New breathable and waterproof coatings for textiles: effect of an aliphatic polyurethane on the formation of PEEK-WC porous membranes

PEEK-WC is an amorphous polyetheretherketone with high chemical stability, excellent thermal resistance and significant solubility in various solvents. It has been used to prepare flat membranes by the phase inversion technique. The water vapour permeability through a porous PEEK-WC film was 1350 g/m² day at 26 °C and its liquid entry pressure (LEP) of water equivalent to a column of 2.0 m. These values were remarkably improved by addition of an aliphatic ether polyurethane (PU) into the PEEK-WC/DMF dopes: the water vapour flux was increased up to 2000 g/m² day and the LEP was equivalent to 12.5 m. This improvement is correlated to the different structure of the membranes: a spongy, porous and almost symmetric structure for the PEEK-WC/PU membranes, and an asymmetric structure with fingers for PEEK-WC membrane. The presence of PU influences also the mechanical properties of the blend membranes. The role of the PU on the resulting membrane morphology is rationalised on the basis of the mechanism of phase separation.     

聚苯胺尿酸酶电极性能的研究

依据pH对聚苯胺尿酸酶电极最大响应电流的影响, logim～pH图表明尿酸酶电极的催化活性只与其电离基团的碱性形式有关. 扫描电镜的结果表明, 聚苯胺尿酸酶电极的稳定性与其制备方法有关. 电化学法固定的尿酸酶电极具有高的稳定性.     

Effect of evaporation temperature on the formation of particulate membranes from crystalline polymers by dry-cast process

The membrane formation of crystalline poly(ethylene-co-vinyl alcohol) (EVAL), poly(vinylidene fluoride) (PVDF), and polyamide (Nylon-66) membranes prepared by dry-cast process was studied. Membrane morphologies from crystalline polymers were found to be strongly dependent on the evaporation temperature. At low temperatures, all the casting solution evaporated into a particulate morphology that was governed by the polymer crystallization mechanism. The rise in the evaporation temperature changed EVAL membrane structure from a particulate to a dense morphology. However, as the temperature increased PVDF and Nylon-66 membranes still exhibited particulate morphologies. The membrane structures obtained were discussed in terms of the characteristics of polymer crystallization in the casting solution theoretically. At elevated temperatures the crystallization was restricted for the EVAL membrane because the increase rate in the polymer concentration was fast relative to the time necessary for growth of nuclei. Nonetheless, the time available for PVDF and Nylon-66 with stronger crystalline properties was large enough to form the crystallization-controlled particulate structure that differed in particle size only. In addition, particles in the PVDF membrane were driven together to disappear the boundary, but those in the Nylon-66 membrane exhibited features of linear grain boundary. The difference in particle morphology was attributed to the Nylon-66 with the most strongly crystalline property. Therefore, the kinetic difference in the crystallization rate of the polymer solution play an important role in dominating the membrane structure by dry-cast process.     

Anti-solvent assisted treatment for improved morphology and efficiency of lead acetate derived perovskite solar cells

An efficient solution-processable route employing Pb(Ac)₂ as lead source and anti-solvent treatment to achieve fully covered and homogenous perovskite films is reported.     

Production of submicron-sized multihollow polymer particles by alkali/cooling method

Submicron-sized styrene-methacrylic acid copolymer particles, which were produced by emulsion copolymerization, were changed to those having multihollow structure by treating stepwise the emulsion as follows. First alkali treatment was carried out at higher temperature than the glass transition temperature and subsequently the emulsion was cooled by keeping it at room temperature. This was named alkali/cooling method. The effects of methacrylic acid content, pH, time and temperature in the alkali treatment on the formation of multihollow structure were clarified.Part CLV of the series Studies on suspension and emulsion     

压缩X因子导数光谱法测定痕量锗

本采用压缩Ｘ因子导数光谱技术实现了宽峰体系灵敏度的大幅度提高，提出了测定痕量锗的方法。在０．７２ｍｏｌ／ＬＨ２ＳＯ４和３．０ｍｏｌ／ＬＨ３ＰＯ４的混酸介质中，锗－水杨基荧光酮－ＯＰ三元显色体系的压缩Ｘ因子四阶导数光谱摩尔响应系数达１．８９×１０＾６Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，灵敏度比常规光度法高１２．４倍；最低检测出限为０．０００３３ｍｇ／Ｌ，比常规光谱法低４倍；选择性也进一步提高，绝大多数离     

On the morphology of polystyrene fractions,obtained by a multistep procedure from a radically polymerized sample

Summary A polystyrene sample obtained by free radical polymerization has been fractionated by preparative scale GPC and the structure and morphology of the fractions have been studied by¹³C-NMR spectroscopy, DSC and X-ray measurements. No changes in morphology in the course of fractionation have been obeyed. A distribution of syndiotacticity within the molecular weight distribution does not exist.

