Optimum gas chromatographic conditions in wall-coated capillary columns. Extended and simplified forms of the Golay-equation

Band broadening in capillary columns is satisfactorily described by the Golay-equation extended to situations of appreciable pressure drop by Giddings. In practice, however, several simplifications are often made. The effect of these simplifications on the calculated values of the minimum plate height and optimum carrier gas velocity are treated systematically.     

Highly visible-light luminescence properties of the carboxyl-functionalized short and ultrashort MWNTs

Luminescence of the short multiwalled carbon nanotubes (MWNTs) conjugated with carboxylic acid groups has been studied. The results show that the carboxyl-functionalized short MWNTs could emit luminescence and the emission peak appears at 500 nm with a corresponding optimal excitation wavelength centering at 310 nm. When the short MWNTs are filtered through 0.15 μm polytetrafluoroethylene (PTFE) membrane, the ultrashort MWNTs are obtained from the filtrate. An interesting feature for the ultrashort MWNTs is that the emission intensity is strengthened and the peak is slightly blue shifted to 460 nm. This result indicates that the luminescence properties of MWNTs are strongly affected by the tube length. After chemical oxidization cutting, defects and carboxylic acid groups at the tube end and/or sidewall can be produced; the more shorten of MWNTs, the better dispersion and carboxylic passivation of the nanotubes, and the more intense luminescence emissions. The broad emissions are logically attributed to the trapping of excitation energy by defect sites in the carboxyl-functionalized nanotube structure.     

USING MEASURING METHOD TO FIND AREA OF ENCLOSED PLANE REGION AND VOLUME OF ENCLOSED SPACE REGION

Two simple methods to calculate the area and volume called improved square gridmethod and cube cutting method are proposed in this paper. For any plane curve orspace surface satisfying certain conditions, by our method, the error of measurement isof the second infinitive order of measuring unit (the side length of the square grid or theside length of the little cube) when the unit is small enough. And when some properties ofthe curve or the surface can be found or its varying bounds can be evaluated, it is pointedout, in order to make the error smaller than any given value, how small the length of themeasuring unit should be.     

制备高比表面积碳化硅的几种影响因素

采用溶胶凝胶法，以蔗糖和正硅酸乙酯(TEOS)为原料，草酸为TEOS水解的催化剂，制备均相碳化硅前驱体，在氩气氛和高温条件下(1 350～1 600 ℃)将碳化硅先驱体进行碳热还原，制备出高比表面积的SiC。考察了水/TEOS物质的量的比、碳/硅物质的量的比及镍盐等因素对碳化硅比表面积的影响。结果表明，当n_water/n_TEOS=7.5，n_C/n_Si=4时，适宜的镍催化剂(n_Ni/n_TEOS=0.005)，凝胶形成的时间最短，镍盐的加入可使碳热还原温度降低200 ℃。     

Microbial synthesis and characterization of physiochemical properties of polyhydroxyalkanoates (PHAs) produced by bacteria isolated from activated sludge obtained from the municipal wastewater works in Hong Kong

The first objective of this study was the measurement of physical properties of P(3HB-co-3HV) copolymers with different (hydroxybutyrate) HB to (hydroxyvalerate) HV ratios produced by Bacillus cereus (TRY2) isolated from activated sludge. The 3HV PHBV copolymers were 0.05, 22.6, 39.2, 54.1, and 69.1 mol%, respectively. The second objective was to study possible wastewater treatment and production of PHAs at the same time by B. cereus (TRY2) and Pseudomonas spp. (TOB17) (both were isolated from activated sludge), recombinant Bacillus DH5α, and a combination of the above three bacteria. The results were satisfactory; the maximum COD and TOC of the sewage sludge reduced were 53.5% and 67.5%, respectively.     

Three-dimensional structural features and the toxicity of aminobenzenes and phenols

There are many organic pollutants in the environment, such as polychlorinated biphenyl, polycyclic aromatic hydrocarbons, dichlorodiphenyl-trichloroethane (DDT), and polychlorinated naphthalene. These organic pollutants are persistent,liposoluble and easily cumulated in organism; consequently, the potential toxicity will be high. Risk assessment of industrial chemicals is currently carried out using scanty experimental data, because many of these chemicals have very little or no test data. S…     

Classification of cultivation area of ginseng by near infrared spectroscopy and ICP-AES

