从服务营销视角谈图书馆员工管理

阐述了服务营销与图书馆员工的分类，分析了各类员工的工作特征和压力来源，并提出了对应的管理策略。     

Determination of As, Cd, Pb and Tl in coal by electrothermal vaporization inductively coupled plasma mass spectrometry using slurry sampling and external calibration against aqueous standards

A method was developed for the determination of As, Cd, Pb and Tl by electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS) with slurry sample introduction using certified reference coal samples. The ⁷⁵As, ¹¹¹Cd, ²⁰⁸Pb and ²⁰⁵Tl isotopes were monitored, considering the lower probabilities of these isotopes in suffering interferences. The carrier and modifier effect of Ru added in solution was evaluated, demonstrating that sensitivity for all elements is considerably improved by the addition of 15 μg of Ru to each individual measurement. This confirms its ability to act as a physical carrier particularly for the analytes in aqueous solution. Pyrolysis and vaporization temperatures of 500 and 2500 °C, respectively, were selected after optimization for aqueous solutions and for coal slurries. Similarly, the carrier gas flow rate was optimized as 1.1 L min⁻¹. After optimization of the operational parameters, the determination of the four elements in six certified reference coal samples was carried out by external calibration against aqueous standards in 5% v/v HNO₃, resulting in good agreement between the certified or given values and the determined ones. For Tl, due to the absence of certified values, a comparison was established considering previously published data using solid sampling high-resolution continuum source graphite furnace atomic absorption spectrometry. Detection limits (μg g⁻¹) of 0.1, 0.004, 0.045 and 0.001 were achieved for As, Cd, Pb and Tl, respectively, and the precision was typically better than 10%.     

A Gas Chromatographic Analysis of Light Hydrocarbons on a Column Packed with Modified Silica Gel

IntroductionAnalysis of light hydrocarbons achieved by gas-solid chromatography is important in petrochemical industry, environmental protection and some other areas. A variety of columns have been used, including conventional packed column1, Al2O3 and graphitized carbon black PLOT column2, 3 and silica gel SCOT column4. Al2O3 PLOT column is excellent for the analysis of light hydrocarbons. Conventional packed column also has its own advantages, such as easy column preparation, resistanc…     

Effect of an Ultrahigh Rubber ABS Impact Modifier Resin on Mechanical Properties of Intumescent Flame-Retardant ABS Composites

The effect of an ultrahigh rubber acrylonitrile-butadiene-styrene (ABS) impact modifier resin (UHR-ABS) on the mechanical properties of an intumescent flame-retardant ABS composite was characterized. Samples were obtained by compounding ABS and an intumescent flame-retardant master batch that was prepared using an intumescent flame-retardant composite (IFRC) with ABS and/or UHR-ABS as well as by direct compounding IFRC, UHR-ABS, and ABS. The incorporation of UHR-ABS resulted in reduction in the storage modulus, damping behavior and glass transition temperature, as evidenced by dynamic mechanical analysis. With increasing mass fraction of the UHR-ABS, the tensile strength and the flexural strength decreased gradually, and the notched impact strength increased, but the increase was more significant for compounding IFRC, UHR-ABS, and ABS than for compounding ABS and IFRC master batches. SEM micrographs of the fresh fracture surface of the composites were used to estimate the mechanism of the increased notched impact strength owing to the incorporation of UHR-ABS.     

采用钯基体改进剂石墨炉原子吸收法测定纺织品中的可萃取铅

纺织品标准中对铅的限量极为严格,但萃取汗液基体成分复杂,背景吸收干扰强烈,为解决纺织品中的可萃取铅检测的困难,建立了一种采用基体改进剂的石墨炉原子吸收光谱法,测定纺织品中的可萃取铅。通过比较两种基体改进剂,优化实验条件,确定了以钯-硝酸镁为基体改进剂、灰化温度1 200℃、原子化温度2 300℃的实验条件。结果表明,以钯-硝酸镁为基体改进剂更能有效降低纺织品可萃取铅的基体干扰,并且具有良好的精密度(2.6%~3.3%)和准确度(加标回收率94.3%~105.6%)。     

Preparation and properties of organo‐modifier free PET/MMT nanocomposites via monomer intercalation and in situ polymerization

