Generating well-behaved utility functions for compromise programming

The purpose of this paper is to seek utility functions satisfying a weak condition which guarantees that the utility optimum always belongs to the compromise set. This set is a special subset of the attainable or feasible set, which is generated through the application of the well-known operational research approach called compromise programming. It is shown that there are large families of utility functions satisfying this condition, thus reinforcing the value of compromise programming as a good surrogate of the traditional utility optimum.Thanks are due to the reviewers for their helpful suggestions. The English editing by Ms. Christine Méndez is appreciated. The authors have been supported by the Comisión Interministerial de Ciencia y Tecnología (CICYT), Madrid, Spain.     

Identifying potential binding modes and explaining partitioning behavior using flexible alignments and multidimensional scaling

A method is described for the rapid and automatic analysis of flexible molecular alignments using multidimensional scaling and a normalized scoring scheme. A projection scheme was devised to separate orientational and conformational effects. It is shown that the approach can be utilized for the identification of common binding orientations or to the study of differences in partioning behavior. It is suggested that the method can be employed as a novel approach exploring molecular similarity as a dynamic property, so that it includes aspects of motion (by way of mutual orientations), conformations and molecular properties.     

Effects of delayed linear electrical perturbation of the Belousov-Zhabotinsky reaction: a case of complex mixed mode oscillations in a batch reactor

Delayed feedbacks are quite common in many physical and biological systems and in particular many physiological systems. Delay can cause a stable system to become unstable and vice versa. One of the well-studied non-biological chemical oscillators is the Belousov-Zhabotinskii (BZ) reaction. This gives relaxation oscillations for a considerable period of time under batch conditions. This paper deals with the effect of perturbing the limit cycle oscillation of BZ reaction by employing a delayed electrical feedback to the system under batch conditions. The parameters chosen to study are external resistance and delay. For various resistances and delays the system was electrically perturbed and found to exhibit various complex mixed mode oscillations. The dynamic features are accounted for by the Oregonator model, with time delay incorporated in one of the variables. This revised version was published online in June 2006 with corrections to the Cover Date.     

Sol-gel polyimide-silica composite membrane: gas transport properties

The effect of introduction of silica particles prepared by the sol-gel technique on the gas transport properties of a polyimide film was studied. The sorption and permeation of N₂, O₂, CO₂, H₂ and CH₄ were studied and correlated with morphological changes in the polymer structure. From sorption isotherms, we observed that the composite membrane presents higher solubility coefficients than the polyimide one. The solubility coefficient ratio between the composite and the polyimide is about 1.5–2.0. The isotherms were analyzed in terms of the dual mode sorption. The Henry's coefficient and the Langmuir's affinity and saturation constants were obtained allowing to calculate the Langmuir to Henry concentration ratios as function of the gas pressure. These ratios decrease until zero within a certain pressure range as long as the Langmuir's mode is acting and they are higher for the polyimide membrane when compared with the composite one. This study was completed with calorimetric measurements during the sorption. The gas interaction energy in kJ/mol decreases within the same pressure range as previously described. The measured energies are higher for the polyimide film when compared with the composite one because the polyimide membrane presents a stronger energetic effect caused by a higher Langmuir's contribution. From permeation studies at 3.15⁵ Pa, the composite membrane showed higher permeability coefficients and permselectivities than the polyimide one. All these results were explained, taking into account the difference on the imidization degree of both membranes and the morphological changes which may be induced by the silica nodules in the organic/inorganic interphases.     

激光拉曼光谱在高分子中的应用

论述了激光拉曼光谱对高分子结构、结晶形态和表征,反应动力学过程和取向的研究,还介绍了纵向声学模、共振、高温高压、光波导和付里叶拉曼光谱在高分子研究中的最新进展。     

高分子量的枝状聚硅烷的合成与表征

根据硅氢加成反应机理设计了“顺点滴式”工艺 ,高效、低耗地合成了甲基苯乙基二氯硅烷和甲基正己基二氯硅烷 .根据Wurtz还原偶联反应原理 ,采用“预聚”和“混聚”两种工艺分别合成枝状共聚硅烷 ,发现运用“预聚”工艺可以合成分子量很高的枝状聚硅烷 .     

Fast spatially localised electrooptical mode in vertically aligned nematic LCs with negative dielectric anisotropy

ABSTRACT

Electro-optical switching and the liquid crystal (LC) director distribution are studied in spatially periodic electric field for vertically aligned LC with negative dielectric anisotropy. Two electro-optical switching modes characterised by different switching times are observed. These modes are well distinguished optically by choosing proper geometry for the polarisers axes orientation. One of these modes is significantly faster as compared to the other. The fast switching is explained in terms of localised near-to-surface director reorientation. The 3D-numerical simulation shows very good agreement with the experiment: it points out the existence of the disclination lines and field-stabilised walls responsible for the localised director field switching and its relaxation. Possibilities of enhancing the fast mode for high-speed light modulators are discussed.     

PBL教学模式在动物育种学课程教学中的应用——以甘肃农业大学为例

动物育种学课程是动物科学专业的专业基础课,具有知识结构复杂和实践性较强的特点,“以教师讲授为主”的传统授课模式不能满足畜牧业发展对高素质技能型人才的要求,亟需进行教学模式的改革提高该课程的教学质量和学生培养质量。采用PBL（Problem-based learning）教学模式对甘肃农业大学《动物育种学》课程进行了教学尝试,统计分析学生的实验成绩、平时成绩、期末成绩及综合成绩,问卷调查学生对PBL教学模式的满意度,评价PBL教学模式在动物育种学课程教学改革中的应用效果。采用PBL教学模式学生的实验成绩、平时成绩、期末成绩与综合成绩均显著高于传统教学模式,PBL教学模式80分以上学生居多,96.67%的学生对PBL教学模式持赞同态度。PBL教学模式效果优于传统教学模式,有助于激发学生的学习兴趣,提高学生对动物育种学课程知识的掌握程度及综合应用水平。     

旋转输液管动力稳定性理论分析北大核心CSCD

基于Lagrange原理和假设模态法建立了旋转输液管的动力学模型.通过降阶升维的方法求解系统的特征值问题,并分析了旋转输液管自由振动特性.得到了不同端部集中质量和转速下,系统特征值随流速升高的演变轨迹.揭示了临界流速随系统参数的变化规律.研究发现,内部流体的流动对旋转输液管动力学特性存在显著影响.在某些参数组合下,系统低阶模态能够形成不同形式的内共振关系.预示了旋转输液管模型蕴含丰富的动力学现象.     

我国区域绿色技术创新效率的分类测度和提升模式研究——基于非期望产出的SBM-SupSBM模型

本文首先运用考虑非期望产出的SBM-SupSBM模型估计我国各省市绿色技术创新效率并进行分类:稳定上升类、平稳类、大幅度波动类以及下降类。之后从企业内部和外部两方面对绿色技术创新效率提升的影响因素提出假设,着重考虑大幅度波动类别省份的效率提升。运用面板数据模型各影响因素进行验证,结论显示:企业规模对绿色技术创新效率波动较大的省份起到显著的抑制作用,环境规制和技术进步对绿色技术创新效率波动较大的省份作用不明显。针对分析结果,提出结论:在提升绿色技术创新效率的过程中,应注重企业规模和技术进步的协同作用,以及技术的开放程度。