Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007     

Organometallic chemistry related to applications for microelectronics in Japan

This is meant to be a brief overview of the developments of research activities in Japan on organometallic compounds related to their use in electronic and optoelectronic devices. The importance of organometallic compounds in the deposition of metal and semiconductor films for the fabrication of many electronic and opto-electronic devices cannot be exaggerated. Their scope has now extended to thin-film electronic ceramics and high-temperature oxide superconductors. A variety of organometallic compounds have been used as source materials in many types of processing procedures, such as metal–organic chemical vapor deposition (MOCVD), metalorganic vapor-phase epitaxy (MOVPE), metal–organic molecular-beam epitaxy (MOMBE), etc. Deposited materials include silicon, Group III–V and II–VI compound semiconductors, metals, superconducting oxides and other inorganic materials. Organometallic compounds are utilized as such in many electronic and optoelectronic devices; examples are conducting and semiconducting materials, photovoltaic, photochromic, electrochromic and nonlinear optical materials. This review consists of two parts: (I) research related to the fabrication of semiconductor, metal and inorganic materials; and (II) research related to the direct use of organometallic materials and basic fundamental research.     

On the phase space approach to complexity

We elaborate in some detail on a new phase space approach to complexity, due to Y.-C. Zhang. We show in particular that the connection between maximal complexity and power law noise or correlations can be derived from a simple variational principle. For a 1D signal we find 1/f noise, in accordance with Zhang.     

Cyclic reduction and FACR methods for piecewise hermite bicubic orthogonal spline collocation

Cyclic reduction and Fourier analysis-cyclic reduction (FACR) methods are presented for the solution of the linear systems which arise when orthogonal spline collocation with piecewise Hermite bicubics is applied to boundary value problems for certain separable partial differential equations on a rectangle. On anN×N uniform partition, the cyclic reduction and Fourier analysis-cyclic reduction methods requireO(N ²log₂ N) andO(N ²log₂log₂ N) arithmetic operations, respectively.     

Inhibition of the reduction of Cr(VI) at the magnetite–water interface by calcium carbonate coatings

The effect of calcium carbonate coatings on the reduction of aqueous chromate on the magnetite(1 1 1) surface has been investigated using a combination of synchrotron based X-ray photoemission spectroscopy (PES) and X-ray absorption near edge structure (XANES) spectroscopy, along with laboratory-based powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). CaCO₃ coatings (dominantly calcite with minor quantities of aragonite and vaterite) of thicknesses ranging from 10 Å to 20 m were grown on magnetite(1 1 1) surfaces by exposure to supersaturated aqueous solutions followed by evaporation of the solution—a process that mimics pore-water evaporation in vadose zones leading to the formation of caliche and calcium carbonate coatings on mineral grains. Coating thicknesses were determined from attenuation of the Fe 2p photoemission signal by the carbonate coating. For coatings less than 15 Å thick, Cr 2p photoemission and Cr L_II, L_III-edge XANES spectra show that chromate is reduced by the underlying magnetite surface; however, as the minimum coating thickness increases beyond 15 Å, the magnetite surface becomes passivated and further chromate reduction ceases. Our findings suggest that carbonate coatings on natural magnetite grains can significantly reduce or eliminate their ability to reduce Cr(VI), which is a toxic and highly mobile environmental contaminant.     

Nanometric Antimony Powder Synthesis by Activated Alkaline Hydride Reduction of Antimony Pentachloride

A novel chemical reduction method using an activated alkaline hydride (LiH or NaH-t-BuONa) in tetrahydrofuran solvent has been applied to antimony salt reduction. X-ray diffraction and transmission electron microscopy studies have been carried out to characterize the morphology and structure of the materials. Alkali hydride nature influence has been proved. In both cases the process allows to prepare antimony particles in nanometer range from few nanometers to about 20nm which could be used as anodic materials for lithium–ion batteries. With lithium hydride well-crystallized particles inclined to agglomeration were observed whereas finely dispersed amorphous particles were pointing out after activated sodium hydride reduction.     

Roughness reduction in submicron waveguides by low-molecular weight development

Roughness reduction of a submicron waveguide profile in chemically amplified negative resist is here performed by proper selection of an alkali-based developer, taking into account that its smaller molecules lead to smoother resist surface by altering the developing mechanism of aggregate extraction performed with standard quaternary ammonium hydroxide. Roughness is then analyzed by means of classical Atomic Force Microscope inspection; furthermore, a non-invasive line edge roughness analysis approach based on top-down scanning electron microscope acquisition gives comparable results, in terms of standard deviation and molecular aggregate periodicity.     

Optical bistability of planar metal/dielectric nonlinear nanostructures

We study theoretically a nonlinear response of the planar metal/dielectric nanostructures constituted from periodical array of ultra thin silver layers and the layers of Kerr-like nonlinear dielectric. We predict hysteresis-type dependences of the components of the tensor of effective dielectric permittivity on the field intensity allowing the change in material transmission properties from transparent to opaque and back at extremely low intensities of the light. It makes possible to control the light by light in all-optical nanoscale devices and circuits.     

Catalysis by Ir(III), Rh(III) and Pd(II) metal ions in the oxidation of organic compounds with H2O2

Catalytic activities of three transition metals, as iridium (III) chloride, rhodium (III) chloride and palladium (II) chloride, were compared in the oxidation of six aromatic aldehydes (benzaldehyde, p‐chloro benzaldehyde, p‐nitro benzaldehyde, m‐nitro benzaldehyde, p‐methoxy benzaldehyde and cinnamaldehyde), two hydrocarbons (viz. (anthracene and phenanthrene)) and one aromatic and one cyclic alcohol (cyclohexanol and benzyl alcohol) by 50% H₂O₂. The presence of traces (substrate: catalyst ratio equal to 1:62500 to 1:1961) of the chlorides of iridium(III), rhodium(III) and palladium(II) catalyze these oxidations, resulting in good to excellent yields. It was observed that in most of the cases palladium(II) chloride is the most efficient catalyst. Conditions for the highest and most economical yields were obtained. Deviation from the optimum conditions decreases the yields. Oxidation in aromatic aldehydes is selective at the aldehydeic group only and other groups remain unaffected. This new, simple and economical method, which is environmentally safe, also requires less time. Reactive species of catalysts, existing in the reaction mixture are also discussed. Copyright © 2007 John Wiley & Sons, Ltd.