In order to prevent the properties, especially transparency, color and health security, of PET/clay nanocomposites from being deteriorated due to the thermal degradation of clay organo‐modifer, we had directly modified sodium montmorillonite (Na⁺‐MMT) with PET's monomer, bis (hydroxyethyl) terephthalate (BHET) which had a degradation temperature higher than 400°C, and successfully prepared the hybrids via in situ polymerization. Nanodispersion of clay and the intercalated morphology were determined, and compared with PET/Na⁺‐MMT hybirds in which Na⁺‐MMT was directly added without any treatment. Improved mechanical properties and T_g were observed for the prepared PET/ BHET‐modified clay composites. More importantly, the film produced from the composites had the same transparency as that of pure PET even when 2 wt% of clay was added. Non‐isothermal and isothermal crystallization experiments showed a very good neculation capability of the nano‐dispersed clay, particularly at higher crystallization temperatures. Copyright © 2009 John Wiley & Sons, Ltd.     

Volatilization of Cr, Co, Mn and Ni as their pyrrolidinecarbodithioate chelates from electrothermal vaporizer for sample introduction in inductively coupled plasma optical emission spectrometry

Based on gaseous compound introduction as pyrrolidinecarbodithioate chelates of Cr, Co, Mn and Ni by electrothermal vaporization (ETV) in inductively coupled plasma optical emission spectrometry (ICP-OES), a novel method for the determination of trace Cr, Co, Mn and Ni was developed. It was found that in the presence of ammonium pyrrolidinecarbodithioate (APDC) the trace amounts of analytes were vaporized at a low temperature of 1500 °C. The main factors affecting the formation and vaporization of analytes chelates were investigated in detail. Thermal gravimetric analysis of Cr-APDC, Co-APDC, Mn-APDC and Ni-APDC chelates and UV-vis analysis of the sample vapor collected in CHCl₃ after vaporization of their chelates indicated that the analytes were vaporized and transported into ICP as their chelates. Under the optimized conditions, the limits of detection (LOD) (3σ) and the relative standard deviations (R.S.D.) of Cr, Co, Mn and Ni were 0.36, 0.19, 0.073 and 0.32 ng, and 3.9, 4.9, 3.8 and 3.3% (c = 0.5 μg ml⁻¹, n = 7), respectively. By combination with a solvent extraction step, the proposed method had been successfully applied to analysis of Cr, Co, Mn and Ni in the artificial seawater. To evaluate the accuracy of the developed method, two certified reference materials (human hair GBW 09101 and poplar leaves GBW 07604) were also analyzed, and the determined values obtained were in good agreement with the certified values.     

Aliphatic carboxylic acids and alcohols as efficiency and elution strength enhancers in micellar liquid chromatography

Micellar liquid chromatography (MLC) uses surfactant solutions as mobile phases with added organic additives to enhance both the elution strength and the chromatographic efficiency. Two aliphatic carboxylic acids (1-butanoic and 1-pentanoic) were used as MLC additives and compared with the two corresponding alcohols (1-butanol, 1-pentanol) in terms of elution strength, efficiency and selectivity. A set of 11 phenol derivatives was used as probe compounds. All micellar mobile phases were prepared with sodium dodecylsulfate (SDS) with concentration ranging from 0.05 to 0.15 M and the modifier content within 1.0 and 5.0% (v/v). The elution strength of different mobile phases containing a constant amount of SDS and different amounts of modifiers; and mobile phases containing a constant amount of modifier and different SDS concentration were determined and discussed. The effect of the acid modifiers on efficiency was studied constructing van Deemter plots that showed no minimum within the 0.01–0.7 mL/min flow rate range studied. Temperature effects were also studied constructing the classical van’t Hoff plots. The slight curvature of the plots in the 25–70 °C range may indicate some modification of the surfactant-bonded moiety layer on the stationary phase surface. Since no definitive advantage of the use of aliphatic acids were established compared to their alcohol counterpart, their terrible smell will probably preclude their use as MLC organic modifiers.     

纺织用聚氨酯牵伸辊的研究

采用自制扩链剂与改性剂，通过对聚合多元醇的品种与分子量的选择，研制了适合纺织牵伸辊用的聚氨酯胶料。     

改性Pd/C催化氢化蒎烯的研究

报道了Pd/C催化剂用于蒎烯氢化制蒎烷的研究结果 ,得到了氢化反应的适宜条件。重点考察了修饰剂对催化剂活性和选择性的影响。