SiO_2微球固相萃取-火焰原子吸收光谱法测定水样中痕量Ag(Ⅰ)

本文通过水热合成法制备了SiO2微球,并研究SiO2微球在弱碱性条件下对Ag(Ⅰ)的吸附性能,建立了SiO2微球固相萃取-火焰原子吸收光谱法(AAS)测定痕量Ag(Ⅰ)的新方法。结果表明:在0.02mol·L-1 NaOH溶液介质中,Ag(Ⅰ)能被定量吸附,且能被2.0mL的12g·L-1硫脲-4%HCl混合液快速定量洗脱。方法的检出限(3σ)为0.59μg·L-1,富集倍数为50。该方法用于水样中痕量Ag(Ⅰ)的测定,加标回收率在95.0%~104.0%范围。     

A dual microsphere based on PLGA and chitosan for delivering the oligopeptide derived from BMP-2

In this paper, we document the process and findings of preparing dual poly (lactide-co-glycolide)/chitosan microspheres (PLGA/CS MSs) for osteoinductive oligopeptide derived from BMP-2 (abbreviated as Peptide-24). Through adjusting the amount of Peptide-24, three kinds of PLGA/CS MSs were successfully constructed in twice encapsulations. We studied the morphology, size distribution and loading efficiency of the PLGA/CS MSs. We also focused on the pH change of the environment and the molecular weight of the matrix during the degradation process of PLGA/CS MSs. More specifically, the release of Peptide-24 from three kinds of PLGA/CS MSs was monitored in PBS at 37 °C and pH 7.4. The structural stability of the released Peptide-24 was detected by Far-UV circular dichroism and MALDI-TOF-MS analysis. The mean sizes of the three kinds of PLGA/CS MSs are 47.5, 63.0 and 89.1 μm; and their drug-loading rates are 2.61, 3.21 and 2.21%, respectively. Comparing with Chitosan microspheres (abbreviated as CS MSs), the PLGA/CS MSs have excellent release curves with zero-order kinetics and controllable model. The incubation solution of PLGA/CS MSs avoided producing acid environment as poly (lactide-co-glycolide) microspheres (PLGA MSs) did, which was explained by analyzing the molecular weight of the matrix. The released oligopeptide kept its original structure and relative molecular weight throughout the procedures of encapsulation, storage and release. This indicates its structure stability. Thus, we conclude that dual PLGA/CS MSs is a promising vehicle that is suitable for the delivery of bioactive factors.     

Stimuli-responsive multilayer chitosan hollow microspheres via layer-by-layer assembly

Novel stimuli-responsive multilayer chitosan hollow microspheres with chitosan as the unique component have been fabricated by the sequential layer-by-layer electrostatic assembly technique from the sacrificial templates (polystyrene sulfonate, PSS) with chitosan (CS) as the polycation and carboxymethyl chitosan (CMCS) as the polyanion, respectively. Their hollow structure was confirmed by the TEM analysis. The DLS analysis indicated that the multilayer chitosan microcapsules were pH and ionic strength dual-responsive. Due to the biocompatibility of the single component chitosan used, the multilayer chitosan microcapsules are expected to be used in the controlled release of drugs.     

Si掺杂对TiO2空心微球微结构和光催化性能的影响

以葡萄糖、氟钛酸铵和氟硅酸铵为原料,采用一锅水热合成法在葡萄糖聚合形成的胶体碳球表面原位生成了含有Ti/Si物种的前驱物实心微球,再经高温焙烧脱除碳球模板,制得Si掺杂的TiO2空心微球.应用高分辨透射电镜、X射线衍射、X射线光电子能谱和N2吸附-脱附等手段对样品进行了表征.结果表明,Si进入到TiO2的晶格,形成的S...     

