K-Mo基催化剂的表面酸性与其合成醇选择性

对500℃和800℃焙烧制得的氧化态K－MoO3／γ－AlO3，K－MoO3／SiO2及非负载K－Mo催化剂进行硫化后，测试其合成醇活性．结果表明500℃焙烧制得的负载型催化剂显示较高的合成低碳烃活性和较低的合成低磷醇选择性，经800℃焙烧后，合成低磷醇的选择性大幅度提高．500℃焙烧的非负载K－Mo催化剂显示较高的合成醇选择性，经800℃焙烧后，促碳醇的选择性保持不变．用氨的吸附及TPD方法测定了各样品的酸性，并与催化剂活性对照，发现催化剂酸性越强，酸量越大，则其合成醇选择性越低．催化剂上的乙醇分解实验证实，催化剂的酸量大小与它的醇分解活性成正变关系，这些结果说明催化剂酸性对其合成醇性能有直接的影响．     

CexTi1-xO2复合氧化物的结构及负载CuO对NO还原性能研究

采用共沉淀法制备了不同摩尔比(x=0,0.1,0.2～0.9,1.0)的CexTi1-xO2复合氧化物,考察了CuO/CexTi1-xO2对NO+CO反应的活性,并用BET,TPR和XRD等技术对各试样进行了表征。结果表明,试样的结构和还原特性随焙烧温度变化而变化。XRD检测表明,x值从0.1增加到0.5时,650℃焙烧的试样已形成了CeTi2O6物相,且主要以无定形状态存在;试样经800℃焙烧后晶化完全;x>0.6时,一些TiO2已经进入了CeO2晶格,形成了Ce Ti固溶体。催化剂活性评价表明CuO/CexTi1-xO2(650℃)对NO+CO反应具有较好的活性,其活性随x值变化而变化。TPR及XRD结果表明CuO与CeTi2O6之间存在很强的相互作用,CeTi2O6物相的形成使CuO的还原峰温由380℃提前到200℃,而CuO的存在又促进CeTi2O6的还原峰温从600℃提前至200～300℃。     

Excess enthalpies of solution of some primary and secondary alcohols in sodium dodecylsulfate micellar solutions

The exces enthalpies of solution of some primary and secondary alcohols in aqueous sodium dodecylsulfate micellar solutions were measured and the results were explained by considering the distribution of alcohols between aqueous and micellar phases. The distribution constant and the enthalpy of transfer (and the standard free energy and entropy of transfer) were obtained. The thermodynamic parameters for the transfer of secondary alcohols from the aqueous to the sodium dodecylsulfate (NaDS) micellar phase differ slightly from those of the corresponding primary alcohols. For both series of alcohols the additivity rule holds for free energies of transfer whereas enthalpies and entropies display convex curves. The present data are compared to those for the transfer of the same solutes from the aqueous to the dodecyldimethylamine oxide (DDAO) and dodecyltrimethylammonium bromide (DTAB) micellar phases. The role of the hydrophilic interactions between the OH group and the micelles' head groups is formulated. The thermodynamics of the branched methyl group were determined. Furthermore, the thermodynamics of solvation of primary alcohols in water, in NaDS micelles, and in octane have been calculated using reference states based on the assumption that the empty space around alcohols in the initial and final states is the same. It is shown that the solvation of alcohols in NaDS micellar phase is enthalpy driven and that the thermodynamic properties of solvation vs. the length of the alcohol tail is the same for water and NaDS micelles whereas it is different for octane. A possible explanation for this difference is that the alkyl chain of alcohols folds in octane.     

含铝高速钢中奥氏体非均匀长大的机制

M2AI和M2高速钢经一次和二次淬火后,奥氏体晶粒和未溶碳化物的定量研究表明,在高温r/f比值相同的条件下,由于淬火前原始组织的差别,可发生正常(均匀)和异常(非均匀)两类长大。根据异常粗晶形成初期的组织观察,提出了“连续-非连续”再结晶模式和“合并—推移”式的生长机制。提出了减轻或消除M2AI钢混晶的工艺原则。     

The BKK root count in

The root count developed by Bernshtein, Kushnirenko and Khovanskii only counts the number of isolated zeros of a polynomial system in the algebraic torus . In this paper, we modify this bound slightly so that it counts the number of isolated zeros in . Our bound is, apparently, significantly sharper than the recent root counts found by Rojas and in many cases easier to compute. As a consequence of our result, the Huber-Sturmfels homotopy for finding all the isolated zeros of a polynomial system in can be slightly modified to obtain all the isolated zeros in .

     

拟协调轴对称三结点退化壳单元

结合拟协调有限元方法和退化壳有限元概念,构造了一个轴对称三结点退化壳单元,采用了整体,局部和等参三个坐标系,使用与拟协调单元列式方法等效的基于胡－鹫津广义为分原理的杂交／混合单元列式方法构造轴对称三结点退化壳单元;使用相同的等参坐标插值来假设应力和应变,插值既考虑到低阶项的完备,又借鉴了拟协调九结点四边形爱化壳单元的结构经验。为了确定应力应变的插值形式,进行了多次数值试验和单元刚度矩阵的特征值分析     

硫酸钡改性新型甲基化环糊精毛细管色谱柱柱行为的研究

在硫酸钡微晶对毛细管内壁改性的基础上,系统制备了甲基环糊精与不同混合固定液的毛细管色谱柱,从柱的分离选择性,惰性,柱效和分析准确性等方面作了较为系统的研究,并对环糊精的分离机理作了初步探索。     

方腔内混合对流换热的数值研究与模型实验

为研究方腔内混合对流向受迫对流过渡的临界参数,通过数值模拟和模型实验,得到了不同工况下的流场、温度场,并将数值结果与实验结果进行了对比,通过一系列的数值计算,取得了均匀通风方式时混合对流处于受迫对流占优状态、自然对流受到抑制时的特征参数,指出描述方腔内混合对流的特征参数Ｇｒ／Ｒｅｎ中的ｎ不等于２,并发现当自然对流引起的旋涡消失时,自然对流对换热仍有一定的影响。     

Synthesis and performance of HPTLC plates modified with cyanopropyl- and octadecyl-trichlorosilane

Chemical modification of commercial high performance thin-layer chromatography plates with various mixtures of cyano-propyltrichlorosilane and octadecyltrichlorosilane is described. Surface coverage by different treatments is demonstrated as well as the variations in chromatographic performance. With regard to the development in aqueous media the utility of CN/ ODS plates compared to ODS plates is also shown.     

Characterization of OV-1/FFAP-mixture coated glass capillary columns used for the separation of free fatty acids

As an alternative to acid pretreated UCON and FFAP capillaries for the analysis of wide-boiling free fatty acid mixtures, OV-1 : FFAP phase mixtures were used on high-temperature silylated inert glass capillary columns. The HETP-carrier gas velocity curves, peak asymmetry factors, coating efficiency, gas phase and stationary phase contributions to the mass transfer resistance were determined for various OV-1 : FFAP ratios. Mixed-phase capillaries showed optimum performance at a 2 : 1 OV-1 : FFAP ratio. The thermal and long-term stability of OV-1-stabilized FFAP columns surpassed those of the UCON and pure FFAP reference column used.