Sorption of C6 Alkanes in Aluminophosphate Molecular Sieve, AlPO4-5

Sorption of C₆ alkanes viz.,n-hexane, 2-methylpentane, 2,2-dimethyl butane, 2,3-dimethyl butane, cyclohexane and methyl cyclopentane in AlPO₄-5 is studied and sorption capacity and thermodynamic parameters (H⁰, H, G, S and S_a) at various sorption coverage for these sorbates have been estimated. The initial heat of sorption (H⁰) is found to increase with the degree of branching in the alkane chain. The sorbate-sorbate interactions are found to be more prominent during the sorption of doubly branched alkanes and cyclic alkanes and a higher sorption capacity has been observed for cyclic alkanes. Based on the results obtained, a packing model has been proposed for various C₆ alkanes inside the AlPO₄-5 channel.     

Stereoselective synthesis of (±)-indolizidines 167B and 209D and theirtrans-isomers based on the reductive allylboration of pyridine

A general method for the synthesis of 5-substituted indolizidines based on intramolecular cyclization oftrans- andcis-2-allyl-6-R-1,2,3,6-tetrahydropyridines, obtained from pyridine and triallylborane, has been elaborated. The closure of the five-membered ring is carried out by hydroboration-oxidation followed by cyclization of the resulting δ-amino alcohols in the presence of the Ph₃P−CBr₄−Et₃N system. (Pr₂BH)₂ and Pr₃B are used as the hydroborating reagents, and H₂O₂ in an acid medium is used for the oxidation of 2-[3-(dipropylboryl]-Δ²-piperideines formed. This method has been used for the synthesis of two natural alkaloids: indolizidine 209D (cis-5-hexylindolizidine) and itstrans-isomer were prepared fromcis- andtrans-2-allyl-6-hexyl-1,2,3,6-tetrahydropiridine, respectively; indolizidine 167B andtrans-5-propylindolizidine were synthesized fromcis- andtrans-2,6-diallyl-1,2,3,6-tetra-hydropyridine, respectively. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 971–979, May, 1998.     

Synthesis of spherical microcapsules by photopolymerization in aerosols

 The preparation of polymer microcapsules of well defined size in the range of 10–50 μm with different shell thickness to core diameter ratios is described. An aerosol of monodisperse droplets of a homogeneous ternary liquid system which contained a hydrophobic component and a hydrophilic component dissolved in a high-volatile mutual solvent, was produced by dispersing with a vibrating-orifice aerosol generator. After the evaporation of the solvent in a nitrogen atmosphere the particles demix and form a two-phase droplet of core-shell type. These droplets were illuminated with UV light and polymerized to highly monodisperse microcapsules with a solid polymer shell and a liquid core. The properties of the resulting particles (size, size distribution, shell thickness, shape and surface characteristics) were investigated by scanning electron microscopy, Raman spectroscopy on single optically levitated particles, and confocal Raman micro spectroscopy. The microcapsules were highly monodisperse and have spherical shape. Received: 24 July 1996 Accepted: 29 August 1996     

Solvent effect in cis-1,4 polymerization of 1,3-butadiene by a catalyst based on neodymium

In this work a laboratory polymerization scale process was studied for the production of polybutadiene with high content of cis-1,4 repeating units. A Ziegler-Natta catalytic system based on neodymium versatate (catalyst), diisobutylaluminium hydride (cocatalyst) and tert-butyl chloride (chlorinating agent) was used. The influence of solvent nature (pure grade) and possible contaminants (electron donors) in a recovered solvent from a butadiene-styrene anionic polymerization industrial plant on the stereoselectivity and catalytic activity, molecular weight and molecular weight distribution of the resultant polybutadienes was studied. The polymers were characterized by infrared spectroscopy and size exclusion chromatography. Polybutadienes with cis-1,4 units content in the range of 99-98% were produced. The polymers weight-average molecular weight, , varied from 2.23 × 10⁵ to 4.47 × 10⁵ and the molecular weight distribution, MWD, from 3.1 to 5.1.     

Application of Cyclodextrins to the Extraction of Antioxidant Compounds from Olive Oil

Olive oil contains powerful antioxidant compounds which impart stability, contribute to various properties of it, and are valuable from the nutritional point of view. Their extraction with as mild conditions as possible led to its investigation using cyclodextrins as a tool. The inclusion ability of α-, β-, and γ-CD was estimated, and it has been demonstrated that the small cavity of α-CD as well as the wide one of γ-CD could enclose less effectively the antioxidant compounds of olive oil than the intermediate in shape cavity of β-CD. The highest yields of antioxidant compounds were achieved when olive oil was mixed with a 2%aqueous solution of β-CD and the resulting precipitate was treated with ethyl alcohol.__________Published in Khimiya Prirodnykh Soedinenii, No. 1, pp. 18–21, January–February, 2005.     