Pickering乳滴模板法制备超粒子结构有机/无机杂化微球

Pickering乳滴模板法制备有机/无机杂化的核壳微球越来越引起人们的关注,主要因为该方法制备出的微球具有以无机粒子为壳层的超粒子结构(supracolloidal structure),能够赋予微球独特的功能.胶体粒子在乳滴表面自组装形成有序的球面胶体壳,得到稳定Pickering乳液,固定乳滴表面的胶体粒子来制备核壳结构的微球或者以胶体粒子为壳层的微胶囊(colloidosome).本文综述了我们课题组以Pickering乳滴模板法制备超粒子结构有机/无机杂化微胶囊包括实心微球方面的工作.我们选择具有不同性能、种类的胶体粒子以及具有不同性质和功能的核材料,采用Pickering乳滴模板法,对吸附在乳滴表面的胶体粒子用不同的固定方法制备具有不同结构和性能的微球和微胶囊,利用基于多重Pickering乳液的聚合技术制备双纳米复合的超粒子结构多核聚合物微球.     

Preparation of monodisperse,reactive hydrogel microspheres and their amphoterization

Monodisperse, reactive hydrogel microspheres were prepared by precipitation polymerization ofp-nitrophenyl acrylate (NPA) with acrylamide, methacrylic acid, and methylenebisacrylamide in ethanol. The size of microspheres was controlled by the monomer ratio. Some fraction of reactive ester decomposed during the polymerization. The reactive hydrogel microspheres were converted to amphoteric ones by the reaction of NPA units with diamine. The isoelectric point of the amphoteric microspheres was around 4.0, but it was different from the pH at which the microspheres have the minimum size or the most shrunken state. This was attributed to the uneven distribution of induced amine groups.     

激光合作目标用玻璃微珠的研制

本文研究了玻璃及成珠工艺对激光合作目标特性的影响，并设计了特殊设备和工艺规程，在此基础上研制出高性能激光合作目标用的玻璃微珠     

磁性高分子微球Fe3O4／PMMA的制备与表征

以油酸作为表面活性剂,采用化学共沉淀法制备了具有良好晶型、分散性好的纳米四氧化三铁。以甲基丙烯酸甲酯（MMA）作为反应单体,DVB为交联剂,使用水溶性引发剂KPS,采用单体聚合法制备磁性高分子微球Fe30dPMMA,该磁性高分子微球具有明显的核壳结构,粒子尺寸约为500nm。     

Preparation of Poly (L-lactic Acid) Microsphere

Poly (L-lactic acid) (PLLA) microspheres were prepared by a solvent evaporation method based on an oil/water emulsion. The effect of the mass ratio of PLLA and poly(vinyl alcohol) (PVA) on the formation of the microspheres was discussed, and the influence of extraction speed of dichloromethane on the microsphere morphology was also studied. Moreover, the influences of the PLLA concentration and the volume ratio of water phase to dichloromethane phase were investigated. The results showed that stable microspheres can be obtained under the conditions that the mass ratio of PLLA to PVA is 20:1. Porous microspheres were obtained under faster evaporating speed of dichloromethane. The microsphere size increased with increasing PLLA concentration. The microsphere size also increased with the increase of the volume ratio of water phase to dichloromethane phase.     

单分散键合型含铕聚苯乙烯微球的制备与荧光传感性能

制备了一种可定性定量检测水溶液中三价铁离子的含铕聚苯乙烯微球, 分别用固体核磁碳谱(¹³C CP/MAS NMR)、 傅里叶变换红外光谱(FTIR)、 X射线光电子能谱(XPS)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 元素分析、 粒度分析和ζ电位分析等对其化学组成和结构形貌进行表征. 当铕配合物单体用量低于2.5%时, 可以得到稳定的单分散键合型含铕聚苯乙烯微球. 用紫外光激发时, 该含铕聚苯乙烯微球发射铕离子的特征红光. Fe³⁺能猝灭该微球的荧光, 酸根离子和其它金属离子对其干扰较少; 猝灭效率与Fe³⁺浓度在0~300 μmol/L浓度范围内均呈线性关系; 随着铕配合物单体用量的增加, 微球的荧光增强, 其在检测Fe³⁺的荧光时, 猝灭常数(K_SV)增加, 检测限(LOD)下降. 调节铕配合物单体的用量, 可获得热性能优异、 红光发射强度高且稳定性好的单分散聚苯乙烯荧光微球, 对Fe³⁺荧光检测显示出较高的选择性, 在生物检测和环境保护等领域具有较高的应用价值.