^–1 . Further we estimated the volume change V _CH accompanying hydrophobic hydration as –0.1±0.6 cm ³ -mol ^–1 using the V value, the molar volume of crystalline naphthalene, and the partial molar volume of naphthalene in n-heptane. This V _CH is much larger (i.e., less negative) than that for hydrophobic hydration of alkyl-chain compounds and suggests that the hydration structure of naphthalene differs from that of alkyl-chain compounds.     

Traceability of (values carried by) reference materials

 Traceability is a property of the result of a measurement. Since values carried by (reference) materials must also have been obtained, of necessity, by measurement, the definition of traceability also applies to reference materials. It is extremely helpful to give the traceability (of the origin) of a reference material a separate name, i.e. 'trackability'. An analysis of the function of values carried by reference materials, shows that they can fulfill different functions, depending on the intended use. One of the functions located outside the traceability chain – and hence not very relevant for establishing traceability – is evaluating the approximate size of the uncertainty of the measurement of an unknown sample by performing a similar measurement on a reference material, used as a 'simulated sample'. Another function is located inside the traceability chain, where the reference material is used as an added 'internal standard'. Then, the value carried by the reference material is essential for establishing the traceability of the measured value of an unknown sample. In the latter application, the reference material acts as an 'amount standard' (the certified value for amount is used). Received: 11 November 1999 / Accepted: 24 February 2000     

高效液相色谱-电感耦合等离子体质谱法同时测定化妆品中5种含溴防腐剂

建立了同时测定化妆品中苯扎溴铵、2-溴-2-硝基-1,3-丙二醇、5-溴-5-硝基-1,3-二■烷、甲基二溴戊二腈、溴氯芬5种含溴防腐剂的高效液相色谱-电感耦合等离子体质谱法(HPLC-ICP-MS)。样品经含0.1%甲酸的甲醇溶液超声提取后,采用Agilent Eclipse-C_(18)(150 mm×4.6 mm,5μm)色谱柱分离,以0.1%甲酸-甲醇为流动相进行梯度洗脱,ICP-MS测定组分中的~(79)Br,以保留时间定性,外标法定量。5种含溴防腐剂均在0.5～100 mg/L范围内线性关系良好(r0.999),检出限为1.5～3.0μg/g,不同基质化妆品中的回收率为91.2%～108%,相对标准偏差(n=6)为1.3%～4.2%。该方法快速、准确、灵敏、专属性强,适用于化妆品中5种含溴防腐剂的定性定量分析。     

LC-ESI-MS Determination of Bilobalide and Ginkgolides in Canine Plasma

A sensitive and selective method using liquid chromatography with electrospray ionization mass spectrometric detection was developed for the quantification of bilobalide and ginkgolides in canine plasma. The analytes were extracted with diethyl ether-dichloromethane-isopropanol (6:3:1, v/v) after spiking the samples with daidzein (internal standard). The lower limit of quantification (LLOQ) of the method was 2.5 μg L⁻¹ for ginkgolide B and 10.0 μg L⁻¹ for bilabolide, ginkgolide A and ginkgolide C. The accuracy of the method was within 15% of the actual values over a wide range of plasma concentrations. The intra-day and inter-day precision was better than 15% (R.S.D.). Finally, the LC-ESI-MS method was successfully applied to study the pharmacokinetics of ginkgolides and bilabolide after administration of Ginkgo biloba extracts to dogs.     

生物检材中乌头类生物碱的检验

 用薄层 (TLC)、高效液相 光电二极管阵列检测器 (HPLC/DAD)、动物实验等方法对生物检材中乌头生物碱进行检验 ,并对这些方法进行比较。结果发现 ,TLC法为此类药物检验筛选的首选方法 ,最小检出量为 0 3μg。在进行HPLC检测时 ,以乌头生物碱的特征紫外吸收光谱和动物实验结果为重要的定性手段 ,其特征吸收波长为 (2 2 8± 2 )nm和 (2 75± 2 )nm。乌头生物碱在 2mg/L～ 5 0mg/L时其峰面积与质量浓度有很好的线性 ,相关系数为 0 9996。经实际案件证明 ,方法准确、灵敏 ,可用于生物检材中乌头类生物碱的检验。     

PET伸直链结晶体的研究进展

对聚对苯二甲酸乙二醇酯（PET）在特定的结晶条件下是否生成伸直链晶体进行了论证，系统总结了伸直链晶体形成的证据，并讨论了PET伸直链晶体形成的机理。     

Crystallite Nanosize Effect on the Structural Transitions of WO3 Studied by Raman Spectroscopy

Nanocrystallites of tungsten oxide samples of 2, 4, 16, 35 and 60 nm of diameter were prepared by cryosol and pyrosol techniques. The pressure- and temperature-induced phase transitions of these samples were monitored by Raman spectrometry from 0.1 MPa to 34 GPa and from 77 to 1200 K. The tetragonal (α)-orthorhombic (β)-monoclinic (γ) transitions in these nanometric samples are strongly downshifted in temperature by comparison with the bulk WO₃. For instance, the tetragonal phase which exists above 1171 K for the bulk tungsten oxide can be stabilized at 700 K for the 35 nm sample. In the same way, the monoclinic P2₁/n-monoclinic P2₁/c high-pressure-induced transition is slightly shifted from 0.1 GPa to a higher pressure (1.5 GPa). The discussion of these transition-line shifts is based on thermodynamic considerations in which the surface energy of crystallites plays an important role.     

茶叶中咖啡因的纸基质室温燐光法体内药代动力学研究

以快速定量滤纸为基质 ,用KI NaAc为重原子微扰剂建立了测定痕量咖啡因的滤纸基质室温光(PS RTP)分析法。并用于茶叶中咖啡因的测定及其在人体内的药代动力学研究。实验表明 :PS RTP法用于茶叶中咖啡因的测定准确、灵敏。受试者饮茶后 1～ 2h尿样中咖啡因排泄达高峰 ,2 4h后基本排泄完毕。咖啡因的尿排泄量占总摄取量的 64 .2 5 %。     

紫外吸收温差光谱法及其应用

用温差光谱法观察系列化合物的紫外吸收温差谱，发现温差谱具有很强的特征性，具有π键的富勒烯Ｃ６０的温差谱峰为负值，负峰的强度样品温差增大而负荷增大，负峰的峰位无明显移。     

Topologies of capillary condensation

Calculations are presented to illustrate the dependence of capillary adsorption upon the interactions present in model pores. The sequence of phase transitions at zero temperature is determined for a Lennard-Jones lattice gas in a pore consisting of 4 × 4 × sites. The dependence of the specific filling sequence upon the comparative strength of the gas-pore wall and the gas-gas interaction well-depths is determined. Grand canonical Monte Carlo simulations of sorption at finite temperature in the continuum version of the same model pore are also reported. Both the theory and the simulations were performed with variable gas-solid and gas-gas energy well-depths. At a temperature of 90 K, the gas-solid heterogeneity associated with atoms adsorbed in the corners, on the walls and in the interior pore volume gives rise to sequential adsorption similar to that observed in the lattice gas calculation at 0 K. A gradual approach to non-wetting behavior is observed as the gas-solid well-depth decreases. Values of the gas-solid well-depth needed to produce pore filling at saturation (i.e., pore-wetting) are discussed.