---

Zusammenfassung Eine Polystyrolprobe, die durch radikalische Polymerisation hergestellt wurde, wurde mit Hilfe der präparativen Gelpermeationschromatographie fraktioniert; die Struktur und Morphologie der Fraktionen wurde mit¹³C-NMR-Spektroskopie, DSC und Röntgenbeugung untersucht. Im Verlauf der Fraktionierung traten keine Änderungen der Morphologie der Fraktionen auf. Innerhalb der Molekulargewichtsverteilung existiert keine Verteilung der Syndiotaktizität.

---

List of abbrevations and symbols AIBN a, a-Azo-bis-(iso-butyronitrile) - D Dispersity, M _w /M _n - DSC Differential scanning calorimetry - EF Efficiency of fractionation - GPC Gel permeation chromatography - m mass of the fraction - M mass of the fractionated polymer sample - MWD Molecular weight distribution - P _r content of racemic dyads - PS Polystyrene - THF Tetrahydrofuran - U D-1 - U _ss U of the starting sample - U _f U of the fraction Auszug aus der Dissertation von U.-D. Standt: Zur Morphologie von Polystyrol, TU Braunschweig 1981.     

Melt-crystallization, glass transition and morphology of a (R)-3-hydroxybutyrate pentamer

The melt-crystallization of an oligo[(R)-3-hydroxybutyrate] with five repeating units has been analyzed using standard and temperature-modulated calorimetry, optical microscopy, and atomic force microscopy. Specimens of different crystallinity and supermolecular structure were generated by variation of the rate of cooling of a quiescent melt, or by variation of the temperature of isothermal crystallization. Completely amorphous samples can be obtained by cooling of the melt at a rate of 40 K min⁻¹, or faster, to a temperature lower than the glass transition. The crystallinity depends on the crystallization temperature. The maximum enthalpy-based crystallinity of about 40-45% is obtained by crystallization at temperatures lower than the temperature of the maximum crystallization rate, which is between 310 and 320 K. Analysis of the apparent heat capacity in metastable structural equilibrium reveals reversible melting at temperatures between 320 and 370 K by observation of an excess heat capacity above the level of the vibrational heat capacity, i.e., in the temperature range of irreversible reorganization and melting. The reversible melting is discussed in the context of coupling of the crystalline and amorphous phases, and compared to earlier studies on oligoethylene and oligo(oxyethylene). The presence of crystals causes formation of a rigid amorphous fraction of about 30% at a crystallinity of 40%. Optical and atomic force microscopy reveal spherulitic crystallization. At relatively high crystallization temperature, and in the early stage of the crystallization process, dendrites are observed which finally yield spherulites of decreased perfection. Larger spherulites of higher perfection grow at relatively low crystallization temperature, as deduced from the appearance of the Maltese cross, and the regularity of banding. The band spacing is less than 5 μm, as is accurately determined by atomic force microscopy. The temperature dependence of the spherulitic growth rate is in accord with the calorimetric analysis of the crystallization rate.     

氧化锌微晶的制备和形貌控制

本文在溶液体系中合成了多种形貌的氧化锌(ZnO)微晶。所得花状、雪花状、棒状、多刺球状和棱柱状氧化锌微晶用粉末X射线衍射(XRD)和扫描电镜(SEM)进行了鉴定和表征,考察了反应条件如溶剂、温度及pH值对ZnO微粒尺寸和形貌的影响,初步探讨了不同形貌ZnO微粒的生长机理。该文对制备形貌可控的氧化物具有一定的指导意义。     

TiO2纳米膜表面结构形态特征

采用反胶束法制备TiO2纳米溶胶,用浸渍提拉法在不同的条件下制备了三种TiO2多孔纳米薄膜,并利用AFM、SEM、XRD等方法对膜表面结构物理化学特性进行表征.结果表明三种膜基本上由粒径约为59 nm的纳米粒子以不同的方式堆积而成,溶胶刚生成时浸提一次,干燥、焙烧得到膜上纳米粒子分布均匀,所生成的二次粒子粒径最小,二次粒子形成的二次表面粗糙度最小,浸提10次得到膜上纳米粒子间存在较丰富缝隙结构,二次粒子粒径及其形成的表面粗糙度较大,而溶胶制备好陈化6 h后浸提得到的膜上二次粒子粒径最大,表面粗糙度最高.由分形理论估算得到三种膜的分形维数分别是2.22、2.20和2.27. XRD测试表明,膜上TiO2为锐钛矿晶相.这些结果表明,采用不同制备步骤得到的膜,其表面结构形态存在较大的差异.