Electrode Modified with Langmuir–Blodgett (LB) Film of Calixarenes for Preconcentration and Stripping Analysis of Hg(II)

A new type of current sensor, Langmuir–Blodgett (LB) film of calixarene on the surface of glassy carbon electrode (GCE) was prepared for determination of mercury by anodic stripping voltammetry (ASV). An anodic stripping peak was obtained at 0.15 V (vs. SCE) by scanning the potential from ?0.6 to +0.6 V. Compared with a bare GCE, the LB film coated electrode greatly improves the sensitivity of measuring mercury ion. The fabricated electrode in a 0.1 M H₂SO₄+0.01 M HCl solution shows a linear voltammetric response in the range of 0.07–40 μg L^?1 and detection limit of 0.04 μg L^?1 (ca. 2×10^?10 M). The high sensitivity, selectivity, and stability of this LB film modified electrode demonstrates its practical application for a simple, rapid and economical determination of Hg²⁺ in a water sample.     

4-Amino-1-oxyl-2,2,6,6-tetramethylpiperidine-3-carboxylic acid (β-TOAC), the first spin-labelled, cyclic, chiral β-amino acid resolved in an enantiomerically pure state

Amination of 3-carboxymethyl-1-oxyl-2,2,6,6-tetramethyl-4-piperidone with (R)-α-methylbenzylamine, NaBH₃CN reduction of the resulting enamine and removal of the chiral auxiliary from the separated diastereoisomers, led to enantiomerically pure (3S,4S) and (3R,4R) methyl 4-amino-1-oxyl-2,2,6,6-tetramethylpiperidine-3-carboxylates.     

Effect of hydrocolloids on starch thermal transitions,as measured by DSC

Differential scanning calorimetry (DSC) was used to analyze the influence of different hydrocolloids (xanthan, guar, and locust bean gums, carboxymethylcellulose and sodium alginate) on the gelatinization of corn starch in systems with starch concentration ranging between 0.1 and 0.7 g starch/g mixture. The reduction of available water produced a shift in gelatinization temperature, especially of the conclusion temperature. The effect was more marked for ionic hydrocolloids. The influence of hydrocolloids on glass transition temperature (T _g) of gelatinized starch suspensions and on the glass transition temperature of the maximally freeze-concentrated solute/unfrozen water matrix (T _g) was also studied.T _g onset values ranged between –4.5 and –5.5C for corn starch pastes with and without hydrocolloids. Those hydrocolloids that increased the viscosity of the unfrozen matrix inhibited additional ice formation during thawing (devitrification).Starch concentration and final heating temperature were found to be relevant factors affecting the kinetics of amylopectin retrogradation during frozen storage at –4C. Xanthan gum failed to prevent amylopectin retrogradation; this observation could be attributed to the fact that gums act outside the starch granule, while amylopectin retrogradation takes place within the granule.     

Self‐Assembly Film of Zeolite Y Nanocrystals Loading Palladium on an Au Electrode for Electrochemical Applications

Nano‐scale zeolite Y crystals were synthesized, and palladium nanoparticles were prepared in the supercage of the zeolite by “ship‐in‐a‐bottle” approach. A novel method to fabricate zeolite‐modified electrode (ZME) loading Pd nanoparticles was developed, in which the zeolite Y loading Pd²⁺ ions was self‐assembled on (3‐mercaptopropyl) trimethoxysilane‐attached Au surface to form the stable and density packed multilayers (SAM‐ZME). The structures of zeolite Y and the SAM‐ZME were investigated by using TEM, XRD and SEM techniques. Pd²⁺ ions in the SAM‐ZME were converted into Pd nanoparticles (Pd_n⁰) by two steps consisting of the electrochemical reduction as well as the succeeding admission and release of CO. The redox couple [Fe(CN)₆]^3?/4? was used to probe the electron‐transfer barrier properties during self‐assembling process. Moreover, the special properties of the SAM‐ZME loading Pd_n⁰ were studied by using cyclic voltammetry and CO‐probe in situ FTIR spectroscopy. The results illustrated that Pd_n⁰ in the SAM‐ZME exhibits higher electrocatalytic activity for oxidation of adsorbed CO than that of ZME prepared in our previous study by zeolite coating method. The present study is of importance in design and preparation of SAM‐ZME, which poccesseses excellent properties for the immobilization of electrocatalysts or biomolecules.     

基于SnO2为修饰层的Au-Pt / SnO2 / Au复合电极研究

用真空镀膜法在Au电极上沉积SnO₂薄膜，在HAuCl₄和H₂PtCl₄的混合溶液中利用直接还原法，将Au-Pt双金属纳米颗粒组装在SnO₂ / Au电极上，得到Au-Pt / SnO₂ / Au复合电极。采用SEM、TEM、XPS及CV曲线测定对Au-Pt / SnO₂ / Au复合电极进行了表征。结果表明:复合电极上双金属纳米颗粒分布均匀，粒子粒径约为25 nm左右。SnO₂作为修饰层以配位键与双金属纳米粒子结合。Au-Pt / SnO₂ / Au复合电极具有良好对甲醇氧化的电化学性能。     

Determination of Dopamine in the Presence of Ascorbic Acid Using a Poly(Amidosulfonic Acid) Modified Glassy Carbon Electrode

A glassy carbon electrode (GCE) was modified with electropolymerized films of amidosulfonic acid in pH 7.0 phosphate buffer solution (PBS) by cyclic voltammetry (CV). The modified electrode showed an excellent electrocatalytical effect on the oxidation of dopamine (DA). In pH 7.0 PBS, the anodic peak current increased linearly with the concentration of DA in the range of 5.0×10^–7 1.0×10^–4moldm^–3, with a correlation coefficient of 0.9932, and a detection limit (S/N=3) of 1.0× 10^–7moldm^–3. The relative standard deviation of 10 successive scans was 2.5% for 1.0×10^–6moldm^–3 DA. The interference of ascorbic acid (AA) with the determination of DA could be eliminated because of the very distinct attracting interaction between DA cations and the negatively poly(amidosulfonic acid) film in pH 7.0 PBS. The proposed method exhibited good recovery and reproducibility.     

