Developing a hybrid emulsion polymerization system to synthesize Fe3O4/polystyrene latexes with narrow size distribution and high magnetite content

A hybrid emulsion polymerization was formulated for synthesizing Fe₃O₄/polystyrene composite latex. This system, containing binary droplets that are magnetic (Mag)‐droplets with a diameter of 100–200 nm and styrene (St)‐droplets with a diameter of 3–4 μm, was obtained by mixing Mag‐miniemulsion and St‐macroemulsion. With extremely low surfactants concentration (?critical micelle concentration, CMC), the nucleated loci are selectively controlled in the Mag‐droplets, as the result of smaller droplet size and larger surface ratio. Both water‐soluble potassium persulfate (KPS) and oil‐soluble 2,2′‐azobis(2‐isobutyronitrile) was adopted to initiate the polymerization. In the presence of KPS, magnetic polystyrene latices with particles size of 60–200 nm, narrow size distribution, and high magnetite content (86 wt % measured by TGA) were attained successfully. The synthesized magnetic Fe₃O_4/polystyrene latices assembled into well‐ordered hexagonal structure in the surface of a carbon supported copper grid. The influence of various parameters on various aspects of the as‐synthesized Fe₃O₄/polystyrene was investigated in detail: type of initiator on composite morphology, feed ratio of Mag‐miniemulsion and St‐macroemulsion on magnetite content, and hydrophobic agent or amount of surfactant on size and size distribution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5285–5295, 2007     

空位在金刚石近(001)表面扩散的分子动力学模拟

用分子动力学方法模拟了空位在金刚石近(001)表面的扩散过程,研究了温度对空位扩散的影响.结果表明,当温度为1000K左右时,位于近表面第二层上的空位开始向表面运动;当温度在1400—2000K时,空位完全扩散到表面.这与实验结果和其他计算结果符合得很好.同时发现,温度为1400—1800K时,空位的扩散经历了两次迁移运动,其分别对应了均方位移图中的两个极大值.在不施加任何约束的条件下得到了空位的动态扩散路径,空位在金刚石近(001)表面的扩散势垒约为042eV.并探讨了一定温度下空位数目增多及其不同排列 关键词： 金刚石 空位 扩散 分子动力学     

两亲性嵌段聚合物的同步辐射小角x射线散射研究

应用同步辐射小角x射线散射(SAXS)方法研究了不同聚合条件下苯乙烯对乙烯基苯甲酸两亲性嵌段聚合物的聚集行为,结果发现该聚合物在选择性溶液中自组装形成胶束.胶束的形态和结构取决于嵌段聚合物的组成、浓度以及溶剂的性质等因素 关键词： 小角x射线散射 两亲性嵌段聚合物 分形维数 粒径     

Effect of end groups on complexation kinetics between cyclodextrins and guest polymers

α‐Cyclodextrin (α‐CD) has been complexed with various poly(ethylene glycol) (PEG) derivatives in aqueous solution. It has been found that the end groups of PEG derivatives affect the complexation kinetics greatly, but have only a little influence on the thermodynamic behavior. By increasing the hydrophobicity of end groups, the complexation speeds up rapidly. On the other hand, the bulky end groups slow down the threading of polymeric guests into the cavity of CD. By changing the hydrophobicity and the size of end groups, the complexation rate can be adjusted in the range of several orders of magnitudes, which should be quite useful in the design of new supramolecular systems. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2050–2057, 2006     

Effect of Notoginsenoside-Rg1 on the Expression of Several Proteins in the Striatum of Rat Models with Parkinson＇s Disease

After establishing hemi-Parkinsonian rat models, the relationships between neuron death and the expression of several proteins, such as c-Fos, GFAP, GDNF, NF-κB and some cytokines were determined. Therapeutics experiments with notoginsenoside-Rg1 were carried out. The research results show that the expressions of GFAP, NF-Kκ and c-Fos will obviously increase in the lesion side of the striatum and the expression of GDNF will decrease, which implies that the signal transduction pathway may participate in the apoptosis in neurons. The levels of some cytokines such as TNF-α, IL-1β in the striatum of PD rat models increased compared to those of normal rats. The results of the therapeutics experiments show that notoginsenoside-Rg1 may repress the immune inflammation response and regulate the immune function through the neuro-immune molecular network. Therefore, notoginsenoside-Rg1 can be used as an effective drug for anti-oxidation and anti-inflammation, and can be used in the therapy of Parkinson＇s disease（PD）.     

Molecular dynamics simulations on the structures and properties of ε-CL-20-based PBXs ——Primary theoretical studies on HEDM formulation design

Five polymer bonded explosives (PBXs) with the base explosive ε-CL-20 (hexanitrohexaazaisowurtzi- tane), the most important high energy density compound (HEDC), and five polymer binders (Estane 5703, GAP, HTPB, PEG, and F2314) were constructed. Molecular dynamics (MD) method was employed to investigate their binding energies (Ebind), compatibility, safety, mechanical properties, and energetic properties. The information and rules were reported for choosing better binders and guiding formula- tion design of high energy density material (HEDM). According to the calculated binding energies, the ordering of compatibility and stability of the five PBXs was predicted as ε-CL-20/PEG > ε-CL-20/ Estane5703 ≈ε-CL-20/GAP > ε-CL-20/HTPB > ε-CL-20/F2314. By pair correlation function g(r) analyses, hydrogen bonds and vdw are found to be the main interactions between the two components. The elasticity and isotropy of PBXs based ε-CL-20 can be obviously improved more than pure ε-CL-20 crystal. It is not by changing the molecular structures of ε-CL-20 for each binder to affect the sensitivity. The safety and energetic properties of these PBXs are mainly influenced by the thermal capability (C°p) and density (ρ) of binders, respectively.     

Theoretical and numerical analysis on multispectral bioluminescence tomography

Recently, molecular imaging has been rapidly developed to studyphysiological and pathological processes in vivo at the cellularand molecular levels. Among molecular imaging modalities, opticalimaging has attracted a major attention for its unique advantages.In this paper, we establish a mathematical framework for multispectralbioluminescence tomography (BLT) that allows simultaneous studiesof multiple optical reporters. We show solution existence, uniquenessand continuous dependence on data as well as the limiting behaviourswhen the regularization parameter approaches zero or when thepenalty parameter approaches infinity. Then, we propose twonumerical schemes for multispectral BLT and derive error estimatesfor the corresponding solutions.     

高固体分羟基丙烯酸树脂的合成

以过氧化二苯甲酰（BPO）／过氧化二异丙苯（DCP）（质量比为2：3）为复合引发剂，二甲苯为溶剂，选用适量含羟基单体和分子量调节剂，以减缓树脂合成聚合反应中的自动加速现象，合成了分子量为3000-4000，多分散性指数d〈2的高固体分羟基丙烯酸树脂．该树脂与缩二脲多异氰酸酯（HDI）的配漆实验证明，所得漆膜鲜映性好、丰满度高、色泽好、雾影值低、综合性能较好．     

Fermi, Majorana and the Statistical Model of Atoms

We give an account of the appearance and first developments of the statistical model of atoms proposed by Thomas and Fermi, focusing on the main results achieved by Fermi and his group in Rome. Particular attention is addressed to the unknown contribution to this subject by Majorana, anticipating some important results reached later by leading physicists.