矿物掺合料对页岩陶粒混凝土抗压强度的影响

以页岩陶粒混凝土为基础配方,系统研究了单掺和双掺不同含量的偏高岭土、粉煤灰、钢渣等矿物掺合料对其抗压强度影响,通过SEM和XRD进行了相关的微观结构和组成分析.结果表明当单掺矿物掺和料质量分数为10%时,页岩陶粒混凝土达到最高的抗压强度;双掺和时,总掺量为10%(质量分数)、比例为1∶2的偏高岭土和粉煤灰时,页岩陶粒混凝土的抗压强度最好,其3d、7d和28d的抗压强度分别达到了18.1、28.6和35MPa,对比没有加入矿物掺合料的页岩陶粒混凝土的抗压强度分别增加了417%、267%和250%,主要原因是偏高岭土和粉煤灰的掺加能够优化轻骨料混凝土的微观结构,对强度具有较大贡献.     

基于粘结强度特征数的烧结矿强度评价方法

烧结矿的强度主要取决于含铁矿物的强度、粘结相自身的强度以及粘结相与含铁矿物间的粘结强度。研究表明粘结相与含铁矿物间的粘结强度是烧结矿强度的主要制约因素。将粘结强度与能满足工厂生产要求标准的烧结矿粘结强度(12.58 MPa)的比值定义为粘结强度特征数,并用其评价烧结矿的整体强度。同时,结合烧结矿的微观结构对烧结矿强度进行研究。结果表明,与粘结相自身微观结构相比,粘结相与含铁矿物界面的微观结构较为疏松;固液两相之间的冷收缩系数不同,粘结相与含铁矿物之间易形成内应力,不利于粘结强度的提高。因此,粘结强度满足一定要求时,烧结矿的强度就能满足生产要求。     

激光重熔高速电弧喷涂FeNiCrAl涂层的组织与断裂韧性

采用激光技术对高速电弧喷涂FeNiCrAl涂层进行重熔处理.分析了重熔前后涂层的组织结构、物相成分、显微硬度与断裂韧性.结果表明:重熔后,喷涂层片层状堆叠结构与孔隙得到消除,组织结构变得均匀、致密,涂层与基体由机械结合变为冶金结合.喷涂层物相主要有α-Fe及金属间化合物AlFe₃,AlFe和Al_0.4Fe_0.6,重熔后,生成了新相Fe-Cr,［Fe, Ni］固溶体和碳化物NiC_○x.重熔后涂层的平均显微硬度为7.79GPa,约为基体硬度(2.5GPa)的3倍,约为喷涂层硬度(6.0GPa)的1.3倍.载荷为4.9,9.8N时,喷涂层的压痕尖头出现裂纹,涂层平均断裂韧性为1.20MPa·m^1/2,载荷为2.94~9.8N时,重熔后涂层的压痕尖头均没有观察到裂纹.     

Ti微合金化汽车大梁钢510L的组织性能

通过层流冷却及卷取过程模拟实验和实验室热轧实验研究了冷却工艺参数对Ti微合金化汽车大梁钢510L组织性能的影响规律,并在生产现场进行了工业试制.结果表明,大冷速有利于弥散细小的TiC粒子析出,冷速和终冷温度对实验钢强度的影响是细晶强化、析出强化和相变强化共同作用的结果,N含量显著影响Ti的析出强化效果,在冶炼时应严格控制钢中的N含量,否则将对钢板的性能产生较大的影响.实现了低成本Ti微合金化汽车大梁钢510L的批量稳定生产.     

Lattice orientation within stirring-induced crystals of polyethylene

Micro-shish-kebab stirring-induced polyethylene crystals, as defined and described in the preceding paper, are flat, ribbon-shaped fibers. Selected area electron-diffraction techniques were used to determine the orientation of the crystal axes with respect to the external fiber shape. It has been shown that in addition to the crystal-lographic c-axis laying along the fiber direction, the normal to the ribbon plane is parallel to the crystallographic a-axis.     

