Photon interaction studies using 241Am γ-rays

We have carried out some photon interaction measurements using 59.54 keV γ-rays from a ²⁴¹Am source. These include γ attenuation studies as well as photoelectric absorption studies in various samples. The attenuation studies have been made using leaf and wood samples, samples like sand, sugar etc., which contain particles of varying sizes as well as pellets and aqueous solutions of rare earth compounds. In the case of the leaf and wood samples, we have used the γ-ray attenuation technique for the determination of the water content in fresh and dried samples. The variation of the attenuation coefficient with particle size has been investigated for sand and sugar samples. The attenuation studies as well as the photoelectric studies in the case of rare earth elements have been carried out on samples containing such elements whose K-absorption edge energies lie below and close to the γ-energy used. Suitable compounds of the rare earth elements have been chosen as mixture absorbers in these investigations. A narrow beam good geometry set-up was used for the attenuation measurements. A well-shielded scattering geometry was used for the photoelectric measurements. The mixture rule was invoked to extract the values of the mass attenuation coefficients for the elements from those of the corresponding compounds. The results are consistent with theoretical values derived from the XCOM package.     

韧性金属裂纹尖端损伤区内应变场测量——数字散斑相关法应用

本文用数字散斑相关方法测量了五种不同幂硬化指数韧性金属材料(铝和铜),双边裂纹尖端细观区域内应变场.对所得结果用韧性损伤模型进行了分析.在此法中以金属自然表面结构为散斑场,不同加载状态的散斑场进行比较,得到相对变形与应变.图象之间相关性 C 是变形参数或是位移及其导数的泛函.使其相关性 C 取最大值的试凑变形即为其真实变形场.这一方法在细观测量中应用得到满意的结果.     

切削刀具倒棱刃口挤压力的理论计算

根据试验观察．揭出了刀具刃口带负倒棱时的切削模型。在此模型中,刀具刃口 存在一个“金属死区”。以新模型为基础．采用能量法,对高温、高应变率下刀具刃 口的挤压力进行了理论计算。所做工作的特点是：１）在材料变形分析中计入了挤压 层金属绕过刀具刃口时的过剩变形;２）进行有关材料变形与物理特性的计算时,考 虑了温度与应变率的影响。利用新研制的压电式切削测力仪进行验证试验,其结果表 明,理论计算值与实测数据较好一致。     

ICP-AES法测定录音带磁粉中七种痕量元素

用顺序ICP光谱仪测定录音带磁粉中Ca、Mg、Cr、Co、Mn、Zn和Ti等痕量元素。样品用H_2SO_4/H_3PO_4/HNO_3混合酸分解。利用仪器的扫描程序,确定被测元素的分析线及背景校正点波长,并求干扰元素校正系数。估计了七个元素的检出限。测得平均回收率在90～104%之间。     

原子外层空轨道相对最稳定顺序及周期性规则

本文提出原子外层空轨道相对稳定性可作为电子填充的粗略判据;给出由中性原子轨道能数据直接导出原子外层轨道相对最稳定顺序的图表及周期性规则;用以简明、清晰、合理地推引解释元素基组态和解释元素周期律。提出在中心势场模型基础上推引全部元素基组态的方法。     

Potentiometric studies on the complexation equilibria between some trivalent lanthanide metal ions and biologically active 2-hydroxy-1-naphthaldehyde thiosemicarbazone (HNATS)

Summary The chelation behaviour of some trivalent lanthanide and yttrium metal ion with biologically active 2-hydroxy-1-naphthaldehyde thiosemicarbazone (HNATS) has been investigated by potentiomotric measurements at 20±0.5°C in 75% (v/v) dioxane-water medium at various ionic strengths of sodium perchlorate. The method of Bjerrum and Calvin, as modified by Irving and Rossotti has been used to find out the values of (average number of ligand bound per metal ion) andpL (free ligand exponent). The formation constants of metal chelates have been computed on a PC-XT computer, using a program patterned after that of Sullivan et al. to give _n values using weighted least squares method. TheS _min values (S _min =²) have been calculated. The order of formation constants of chelates was found to be: La³⁺3+3+3+3+3+3+3+3+3+. The formation constants of the chelates formed have been correlated to size and ionization potentials of the metal ions.

---

Potentiometrische Untersuchungen der Komplexierungsgleichgewichte zwischen einigen trivalenten Metallionen und biologisch aktivem 2-Hydroxy-1-naphthaldehyd-thiosemicarbazon (HNATS)

Zusammenfassung Es wurde das Chelierungsverhalten einiger trivalenter Lanthanidenionen mit biologisch aktivem 2-Hydroxy-1-naphthaldehyd-thiosemicarbazon (HNATS) mittels potentiometrischer Messungen bei 20±0.5°C in 75% (v/v) Dioxan-Wasser bei verschiedener Ionenstärke an Natriumperchlorat untersucht. Die Methode nach Bjerrum und Calvin in der Modifikation nach Irving und Rossotti wurde zur Ermittlung der Werte (mittlere Anzahl an Liganden pro Metallion) undpL (Exponent an freiem Liganden) verwendet. Die Komplexbildungskonstanten wurden in Anlehnung an Sullivan et al. an einem PC-XT Computer errechnet. DieS _min-Werte (S _min=²) wurden ebenfalls bestimmt. Die Reihung der Chelatbildungskonstanten war: La³⁺3+3+3+3+3+3+3+3+3+. Die Bildungskonstanten sind mit der Größe und dem Ionisierungspotential der Metallionen zu korrelieren.

     

金属表面在反射方向产生光学二次谐波的研究(Ⅰ)

用Rudnick和Stern引入的唯象参数“a”和“b”来描述表面电流,本文推导了金属表面在反射方向产生的光学二次谐波的表达式.由此证明了:从谐波信号随入射光偏振态的变化可以直接得到关于参数“a”的信息.和过去的实验相比,这种方法能更加精确、可靠地测定“a”的数值.     

Synthesis and spectroscopic study of hexadecaalkyl-substituted rare-earth diphthalocyanines

New hexadecaalkyl-substituted diphthalocyanine complexes of lanthanides ^RPc₂Ln (R = Et, or Bu; Ln = Lu, Dy, or Eu) were synthesized by three methods: in solution in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene, in a melt of a mixture of the reagents, and under microwave irradiation. The first of the above-mentioned procedures has an advantage for the preparation of Dy and Eu diphthalocyanines, whereas the melt synthesis is a method of choice for the preparation of Lu complexes. The reaction time decreases in going from the first to the third method. The structures of the complexes were confirmed by mass spectrometry, NMR spectroscopy, and electronic absorption spectroscopy.     

纳米二氧化钛粒子分散性能的研究

以四氯化钛为原料，采用溶胶-凝胶法技术合成路线，获得了平均粒径为63nm的二氧化钛粉末。采用分散技术，不仅可以改善粒子的分散性能，而且对粒子的生长也起到一定的抑制作用。研究表明：(1)采用SDS作为分散剂时，其极性基团和非极性基团分别与水和纳米TiO2粒子相结合，从而阻隔了TiO2粒子的团聚，起到分散作用。(2)以稀土元素La作为分散剂，其独特的轨道结构，不仅扩大了能量吸收的范围，更重要的是它与TiO2形成的络合物，使其成为相对独立的小团体，而它本身很小的固溶度使其难于形成合金化组元，结果被释放出来，从而形成更小的纳米TiO2粒子，起到分散纳米TiO2粒子的作用，并同时抑制纳米TiO2粒子的生长。