NH_4HCO_3作沉淀剂制备超细Ce-Zr-O粉末的研究

为寻求简便、合理的合成超细粉体的方法,利用NH4HCO3 作沉淀剂,通过考察料液配比、加料速度、升温速度等实验因素,得到了简单的合成超细 Ce Zr O粉末的工艺,并利用比表面积测定仪、激光粒度仪、XRD、Raman等仪器对相关产物进行了表征.结果表明:利用简单工艺合成的超细 Ce Zr O粉末具有中位粒径为0.30μm、比表面积为21.2 m2/g、悬浮性大于30 min、松装密度小于 1 g/cm3等性能,产物具有 CaF2 型的空间结构.     

大型径向和推力滑动轴承试验台结构设计与应用

对径向滑动轴承、推力滑动轴承试验台以及实验台的结构设计、试验范围、功能和工业产品实验进行了介绍。该试验台在滑动轴承的实验研究中得到了很好的应用。     

微型硅谐振式力传感器的振动分析

介绍了谐振式力传感器的工作原理，并从理论上和实验上对中科院合肥智能所研制的第一代微型硅谐振梁（３×０．４×０．０４５ｍｍ＾３）式测力传感器进行了全面的振动分析，所得结构为其进一步优化设计提供了科学根据，文中使用的实验分析方法，为其它微小物体的动态和识别提供了一条有效途径。     

正交试验法优化CS汽化吸附条件

通过正交试验设计,优化了影响西埃斯(CS)标准样品管制备的参数:汽化温度、采样流速、采样时间。结果表明,CS标准样品管的最佳吸附条件为汽化吸附温度:260℃,采样N2流速:330mL/min,采样时间:15min。在15~1500ng范围内,色谱峰面积与进样量有良好的线性关系,线性相关系数为0.9995,检出限为6.0ng。     

Compatibility Studies of Multicomponent Tablet Formulations. DSC and experimental mixture design

An experimental mixture design was applied to a differential scanning calorimetry (DSC) study performed to evaluate naproxen compatibility in tablet formulations consisting of four classic excipients (sorbitol, sodium carboxymethylcellulose, poly(ethylene glycol) 20000 and Veegum) each in adequate concentration ranges accounting for the relevant values actually used in pharmaceutical formulations. Twenty-seven different tablets were obtained from as many mixtures prepared according to the experimental design plan and analyzed in a random order by DSC. Statistical evaluation of experimental data enabled correlation of both enthalpy and onset temperature variations of drug melting endotherm (selected as responses indicative of the presence of drug-excipient interactions) with the mixture composition. Variance analysis (Anova) confirmed the reliability of the postulated polynomial model in providing adequate prediction of true system behaviour. This revised version was published online in August 2006 with corrections to the Cover Date.     

Plasma Thermal Conversion of Methane to Acetylene

This paper describes a re-examination of a known process for the direct plasma thermal conversion of methane to acetylene. Conversion efficiencies (% methane converted) approached 100% and acetylene yields in the 90–95% range with 2–4% solid carbon production were demonstrated. Specificity for acetylene was higher than in prior work. Improvements in conversion efficiency, yield, and specificity were due primarily to improved injector design and reactant mixing, and minimization of temperature gradients and cold boundary layers. At the 60-kilowatt scale cooling by wall heat transfer appears to be sufficient to quench the product stream and prevent further reaction of acetylene resulting in the formation of heavier hydrocarbon products or solid carbon. Significantly increasing the quenching rate by aerodynamic expansion of the products through a converging–diverging nozzle led to a reduction in the yield of ethylene but had little effect on the yield of other hydrocarbon products. While greater product selectivity for acetylene has been demonstrated, the specific energy consumption per unit mass of acetylene produced was not improved upon. A kinetic model that includes the reaction mechanisms resulting in the formation of acetylene and heavier hydrocarbons, through benzene, is described.     

铅笔芯修饰聚苯胺制作微型复合pH电极的性能

在0.3mm直径的铅笔芯上电修饰聚苯胺,封入玻璃毛细管中,并与Ag/AgCl电极组合成复合微型pH电极.经实验测试,该电极的pH响应特性良好,在pH1～11的线性范围内,能斯特斜率为(-56.4±0.5)mV/pH,线性相关系数不小于0.996.作为参比的Ag/AgCl电极性能稳定.由于电极是复合微型化的,所以可用于活体微区测定.     

组合桥面板疲劳荷载后剩余承载力试验研究

为了研究高性能混凝土组合桥面板经历疲劳荷载后的剩余承载力,设计制作了两个足尺的正交异性高性能混凝土组合桥面板,通过疲劳和静力加载试验测试了正交异性组合桥面板的静力承载能力、破坏形态与疲劳后剩余极限承载力。试验结果表明：正交异性高性能混凝土组合桥面板经历疲劳荷载后的静力破坏形态为受弯破坏,试件达到极限状态时中支点截面U肋屈曲,受拉钢筋屈服,负弯矩区混凝土板开裂严重,组合桥面板的受力性能发生退化。经过疲劳加载后的桥面板的剩余极限承载力较没有经过疲劳加载的桥面板承载力下降了约11.6%。基于钢筋混凝土黏结滑移理论推导了适用于疲劳荷载作用后的高性能混凝土组合桥面板平均裂缝间距计算公式。对比试验结果,所提出的平均裂缝间距计算公式具有良好的精度,可为实际工程应用提供理论参考。     

测长仪器数字化微机化改造中的精度保证

本文介绍了测长仪器数字化微机化改造中的精度保证方法:标尺倾斜调整法和计算机软件补偿法。作者将这些方法应用于万能工具显微镜的改造中,获得了满意的效果。该方法简单有效,而且亦适用于新测长仪器的制造。文中还对测长标尺的制造提出了“标尺刻度间距的公差带应正向单向布置”的指导性意见。     

改进的细菌转化试验方法

本文对“细菌转化实验方法”进行了改进。用改良碱酶法制备的质粒DNA(PBR322)作供体,转化经氯化钙处理的受体菌E.Coli C600,使后者获得抗氨苄青霉素和抗四环素的特性。改进后的转化方法操作简便,不受设备限制。