Facile preparation of MgAl2O4/CeO2/Mn3O4 heterojunction photocatalyst and enhanced photocatalytic activity

Novel Mn₃O₄-promoted double p?n junction MgAl₂O₄/CeO₂/Mn₃O₄ heterojunction photocatalyst was constructed by one-step synthesis method and two-step synthesis method. The X-ray powder diffraction, Fourier transform infrared spectrum, X-ray photoelectron spectroscopy, optical and photoluminescence demonstrated that the MgAl₂O₄/CeO₂/Mn₃O₄ heterojunction photocatalyst was synthesized by the two-step synthesis method comprehends a high crystallinity, charge carrier migration and separation efficiency, and relatively low optical absorption coefficient. The MgAl₂O₄/CeO₂/Mn₃O₄ heterojunction photocatalysts were efficiently used as simulated sunlight-driven n-n and p-n double junction photocatalyst for the simultaneous degradation of methylene blue (MB) dye. The continuous double p?n junction MgAl₂O₄/CeO₂/Mn₃O₄ heterojunctions strengthened the function of single n-n or p-n junction and guided the charge carrier migration and separation direction; thus, the oxidation and reduction reactions occur at the active site of spatial separation and prevent the recombination of electrons and holes. The results suggest that the continuous double p?n junction MgAl₂O₄/CeO₂/Mn₃O₄ heterojunctions are very promising candidate material for enhancing the photocatalytic activity in the photocatalytic degradation of MB dye.     

Defect Engineering and Anisotropic Modulation of Ionic Transport in Perovskite Solid Electrolyte LixLa(1−x)/3NbO3

Solid electrolytes, such as perovskite Li_3xLa_2/1−xTiO₃, Li_xLa_(1−x)/3NbO₃ and garnet Li₇La₃Zr₂O₁₂ ceramic oxides, have attracted extensive attention in lithium-ion battery research due to their good chemical stability and the improvability of their ionic conductivity with great potential in solid electrolyte battery applications. These solid oxides eliminate safety issues and cycling instability, which are common challenges in the current commercial lithium-ion batteries based on organic liquid electrolytes. However, in practical applications, structural disorders such as point defects and grain boundaries play a dominating role in the ionic transport of these solid electrolytes, where defect engineering to tailor or improve the ionic conductive property is still seldom reported. Here, we demonstrate a defect engineering approach to alter the ionic conductive channels in Li_xLa_(1−x)/3NbO₃ (x = 0.1~0.13) electrolytes based on the rearrangements of La sites through a quenching process. The changes in the occupancy and interstitial defects of La ions lead to anisotropic modulation of ionic conductivity with the increase in quenching temperatures. Our trial in this work on the defect engineering of quenched electrolytes will offer opportunities to optimize ionic conductivity and benefit the solid electrolyte battery applications.     

The Effect of Hispidulin,a Flavonoid from Salvia plebeia,on Human Nasopharyngeal Carcinoma CNE-2Z Cell Proliferation,Migration, Invasion,and Apoptosis

Nasopharyngeal carcinoma (NPC) is a common malignant head and neck tumor. Drug resistance and distant metastasis are the predominant cause of treatment failure in NPC patients. Hispidulin is a flavonoid extracted from the bioassay-guided separation of the EtOH extract of Salvia plebeia with strong anti-proliferative activity in nasopharyngeal carcinoma cells (CNE-2Z). In this study, the effects of hispidulin on proliferation, invasion, migration, and apoptosis were investigated in CNE-2Z cells. The [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] (MTT) assay and the colony formation assay revealed that hispidulin could inhibit CNE-2Z cell proliferation. Hispidulin (25, 50, 100 μM) also induced apoptosis in a dose-dependent manner in CNE-2Z cells. The expression of Akt was reduced, and the expression of the ratio of Bax/Bcl-2 was increased. In addition, scratch wound and transwell assays proved that hispidulin (6.25, 12.5, 25 μM) could inhibited the migration and invasion in CNE-2Z cells. The expressions of HIF-1α, MMP-9, and MMP-2 were decreased, while the MMPs inhibitor TIMP1 was enhanced by hispidulin. Moreover, hispidulin exhibited potent suppression tumor growth and low toxicity in CNE-2Z cancer-bearing mice at a dosage of 20 mg/kg/day. Thus, hispidulin appears to be a potentially effective agent for NPC treatment.     

Fabrication and characteristics of self‐aggregation nanoparticles used for conformance control treatment

In order to alleviate the contradiction between injectability of the profile control agent and its profile control performance, a novel core‐shell heterogeneous structure colloidal particles (CSA) were synthesized, and the mechanism of self‐aggregation plugging was proposed. Cross‐linking inside the nanoparticles and chain‐growth polymerization via capturing acrylamide in the aqueous phase result in the formation of core‐shell heterogeneous structures as proved by TEM observation and XPS analysis. Moreover, CSA nanoparticles exhibit good hydrophilic properties, outstanding thermal stability and limited expansion capacity. Effects of different metal cations and surface group on the self‐aggregation time of CSA nanoparticles were systematically studied. Results showed that divalent cations contributed to more significant aggregation of CSA nanoparticles in comparison to monovalent cations. The increasing cations concentration and valency decreased the thickness of electric double layer, which lead to a decrease in the zeta potential. Core flooding test shows that the injection of nanoparticles which diameter is much smaller that of pore‐throats into the target reservoir can not only successfully enter the depth of porous media, but also effectively block the high permeability areas by the formation of self‐aggregation particle clusters. This study provides a new method for the equilibrium between nanoparticles injectivity and in‐depth profile control of nanoparticles.     