A rapid and nondestructive near infrared (NIR) method using soft independent modeling of class analogy (SIMCA) for the classification of cultivation area (Korea and China) was evaluated and confirmed. Raw, first, and second derivative NIR spectra were compared to develop a robust classification rule. The chemical properties of ginseng samples were also investigated to find out the differences between Korean samples and Chinese samples. These differences make NIR spectroscopic method viable. The average value of each Korean and Chinese ginseng sample for crude fiber, crude protein, starch, and 10 inorganic constituents were measured and compared with F-test and t-test. The inorganic constituents were also measured by induced coupled plasma-atomic emission spectroscopy (ICP-AES). It could be found that the amount of starch and ten inorganic elements for example Na, Mg, P, K, Ca, Mn, Fe, Ni, Cu and Zn in ginseng samples are considerably different based on cultivation area. SIMCA has been applied to the inorganic data to investigate the possibility of ICP-AES as classification tool. However, it was observed that the result was not equal to than NIR spectra data. The overall results showed the availability of NIR method using SIMCA would be adequate for classification of cultivation of ginseng, since NIR spectra includes useful and various information on chemical properties in spite of broad and overlapped bands.     

IMPACT PROPERTIES OF METALLOCENE - CATALYZED ETHYLENE-α-OLEFIN COPOLYMERS

The impact properties of two selected metallocene-catalyzed ethylene-butene copolymers and one conventionalcopolymer were evaluated using Izod impact test. It is found that the metallocene-catalyzed copolymer shows superior impactproperties. This result was explained on the basis of the more homogeneous inter-molecular composition distribution andnarrower molecular weight distribution, which leads to more homogeneous morphology with fewer defects. Stepwisecrystallization improves the impact properties, especially in the crack propagation process, to a large extent. This is due to thedecrease of entanglements by stepwise crystallization, which is advantageous for the chain slip and shear. The polymer withheterogeneous intra-molecular composition distribution exhibits a more evident improvement of impact properties understepwise crystallization.     

Hydrogen peroxide in basic media for whole blood sample dissolution for determination of its lead content by electrothermal atomization atomic absorption spectrometry

Hydrogen peroxide in basic media is proposed as a means for dissolving whole blood samples to be analyzed by electrothermal atomization atomic absorption spectrometry, ET AAS. Approximately 2 g of the whole blood sample were directly weighed in a 150 mL volumetric flask; 3 mL of a NaOH 0.2 mol L⁻¹ solution, two drops of 1-octanol, as an antifoaming agent, and 1 mL of 30% volume hydrogen peroxide were added to the flask to promote oxidation. The solution was then manually shaken and after approximately three minutes of shaking, a clear solution, with no apparent suspended solids or greasy layers, was obtained. Distilled-deionized water was used to complete the volume. Ten μL of the resulting solution along with 10 μL of a solution containing 5000 mg L⁻¹ of NH₄H₂PO₄ and 300 mg L⁻¹ of Mg(NO₃)₂ as a modifier, were injected into transversely heated graphite tubes for lead determination. Both aqueous standards and standard addition calibration curves produced results not significantly different at a 95% confidence limit level. Accuracy of the measurements was assessed by analysis of the IAEA A-13 (concentration of trace and minor elements in freeze dried animal blood) standard reference material containing 0.18 mg L⁻¹ lead on a dry basis and by means of recovery tests. Analysis of the IAEA A-13 standard produced 0.17 ± 0.02 mg L⁻¹ lead on a dry basis; recovery tests afforded values from 95 to 105%. Ten consecutive measurements of a 5 ppb lead solution gave a characteristic mass of 47.2 pg and a (3S) detection limit of 1.77 μg L⁻¹ Pb. Results obtained from analysis of whole blood samples of volunteer donors covered a lead concentration range between 8 and 21 μg L⁻¹ with a mean value of 11.9 ± 4.7 μg L⁻¹.     

INTROMISSION OF WATER-REPELLENT AND HYDROSCOPIC PROPERTIES SIMULTANEOUSLY TO PP BY PLASMA DISCHARGE METHOD

Plasma-induced surface graft copolymerization of acrylic acid on polypropylene non-woven fabric (PP-g-AA) and polypropylene membrane were reported. The extents of grafting were controlled by the plasma and polymerization condition. Hexadecyltrimethyl ammonium bromide was then coupled with the carboxyl group of PP-g-AA to obtain a polyion complex (PIC). At last, CF4 plasma was used to give PICs hydrophobic property. The moisture regain and water-repellency of the processed PICs was investigated. The surfaces were characterized using ATR FT-IR and XPS. The result indicates that the products have very high ability to adsorb moisture, even better than cotton fiber. At the same time, the products show excellent hydrophobic property, which can‘t be wetted by those reagents whose surface tensions were higher than 327mN/m.