Fluorescent Molecular Recognition and Sensing System of Bis-Dansyl Modified γ-Cyclodextrins

Flexible hosts, 6A,6B-; 6A,6C-; 6A,6D-; and 6A,6E-bis dansylglycine-modified -cyclodextrins (-1, -2, -3, and -4, respectively) have been synthesized as a sensing molecule for organic guests including terpenoids and bile acids. These host compounds show a pure monomer fluorescence whose intensity is decreased or enhanced upon addition of guest species. The value I/I₀, where I and I₀ are fluorescence intensities in the presence and absence of a guest and I is I₀- I, was used as a parameter of sensitivity. These hosts exhibit highly sensitive and selective molecular recognition ability, particularly, for lithochoic acid, chenodeoxycholic acid, and ursodeoxycholic acid. The behaviors of the appended moieties of these hosts when host–guest complexation occurs are studied by induced circular dichroism (ICD) spectra and fluorescence spectral change on accommodation of a guest. The ICD pattern of these hosts alone or on accommodation of a guest is very similar, indicating that the behavior of the appended moieties are very similar. The guest-induced variations in the fluorescence or ICD intensity suggest that the appended moieties act as a hydrophobic cap that enables the cyclodextrin to form 1 : 1 host–guest complexes.     

A new polyphenol modified electrode containing an anchored ruthenium complex and its use in electrocatalytic oxidation of organic substrates

This work describes the preparation of a new modified electrode containing a ruthenium complex (cis-aquadimethylbipyridyltriphenylphosphineruthenium II), bonded to a stable polyphenol film. This modified electrode promotes the fast electrocatalytic oxidation of safrol (5-allyl-benzo[1,3]dioxole) and isosafrol (5-propenyl-benzo[1,3]dioxole), giving two interesting products benzo[1,3]dioxole-5-carbaldehyde (piperonal) and 3-benzo[1,3]dioxol-5-yl-propenal respectively, with good yields. The electrode preparation can be carried out at a potential range which does not interfere on the anchored electroactive ruthenium complex, but it allows for the phenol oxidation to occur and therefore polymerize forming the polyphenol film. The catalytic character of this modified electrode is showed by its high turnover numbers. The procedure to isolate the products is very simple.     

Sensitive Adsorption Stripping Voltammetric Determination of Reserpine by a Glassy Carbon Electrode Modified with Multi-Wall Carbon Nanotubes

Adsorption stripping voltammetry, a very sensitive electroanalytical method, was employed to determine reserpine, a kind of anti-hypertensive drug. In 0.1M phosphate buffer with a pH of 6.0, reserpine was accumulated at a multi-wall carbon nanotubes (MWNT)-modified glassy carbon electrode (GCE) surface under the condition of open-circuit. In the following anodic sweep from 0.20 to 1.00V, reserpine, adsorbed at the MWNT-modified GCE surface, was oxidized and yielded a sensitive oxidation peak at 0.64V. Due to its unique structure and extraordinary properties, MWNT shows a ten times higher accumulation efficiency toward reserpine, compared with a bare GCE. Hence, the amount of reserpine at the MWNT-modified GCE surface increases significantly, and finally the oxidation peak current improves greatly. The experimental conditions, such as supporting electrolyte, pH value, the amount of MWNT-DHP suspension, accumulation time and scan rate, were optimized for the measurement of reserpine, and a sensitive electroanalytical method was proposed for reserpine determination. The oxidation peak current varies linearly with the concentration of reserpine over the range of 2×10^–8 to 1×10^–5M, and the detection limit is 7.5×10^–9M after 4min open-circuit accumulation. The relative standard deviation at 1×10^–6M reserpine was about 4.7% (n=7), indicating excellent reproducibility. This new method was successfully demonstrated with reserpine injections and tablets.     

Permselective and Preconcentration Properties of a Surfactant‐Intercalated Clay Modified Electrode

This work is focused on the voltammetric examination of the ion exchange properties of a smectite type clay, before and after its modification by the replacement of its native interlamellar cations (Na⁺, K⁺, Ca²⁺) by hexadecyltrimethylammonium cations (HDTMA⁺). The raw clay and its organically modified form were first characterized by X‐ray diffraction (XRD) and N₂ adsorption–desorption isotherms (BET method) that confirmed the modification via an intercalation process. These materials were subsequently coated onto glassy carbon surfaces, and the resulting modified electrodes were evaluated for the uptake of [Ru(NH₃)₆]³⁺ and [Fe(CN)₆]^3? ions used as redox probes. Some experimental parameters affecting the incorporation of the probes within the film, including the ionic strength, the surfactant loading and the solution pH are thoroughly examined, in order to highlight the mechanism of the process. The possibility of using the surfactant‐intercalated clay modified electrode as an electrochemical sensor for [Fe(CN)₆]^3? is also evaluated.