宁波市北仑区普通建筑石料矿产资源开发利用研究

针对宁波市北仑区矿产资源规划实施过程中存在的问题展开调查,调查包括议定方案、矿山实地调查、了解市场需求、综合分析资料。并对各种有待完善和需要调整、补充的问题提出应采取的对策和可操作性的建议。     

水热-溶胶-凝胶法合成多壁碳纳米管-Na3V2（PO4）3复合物及其作为锂离子电池正极材料的性能

采用水热和溶胶-凝胶相结合的方法,制备了具有良好电化学性能的新型多壁碳纳米管-Na₃V₂（PO₄）₃（MWCNT-NVP）复合材料（MWCNT的质量分数为8.74%）. 通过场发射扫描电子显微镜表征可知,MWCNT分散在NVP纳米颗粒之间,并起到“电子导电线”的作用. 与纯Na₃V₂（PO₄）₃相比,MWCNT-NVP具有更高的比容量和更优异的循环性能. 在0.2C（35.2 mA·g^-1）的电流密度下,3.0-4.5 V的电压范围内,MWCNT-NVP的初始比容量为82.2 mAh·g^-1. 循环100次以后,比容量为72.3 mAh·g^-1. 在1.0-3.0 V充放电时,MWCNT-NVP的初始容量为100.6 mAh·g^-1. 100次循环以后,其容量保持率高达90%. 同时,交流阻抗测试表明,由于MWCNT的存在,MWCNT-NVP的导电性有了显著的提高. 以上结果表明,MWCNT-NVP是一种良好的锂离子电池电极材料.     

论卤盐养生（10）

卤盐（包括食盐）是中国矿物药的重要组成部分。从文化价值、临床应用和情志调摄3个方面诠释了卤盐的养生学意义,并全面、详细地阐述了食盐对中国古代文化的四大贡献、6种盐类的现代临床应用价值以及盐湖旅游的6项要素;列举了160多个盐湖卤水的主要化学成分、矿化度或微量元素;摘录了论述卤盐主治功用的古今文献。本文分期刊出。     

白花败酱矿物质元素分析与利用

目的对野生白花败酱与栽培白花败酱8种矿物质元素进行了测定、分析与利用。方法采用火焰原子吸收分光光度法。结果白花败酱的嫩茎叶含有丰富的K、Ca、Na、Mg常量元素和Fe、Mn、Cu、Zn微量元素,栽培种的Mn含量是野生种的4倍多。结论白花败酱可作蔬菜食用,同时对土壤中的Mn有富集能力。     

Polyanionic Frameworks in the Lithium Phosphidogermanates Li2GeP2 and LiGe3P3 – Synthesis,Structure, and Lithium Ion Mobility

Recently fast lithium ion conductors were discovered in compounds containing tetrahedral SiP₄^8– and GeP₄^8– units. In the context of material development for all solid state batteries the ternary Li/Ge/P phase system has been further investigated and two new lithium phosphidogermanates were discovered on the lithium poor side of the ternary composition diagram. Li₂GeP₂ crystallizes in space group I4₁/acd with unit cell parameters of a = 12.3069(1) Å and c = 19.0306(4) Å, consists of a framework of Ge₄P₁₀ supratetrahedra, and exhibits an ionic conductivity of 1.5(3)×10^–7 S · cm^–1 at 27 °C. LiGe₃P₃ crystallizes in Pbam with a = 9.8459(5) Å, b = 15.7489(7) Å, and c = 3.5995(2) Å. In LiGe₃P₃ Ge and P atoms form a two dimensional polyanion. The slabs consist of five- and six-membered heteroatomic rings comprising GeP₄ and Ge(P₃Ge) tetrahedra including homoatomic Ge–Ge bonds. A semiconducting behavior with an electronic conductivity of ∼10^–4 S · cm^–1 and a remarkable stability vs. air and moisture is observed.     

Characterization and electrochemical deposition of natural melanin thin films

Melanin is an important class of biological pigments because of its distinct chemical and physical properties. The electrochemical deposition of natural melanin thin films was studied using two different techniques; constant potential and cyclic voltammetry along with a deposition time of five hours. The thin films deposited electrochemically on a fluorine-doped tin oxide conductive glass substrate using the constant potential method, exhibited faster growth rate and better adhesion to the fluorine-doped tin oxide working electrodes than those deposited using the cyclic voltammetry method. The thin films deposited on the fluorine-doped tin oxide conductor glass using the constant potential method were also more homogeneous than those deposited via the cyclic voltammetry technique. The increase of film thickness is related to the increase of electrochemical deposition time. Interestingly, the electrochemical deposition using the constant potential method had the advantage of consuming less electric charge. The physical and chemical structures of the melanin thin films were characterized using ultraviolet–visible absorption spectroscopy, Fourier-transform infrared spectroscopy, and X-ray diffraction analysis. The ultraviolet–visible absorption spectra showed the correlation between the variation of deposition rates of melanin and the type of electrochemical technique employed as well as the thickness of the film. The average thickness of the film is 500 nm which absorb 40% of light in both type of films. The atomic force microscopy images illustrated the homogeneous deposition of the melanin molecules on the fluorine-doped tin oxide conductive glass substrate, indicating that the thickness of the thin films can be controlled. We estimated an average grain size of 14.093 Å. The ease of preparing such thin films of organic materials can open new avenues towards the use of soft conductors, in contrast to the complex preparation of industrial semiconductors.     

三种丛枝菌根真菌对百喜草生长、矿质元素含量及抗旱性的影响

研究了三种丛枝菌根(AM)真菌Glomus Aggregatum(G.a)、G.etunicatum(G.e)和G.intraradices(G.i)对百喜草(Paspalum notatum)生长、矿质元素含量及干旱胁迫下几种生理指标的影响.3种AM真菌处理显著提高了主根长和地上部干重,菌根依赖性依次为G.a>G.i>G.e.G.a和G.e接种株根部P、K、Mg、Cu含量,G.i接种株根部P、Mg、Ca含量及G.e接种株根部Ca含量均显著高于对照;G.a接种株地上部P、K、Mg、Ca和Zn含量与对照无显著性差异,而G.e和G.i处理的地上部P、K、Mg、Ca和Cu含量均显著低于对照.干旱胁迫4d时,G.a和G.e处理的地上部POD活性、G.a处理的地上部脯氨酸含量均显著高于对照.干旱胁迫8 d时,各接种株的SOD和POD活性与对照并无显著性差异,而接种AM真菌显著提高了地上部脯氨酸含量,G.e和G.i处理的MDA含量显著低于对照.三种AM真菌以G.a接种处理一定程度上提高了百喜草的生长及抗旱性,而G.e和G.i的效果相对较弱.     

Optimization model of a structural simulation design for a CICC

The engineering design of a Cable-In-Conduit Conductor (CICC) is complicated. A model for the optimal design of a CICC based on conductor stability, AC loss and strain is proposed. The model considers the critical current density as a function of applied strain. A mathematical programming method that minimizes the AC loss of the CICC is established to yield an optimal design for the CICC structure. The optimized structure and related performance agree well with the engineering design values used for the KSTAR project.     

石膏矿床地下开采危险危害因素分析及安全对策

本文针对当前我国石膏矿床地下开采过程中重大特大事故不断的局面,分析了石膏矿床地下开采过程中存在的危险危害因素,指出采空区大面积坍塌是当前我国石膏矿床地下开采过程中最重要的危险危害因素.从安全管理和安全技术等方面提出的安全对策,对于促进矿山企业安全生产,保护矿工生命安全与健康,具有较大意义.