Stroboscopic microscopy—direct imaging of structure development and phase separation during spin‐coating

Spin‐coated polymer blends possess a rich variety of accessible non‐equilibrium morphologies, formed through a process of phase separation and self‐assembly, the complexities of which remain incompletely understood. The technique of stroboscopic microscopy has now been developed to allow direct observations of microscopic and mesoscopic morphological development during spin‐coating and has afforded unequivocal information regarding morphological development. The technique so far has three modes of operation providing information on topographical, compositional, and crystal development. In this review, we look at the technique's development, its applications and comment on the future potential for this technique. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 17–25     

Limit theorems for the pre-averaged Hayashi–Yoshida estimator with random sampling

We will focus on estimating the integrated covariance of two diffusion processes observed in a nonsynchronous manner. The observation data is contaminated by some noise, which possibly depends on the time and the latent diffusion processes, while the sampling times also possibly depend on the observed processes. In a high-frequency setting, we consider a modified version of the pre-averaged Hayashi–Yoshida estimator, and we show that such a kind of estimator has the consistency and the asymptotic mixed normality, and attains the optimal rate of convergence.     

简单方法制备与表征新颖复合凝胶及表面微结构——由科研成果转化的化学综合实验

材料表面的微结构会赋予材料独特的性能，水凝胶在生物医学领域有广泛的应用前景。采用紫外光刻蚀法创新性地实现了复合凝胶的制备和凝胶表面图案化微结构的构筑一步完成；通过原子力显微镜和光学显微镜的表征，复合凝胶聚N-异丙基丙烯酰胺/聚乙二醇二丙烯酸酯兼具了温敏性能与图案化微结构的新颖性能结构特征。本实验有助于培养学生的创新意识，激发学生的学习兴趣以及未来从事科研的兴趣。     

Analysis of polished polycrystalline diamond using dual beam focused ion beam microscopy

This paper presents a study on polycrystalline diamond (PCD) polished by dynamic friction polishing (DFP) with the aid of advanced dual beam FIB (focused ion beam) microscopy. After disclosing a variety of wear tracks by DFP using electron imaging in combination with the ion channelling effect, a dual beam FIB was successfully employed at wear track sites to specifically create both the large cross-sectional specimen for microanalysis and thin foil for nanoanalysis. The study concluded that the polished PCD subsurface was free from microscale cracking. However, the attached debris layer on the top surface contained metal oxides and non-diamond carbon phase with inhomogeneous distributions of C, Fe, Cr, Ni, Si and O across the layer. An attached layer directly above a diamond grain was composed of essentially amorphous carbon, suggesting that a direct phase transformation from diamond crystalline to amorphous occurred during DFP.     

Living anionic polymerization of (E)‐1,3‐pentadiene and (Z)‐1,3‐pentadiene isomers

The anionic polymerization of (E)‐1,3‐pentadiene (EP) and (Z)‐1,3‐pentadiene (ZP) together with mixture of the E/Z isomers are investigated, respectively. The kinetic analysis shows that the activation energy for EP (86.17 kJ/mol) is much higher than that for ZP (59.03 kJ/mol). GPC shows that it is the EP rather than the ZP isomer that undergoes anionic living polymerization affording quantitative products of the polymers with well‐controlled molecular weights and narrow molecular weight distributions (1.05 ≤? ≤ 1.09). In addition, THF as polar additive has proved its validity to reduce the molecular weight distribution of poly(ZP) from 1.38 to as low as 1.19. The microstructure and sequence distributions of polypentadiene are characterized by ¹H NMR and quantitative ¹³C NMR. Finally, the distinctive reaction activity of two isomers can be elucidated by two different mechanisms which involve the presence of four forms of zwitterions for EP and the typical [1,5]‐sigmatropic hydrogen‐shift phenomenon for ZP. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2291–2301