Racemization of chiral amino alcohols III: Effect of Mg or Ca addition on the activity and stability of the Co/γ-Al2O3 catalyst

The racemization of R-(-)-2-amino-1-butanol in a reaction using Co/γ-Al₂O₃ catalysts and catalysts modified by Mg or Ca was investigated in this paper. Complete racemization was achieved with a yield of over 83% at using the Mg modified Co/γ-Al₂O₃ catalyst under optimized reaction conditions of 170°C and 2.5 MPa of H₂. The catalysts were thoroughly characterized by XRD, XPS, TPR, SEM and TEM. The addition of Mg and Ca may be advantageous for dispersing and stabilizing the active species of the Co/γ-Al₂O₃ catalyst, protecting from sintering, significantly improving its catalytic activity and stability.     

Synthesis of arylidene derivatives of N-unsubstituted pyrrolin-2-ones

5-Alkyl(aryl)-3-arylidene-3H-pyrrolin-2-ones were synthesized by ammonolysis of their O-heteroanalogs or by the reactions of 5-alkyl(aryl)-3H-pyrrolin-2-ones with aromatic aldehydes. The structures of the compounds obtained were confirmed by ¹H NMR spectra.     

Synthesis of a cyclic dinuclear organotin carboxylate via simultaneous debenzylation and decarbonylation reactions: X-ray crystal structure of [(PhCH2)2{O2CC6H4{N(H)N(C6H3-4(O)-5-O)}-o}Sn]2

The complex, [(PhCH₂)₂{O₂CC₆H₄{N(H)N(C₆H₃-4(O)-5-O)}-o}Sn]₂ (1), is obtained as the exclusive reaction product from the reaction of sodium 2-[(E)-2-(3-formyl-4-hydroxyphenyl)-1-diazenyl]benzoate and (PhCH₂)₃SnCl. The reaction possibly proceeds via Dakin type rearrangements where arylazosalicylaldehyde is oxidized to arylazocatechol, followed by facile Sn-C bond cleavage. Complete assignments were achieved by ¹H, ¹³C, 2D ¹H-¹¹⁹Sn HMQC (¹¹⁹Sn chemical shift), 1D gs ¹H-¹⁵N HMQC (¹J(¹⁵N, ¹H) coupling constant) NMR and ESI-MS. The crystal structure of compound 1 as determined by X-ray diffraction analyses shows a cyclic centrosymmetric dinuclear moiety linked into extended chains by pairs of long Sn?O contacts of approximately 3.2 Å. Two polymorphs were identified and their structures differ primarily in the packing arrangement afforded by the benzyl groups. In one polymorph, when viewed along the Sn?Sn vector, the benzyl groups at each Sn-atom are oriented to form an S-shape, while they form a U-shape in the second polymorph.     

Nonideal mixing of 16-(9-anthroyloxy) palmitic acid and fatty acid in monolayer

The surface pressure-molecular area curve of the mixed monolayer of 16-(9-anthroyloxy) palmitic acid (16AP) and fatty acid (palmitic or stearic acids) showed various kink points which indicated the phase transitions of the monolayer. On the basis of the surface phase rule, the phase diagrams of the mixed monolayer were elucidated. The bifunctional molecule, 16AP, takes two orientations in a monolayer state, that is, horizontal and vertical ones. Horizontally oriented 16AP and vertically oriented fatty acid form a mixed monolayer but this exhibits deviation from the ideal mixing, which was interpreted in terms of the surface regular solution theory. On the other hand, the 16AP molecule in the vertical state was found to be immiscible with the fatty acid molecule in a monolayer de spite both molecules being vertical to the surface and parallel to each other. This was caused by the participation of the 9-anthroyloxy moiety of 16AP in the interaction of 16AP and fatty acid in the hydrophobic region of the monolayer.     

Reaktionen von Tetraphosphortrichalkogeniden mit Alkyliodiden

Reactions of Tetraphosphorus Trichalcogenides with Alkyl Iodides Reactions of alkyl iodides RI (R = CHI₂, CH₂I or tert-Butyl) with P₄E₃ (E = S or Se) under the influence of light resulted in cleavage of the basal P₃ ring. β-P₄E₃(I)R was formed initially, then it rearranged to the more stable α-P₄E₃(I)R structure. ³¹P NMR data of these products were measured and discussed, along with ⁷⁷Se data for α- and β-P₄⁷⁷SeSe₂(I)CHI₂. On reaction of P₄S₃ with tert-butyl iodide in CS₂ or with sec-butyl iodide or iso-propyl iodide in dioxane, the new type of compounds P₅S₂R was observed. In this a sulfur bridge of P₄S₃ is replaced by a P? R group. ³¹P-NMR data for these compounds are reported.