物理精炼菜籽油的前处理——菜籽油的物理精炼研究(Ⅱ)

本课题采用正交试验方法,对脱胶添加剂和国产脱色白土的种类、用量及其他操作条件进行筛选试验研究,将试验结果对贵州产二级毛菜籽油进行前处理,经水蒸汽精炼后可以制得合符标准的外销色拉油。     

一种安全的IP网络模型的构建

本文介绍了网络安全的现状以及网络安全威胁的概念，从而提出了一种安全的IP网络模型。其主要由四大技术组件组成，既安全身份识别、安全传送、安全防御和安全监控，并对每个组件进行详细的分析，最后肯定了这种IP网络模型是安全的。     

DGPVT软件包的开发及应用

介绍了针对油藏流体及其注气体系的相态及物性的预测而开发的DGPVT软件包功能、模型及特点。基于实验数据对DGPVT软件包的预测准确性进行了检验,并与石油界知名的商用油气相态及物性计算软件包STATPACK进行了比较。     

转子流量计用于柴油消耗量测定的试验研究

本文对影响柴油用转子流量计测量精度的主要因素进行了试验研究。研究结果表明,柴没的粘度、密度以及测试温度不同,对测量精度将造成不可忽视的影响。根据流体力学的基本原理,利用试验优化方法提出的薄壁量孔校正方法,能够对柴油用转子流量计各标定值进行快速有效的校正。该方法具有较好的油品和温度适应性,其校正精度达2％。     

FRS-XRSA与SAXS研究硬弹性聚丙烯的结晶度、取向与超结构Ⅲ应变与回复

应用全倒易空间Ｘ 射线散射理论分析（ＦＲＳ ＸＲＳＡ）与ＳＡＸＳ研究了ＨＥＰＰ在应变（ε）与回复（Ｒ）过程中结晶、取向与超结构的变化．结果指出，ε可以诱发结晶，但当ε≥３０％后，结晶度（ＸＷＣ）趋于不变：ε可以导致晶粒破碎；ε与Ｒ对取向分布与平均取向基本上无影响，这符合片晶平行分离模型，而非叶簧弯曲模型；发现，在ε≤３０％时，层状片晶的分离为主要过程，而当ε＞３０％后，则分离的片晶会发生断层滑移；ε可以诱发微孔，类似地当ε＞２０％，微孔尺寸亦趋不变．从凝聚态结构阐明了ＨＥＰＰ在ε Ｒ过程中不同阶段的结构变化     

缬草根化学成分的研究

本文报道了湖南花坦县产的缬草根的化学成分，用气相色谱－色谱－计算机联用和波谱技术鉴定了缬草根中的４４个组分，其中乙酸里哪醇酯，２－蒈烯，马拶铃烯，瓦伦烯，香橙烯，愈创木烯，异尼醇，乙酸金合欢酯，邻苯二甲酸二异辛酯，６，１３－二甲基－十四烷酸和２－甲基十六烷酸甲酯等化合物是在缬草根中首次发现的，对缬草根中的氨基酸和微量元素也进行了测定。     

新型聚丙烯酸酯类柴油降凝剂分子模型的建立及验证

在前期工作得出的正构烷烃含量与浊点、冷滤点、凝点的定量关系模型基础上，选择柴油降凝剂的基团对柴油降凝剂分子结构进行了设计，得出了设计模型。结果表明，将含氮基团引入柴油降凝剂可以显著提高柴油降凝剂的性能。根据设计模型合成了一系列聚丙烯酸单酯和混合酯柴油降凝剂，并通过对柴油降凝剂的性能测试结果和自行设计的计算程序对设计模型进行了验证，结果表明，从柴油正构烷烃含量对柴油降凝剂的配比进行设计是可行的。     

Dynamic Interfacial Tension Behavior of Water/Oil Systems Containing In situ-Formed Surfactants

Time-dependent interfacial tension (IFT) has been investigated for an interfacially reactive immiscible system composed of model-acidified oil and alkaline water. The acidified oil was composed of either lauric acid or linoleic acid dissolved in n-dodecane. Drop volume tensiometry was employed to measure the interfacial tension between the two phases. In the case of lauric acid, the IFT value was found to decrease sharply with increasing alkali concentration, even at low drop formation times. In the case of linoleic acid, the IFT decrease with the drop formation time was more gradual, especially at low alkali concentration. The rate of formation of the interfacial area was also found to be dependent on alkali concentration.     

Feasibility of using solid sampling graphite furnace atomic absorption spectrometry for speciation analysis of volatile and non-volatile compounds of nickel and vanadium in crude oil

A method for the direct determination of volatile and non-volatile nickel and vanadium compounds in crude oil without previous treatment using direct solid sampling graphite furnace atomic absorption spectrometry is proposed. The crude oil samples were weighed directly onto solid sampling platforms using a microbalance and introduced into a transversely heated solid sampling graphite tube. In previous work of our group losses of volatile nickel and vanadium compounds have been detected, whereas other nickel and vanadium compounds were thermally stable up to 1300 and 1600 °C, respectively. In order to avoid this problem different chemical modifiers (conventional and permanent) have been investigated. With 400 μg of iridium as permanent modifier, the signal started to drop already after two atomization cycles, possibly because of an interaction of nickel (which is a catalyst poison) with iridium. Twenty micrograms of palladium applied in each determination was found to be optimum for both elements. The palladium was deposited on the platform and submitted to a drying step at 150 °C for 75 s. After that the sample was added onto the platform and submitted to the furnace program. The influence of sample mass on the linearity of the response and on potential measurement errors was also investigated using four samples with different nickel content. For the sample with the lowest nickel concentration the relationship between mass and integrated absorbance was found to be non-linear when a high sample mass was introduced. It was suspected that the modifier had not covered the entire platform surface, which resulted in analyte losses. This problem could be avoided by using 40 μL of 0.5 g L⁻¹ Pd with 0.05% Triton X-100. Calibration curves were established with and without modifier, with aqueous standards, oil-in-water emulsions and the certified reference material NIST SRM 1634c (trace metals in residual fuel oil). The sensitivity for aqueous standards and emulsions was close to that for SRM 1634c, making possible the use of aqueous standards for calibration. The limits of detection and quantification obtained for nickel and vanadium under this condition were found to be 0.02 and 0.06 μg g⁻¹, respectively, for both elements, based on 10 mg of sample. Nickel and vanadium were determined in the samples with (total Ni and V) and without the use of Pd (thermally stable compounds), and the concentration of volatile compounds was calculated by difference. The results were compared with those obtained by high-resolution continuum source graphite furnace atomic absorption spectrometry by emulsion technique; no significant differences were found for total Ni and V at the 95% confidence level according to a Student's t-test.     

Essential Oil of Arischrada korolkowii from the Chatkal Mountains of Uzbekistan

The herbal parts of Arischrada korolkowii (Regel et Schmalh.) Pobed. (Lamiaceae) growing in Uzbekistan were hydrodistillated to yield 1.1% of essential oil. The essential oil was analyzed by GC/MS. Eighty eight compounds were characterized representing 98% of the essential oil with 1,8-cineole (29.3%), camphor (9.8%), -caryophyllene (8.5%), bornyl acetate (7.7%), caryophyllene oxide (7.2%), and borneol (5.6%) as the main constituents.