Curcumin Analogue L48H37 Suppresses Human Osteosarcoma U2OS and MG-63 Cells’ Migration and Invasion in Culture by Inhibition of uPA via the JAK/STAT Signaling Pathway

Osteosarcoma, the most prevalent malignant bone tumor in the pediatric age group, is responsible for the great majority of cancer-associated deaths owing to its highly metastatic potential. The anti-metastatic effects of the new curcumin analogue L48H37 in human osteosarcoma are still unknown; hence, we investigated whether L48H37 represses human osteosarcoma cells’ biological behavior of migratory potential and invasive activities and attempted to delve into its underlying mechanisms. L48H37 up to 5 μM inhibited, without cytotoxicity, the motility, migration, and invasion of human osteosarcoma U2OS and MG-63 cells. In U2OS cells, the human protease array revealed an obvious decrease in urokinase plasminogen activator (uPA) expression after L48H37 treatment, and L48H37 actually reduced the level, protein and mRNA expression, and promoter activity of uPA dose-dependently. L48H37 decreased the phosphorylation of STAT3, JAK1, JAK2, and JAK3 in U2OS cells, but did not affect the phosphorylation of ERK, JNK, p38, and Akt. Using colivelin, an activator of STAT3, the L48H37-induced decrease in uPA and migratory potential could be countered as expected. Collectively, L48H37 represses the invasion and migration capabilities of U2OS and MG-63 cells by the suppression of uPA expression and the inhibition of JAK/STAT signaling. These results suggest that L48H37 may be a potential candidate for anti-metastatic treatment of human osteosarcoma.     

Fe(II) Spin Crossover/Polymer Hybrid Materials: Investigation of the SCO Behavior via Temperature-Dependent Raman Spectroscopy,Physicochemical Characterization and Migration Release Study

Polymeric composites constitute an appealing class of materials with applications in various fields. Spin crossover (SCO) coordination complexes are switchable materials with potential use in data storage and sensors. Their incorporation into polymers can be considered an effective method for their wider practical application. In this study, Fe(II) SCO/polylactic acid hybrid polymeric composites have been prepared by film casting. The mononuclear coordination complex [Fe{N(CN)₂}₂(abpt)₂] was incorporated into polylactic acid. The morphological, structural and thermoanalytical characterization of the composite films were performed via scanning electron microscopy (SEM), attenuated total reflectance (ATR/FTIR), Raman spectroscopy and differential scanning calorimetry (DSC). In addition, the migration release study (MRS) of the SCO compound from the polymeric matrix into the food simulant 50% v/v water/ethanol solution was also examined via UV/Vis absorption. Of particular interest was the investigation of the SCO behavior of the coordination complex after its incorporation into the polymer matrix; it was accomplished by temperature-dependent micro-Raman spectroscopy. The described attempt could be considered a preparatory step toward the development of SCO-based temperature sensors integrated into food packaging materials.     

Theoretical study on the mechanism of thieno[3,2‐b]benzofuran bromination: the importance of Lewis and non‐Lewis type NBOs interactions along the reaction path

A density functional theory study has been performed to estimate the electrophilic thieno[3,2‐b]benzofuran bromination reaction. Optimized structures for all stationary points were examined by employing the B3LYP and BMK at the 6‐31++G(d,p), 6‐311G(d,p), and 6‐311++G(d,p) levels of theory. The solvent polarity has a significant effect on a reduction of activation energies barriers. The reaction involves the formation of a triangle complex, migration of a proton through the bromine moiety followed by ionization of the bromine bond, and activation to the σ‐complex. Finally, the σ‐complex transforms into the reaction products. The natural bond orbital (NBO) population analysis was performed along the reaction minimal energy path defined as a function of the intrinsic reaction coordinate (IRC). The evolution of interaction energies between filled and empty NBOs along IRC has been estimated. The importance of these interactions for the disruption of Br?Br and C?H bonds and creation of C?Br and H?Br bonds have been emphasized. The changes in NBOs hybridization, covalency effects, electrostatic potential density maps, and occupancy of natural bonds have been investigated along IRC. The results obtained explain well the essence of bonding transformations and electron density changes during the reaction. Copyright © 2015 John Wiley & Sons, Ltd.     

对象迁移自动机在TDT中的聚类研究

对象迁移自动机(OMA)是一种能够较好地解决话题识别与跟踪(TDT)中聚类问题的方法,但是,传统OMA模型由于聚类速度慢等缺点,难以满足TDT实时和增量聚类的要求.针对这一问题,本文一方面改进传统的OMA模型中自动机的动作设计,同时提出文档选择策略,加快了OMA的聚类速度.改进的方法在中等文档集上进行了实验,实验结果表明,该方法具有较好的聚类效果.     

Numerical simulations of viscoelastic particle migration in a microchannel with triangular cross-section

The migration of a spherical particle immersed in a viscoelastic liquid flowing in a microchannel with a triangular cross-section is investigated by direct numerical simulations under inertialess conditions. The viscoelastic fluid is modeled through two constitutive equations to investigate the effect of the second normal stress difference and the resulting secondary flows on the migration phenomenon. The results are presented in terms of trajectories followed by the particles released at different initial positions over the channel cross-section in a wide range of Weissenberg numbers and confinement ratios. Particles suspended in a fluid with a negligible second normal stress difference migrate toward the channel centerline or the closest wall, depending on their initial position. A much more complex dynamics is found for particles suspended in a fluid with a relevant second normal stress difference due to the appearance of secondary flows that compete with the migration phenomenon. Depending on the Weissenberg number and confinement ratio, additional equilibrium positions (points or closed orbits) may appear. In this case, the channel centerline becomes unstable and the particles are driven to the corners or “entrapped” in recirculation regions within the channel cross-section. The inversion of the centerline stability can be exploited to design efficient size-based separation devices.