微乳液法合成白光LED NaLu(MO4)2:Eu3+/Eu3+,Tb3+(M=W, Mo)荧光粉

采用微乳液法制备NaLu(WO₄)_2-x(MoO₄)x:8%Eu³⁺(x=0, 0.5, 1.0, 1.5, 2.0)/y%Eu³⁺,5%Tb³⁺(y=1, 3, 5, 7, 9)系列荧光粉.通过X射线衍射(XRD)表征,所制样品的X射线衍射峰与标准卡片PDF#27-0729基本吻合,表明所制的样品为白钨矿结构,属于四方晶系.扫描电镜SEM显示制备的纳米粒子是梭子状的,粒径大约是110 nm.激发发射光谱显示,在Eu³⁺离子掺杂浓度为8%时,NaLu(WO₄)(MoO₄):Eu³⁺发光强度最大.NaLu(WO₄)_2-x(MoO)x :8%Eu³⁺(x=0, 0.5, 1.0, 1.5, 2.0)荧光粉在Mo/W比达到1:1(x=1)时发光强度最大,强烈的红光发射表明该材料可用于白光LED材料.该荧光粉在268、394和466 nm波长光激发下分别发出橙红色、黄色和淡黄色光,可以满足不同光色需要.NaLu(WO)(MoO):y%Eu³⁺,5%Tb³⁺(y=1, 3, 5, 7, 9)荧光粉,随着y值增大,从绿光区(x=0.278, y=0.514)进入白光区(x=0.356, y=0.373), (x=0.278, y=0.313),同时观察到Tb³⁺到Eu³⁺有效能量传递.     

光散射法研究丙烯酸十八酯和苯乙烯微乳液 共聚机理

在十六烷基溴化吡啶/叔丁醇/15%丙烯酸十八酯和苯乙烯/水体系的O/W微乳液中,使用动态光散射法,研究其中两种单体共聚反应的成核机理。结果表明,聚合过程中乳胶粒成核位置主要在增溶胶囊的单体微珠中,乳胶粒主要依靠单体微珠不断提供单体而长大。     

非水反相微乳中NaCl纳米粒子的制备

在乙醇/Brij 30/十六烷反相微乳中利用无水NaAc与HCl反应制备了水可溶性晶态NaCl纳米粒子,平均粒径为 60 nm.与在甲酰胺/AOT/正庚烷反相微乳中制备的粒径约为1 μm的NaCl粒子进行比较,表明在特定条件下,非水微乳可以作为合成水可溶性纳米粒子的有效介质.     

三组分体系相图教学实验——微乳的制备*

为了让三组分体系相图的教学紧跟学科发展前沿,设计了一个研究型综合性实验——微乳的制备。实验以油酸乙酯为油相、吐温-80和乙醇质量比为3∶1的混合体系为乳化剂相,蒸馏水为水相,采用水滴定和油滴定结合的方法绘制了拟三元相图。通过电导率法对微乳3种类型的转变点进行了初判,按照电导率实验结果制备了3种不同类型的微乳样品,并利用染色法、黏度法和光散射法对微乳的物理化学性状进行了表征。通过实验,可以使学生获得分散体系的前沿知识,有利于创新人才的培养。     

微乳法制备纳米Ru/NaY催化剂及其催化对苯二酚加氢

采用曲拉通X-100(Triton X-100)/正己醇/正庚烷/RuCl_3·3H_2O水溶液构成微乳液,以水合肼为还原剂,制备了纳米Ru颗粒,再破乳将其负载于NaY分子筛得到M-Ru/NaY催化剂.通过XRD、BET、XPS、SEM、TEM及DSC分析方法对催化剂进行了表征.表征结果表明,M-Ru/NaY催化剂具有金属钌平均粒径小,分布均匀,高度分散等优点.以对苯二酚加氢制1,4-环己二醇为探针反应,对微乳法和传统浸渍法制备的催化剂活性和选择性进行了比较,深入研究了催化剂用量,反应温度,氢气压力对对苯二酚加氢活性的影响及最佳反应时间的确定.实验结果表明,M-Ru/NaY催化剂在反应温度150℃,氢气压力4.0 MPa,m(M-Ru/NaY)∶m(对苯二酚)=0.2∶1,溶剂为异丙醇,此条件下反应30 min,对苯二酚转化率为100%,1,4-环己二醇的选择性高达92.6%.还考察了M-Ru/NaY催化剂的稳定性.最后,探讨了对苯二酚加氢反应路径.     

DPD Simulation on the Transformation and Stability of O/W and W/O Microemulsions

The dissipative particle dynamics simulation method is adopted to investigate the microemulsion systems prepared with surfactant (H1T1), oil (O) and water (W), which are expressed by coarse-grained models. Two topologies of O/W and W/O microemulsions are simulated with various oil and water ratios. Inverse W/O microemulsion transform to O/W microemulsion by decreasing the ratio of oil-water from 3:1 to 1:3. The stability of O/W and W/O microemulsion is controlled by shear rate, inorganic salt and the temperature, and the corresponding results are analyzed by the translucent three-dimensional structure, the mean interfacial tension and end-to-end distance of H1T1. The results show that W/O microemulsion is more stable than O/W microemulsion to resist higher inorganic salt concentration, shear rate and temperature. This investigation provides a powerful tool to predict the structure and the stability of various microemulsion systems, which is of great importance to developing new multifunctional microemulsions for multiple applications.     

PbI_2纳米超微粒的制备与表征

讨论了ＰｂＩ＿２超微粒的二种化学制备方法，并用紫外－可见光谱、光电子能谱、Ｘ光小角散射等手段对其进行了表征。     

甲基丙烯酸甲酯反相微乳液聚合研究

绘制了甲基丙烯酸甲酯（MMA）／丙烯酸（AA）／十二烷基硫酸钠（SDS）H2O拟三元相图，确定了不同类型微乳液区域；采用偶氮二异丁腈（AIBN）引发MMA／AA／SDS／H2O反相微乳液聚合，得到了具有明显孔穴结构的聚合物；研究了反相微乳液体系的聚合动力学，考察了AIBN用量、AA含量、SDS水溶液含量及反应温度对初期聚合速率（dC／dt）的影响，得到dC／dt∝[AIBN]^0.8[AA]^1.2[W]^0.7，聚合表观活化能为93．8kJ／mol，并提出了“微乳液双相聚合”的概念。     

四元共聚反应性微凝胶制备的研究

采用微乳液聚合工艺,用半连续加料法合成了以甲基丙烯酸(MAA)为功能单体、以二乙烯基苯(DVB)为交联剂的苯乙烯(St)/丙烯酸丁酯(BA)共聚微凝胶,考察了软硬单体配比、非离子和阴离子乳化剂配比和用量及MMA、DVB用量对共聚物乳液的粒径及其分布、粘度和成膜性能的影响.     

Formation of calcium phosphate mineral materialcontrolled by microemulsion

In order to prepare calcium phosphate-based material with nano-structure and bioactivity, natural lecithin and n-tetradecane were used as the amphipile and the oil phase respectively, along with the water phase, to form a microemulsion template. Phosphate mineralization was induced and controlled by the microemulsion. The products, characterized by scanning electronic microscopy, infrared spectroscopy and X-ray diffraction analysis, are composed of lecithin and hydroxyapatite, and possess the nano-structure of sticks, balls and three-dimensional nets connected by tubes. These results show that the microemulsion can be used to control calcium phosphate mineralization for the preparation of biomimetic mineral materials with various nano-structures.