MORPHOLOGY OF POLYURETHANES REVISITED BY COMPLEMENTARY AFM AND TEM

Cast, segmented polyetherurethanes with 30 and 50% hard-segment content (HSC), respectively, were studied by transmission electron microscopy (TEM) and atomic force microscopy (AFM). Multi-phase segregation was observed in both samples on two levels (micro and nano) of structural organization. Spherulites with a prominent radial structure, built of branched fibrils and globules, were captured on the micrometer level. The use of AFM enabled us to investigate the nanostructure in the polyurethanes studied here. In the sample with low (30%) HSC, nano-scale phase separation was observed by AFM in areas outside the crystalline aggregates. The morphology in these domains exhibited short, rodlike hard domains embedded in the matrix of the soft segments. The other sample (50% HSC) contained four identifiable morphological features. These included spherulites, globules, bundles of lamellae, and nanophase-separated, rodlike hard domains, embedded in the soft-segment matrix.

The globules did not have any internal structure visible by AFM down to the nanometer scale. We speculate that the globules form as a result of macro-phase segregation, due to incompatibility of the reactants, during synthesis and may thus be identified as pockets of free hard segments. The AFM phase imaging has been very useful to observe the bundles of lamellae and the nanoscale phase-separated structures, which were not captured by TEM, due to large differences in AFM phase signal contrast between the hard and the soft domains.     

Click‐chemistry of polymersomes on nanoporous polymeric surfaces

A facile click chemistry method of immobilizing surface‐functionalized polymer vesicles on casted polymeric PAN substrates is described. Microporous PAN membranes were subjected to hydrochloric acid hydrolysis to obtain surface carboxylates. The carboxylic groups were activated with EDC/NHS‐solution and were then reacted with propargylamine to introduce alkyne groups for CuAAC reactions. The alkyne functionality of the modified membrane surface was verified by reaction with an azide functional click dye both before and after the immobilization of azide‐functionalized ABA vesicles. The efficient postfunctionalization of the membrane with alkyne allowed quantitative coverage of the membrane surface with a polymersome monolayer, as confirmed by immobilization of polymerzomes loaded with a fluorescent dye. Polymersome monolayers immobilized on alkyne functionalized PAN‐membranes were characterized by cryo‐SEM and monolayers were confirmed by atom force microscopy. These methods opens up new avenues for preparing membrane based filtration and sensor technologies. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2032–2039     

Characterization of Compounds Acting on the α1A Adrenergic Receptor from Caulis spatholobi by Cell Membrane Chromatography with Possible Application for Treatment of Benign Prostatic Hyperplasia

Tamsulosin hydrochloride is a commonly used drug for treatment of benign prostatic hyperplasia which is a disease affecting elderly men. However, adverse reactions may occur when tamsulosin hydrochloride is used for long-term treatment. Caulis spatholobi is a traditional Chinese medicine with many pharmacological effects. In this study, a cell membrane chromatography column was combined with high-performance liquid chromatography–mass spectrometry to determine the active compounds acting on α1A adrenergic receptor from Caulis spatholobi. Formononetin was shown to be active on the α1A adrenergic receptor. This was investigated by a competitive binding assay that demonstrated that tamsulosin hydrochloride and formononetin employ the same binding sites. Thus, formononetin is a potential α1A adrenergic receptor antagonist for treating benign prostatic hyperplasia.     

Shear‐induced structuring kinetics in thermoplastic segmented polyurethanes monitored by rheological tools

Thermoplastic segmented polyurethanes (TPUs) are an important class of thermoplastic elastomers with a two‐phase microstructure arising from the thermodynamic incompatibility between hard (HSs) and soft segments. This microphase separation observed on cooling from a homogeneous state is often combined with the solidification of either or both types of segments. In this study, the structuring mechanism of two TPUs with HSs based on 4,4′‐diphenylmethane diisocyanate and 1,4‐butanediol was investigated from rheological measurements. Hence, in addition to the structuring temperature influence, the effect of an applied preshear flow in the melt polymer was analyzed, in particular. The results clearly show an enhancement of the solidification kinetics by the preshear. Indeed, the measured structuring time can be reduced by more than 1 decade. Rheo‐optical microscopy observations coupled with a shearing hot stage corroborated these results and showed the modification of the microstructure by the shear. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 190–201, 2010     

DYNAMIC CHARACTERISTICS IN INCOMPRESSIBLE HYPERELASTIC CYLINDRICAL MEMBRANES

In this paper, the dynamic characteristics are examined for a cylindrical membrane composed of a transversely isotropic incompressible hyperelastic material under an applied uniform radial constant pressure at its inner surface. A second-order nonlinear ordinary differential equation that approximately describes the radial oscillation of the inner surface of the membrane with respect to time is obtained. Some interesting conclusions are proposed for different materials, such as the neo-Hookean material, the Mooney-Rivlin material and the Rivlin-Saunders material. Firstly, the bifurcation conditions depending on the material parameters and the pressure loads are determined. Secondly, the conditions of periodic motion are presented in detail for membranes composed of different materials. Meanwhile, numerical simulations are also provided.     

Amphiphilic liquid‐crystalline 4‐miktoarm star copolymers with a siloxane junction leading to cylindrically nanostructured templates for a siloxane‐based nanodot array

Well‐defined A₃B‐, A₂B₂‐, and AB₃‐type 4‐miktoarm star copolymers (M_n = 10,500–16,200, M_w/M_n = 1.16–1.18) consisting of poly(ethylene oxide) (PEO) and polymethacrylate bearing an azobenzene mesogen (PMA(Az)) as the arms and cyclotetrasiloxane as the core unit were synthesized using a combined route composed of a thiol‐ene click reaction and atom transfer radical polymerization. Microphase‐separated structures of the star copolymers in thin films with a thickness of approximately 100 nm were investigated by GISAXS and TEM. The A₃B‐type star‐(PEO)₃[PMA(Az)]₁ copolymer formed a more highly ordered PEO cylinder array with perpendicular alignment in the PMA(Az) matrix than that of the corresponding linear‐type block copolymer. The center‐to‐center distance of the PEO cylinders and the cylinder diameter were 13 and 4 nm, respectively. The highly ordered star‐(PEO)₃[PMA(Az)]₁ thin film was directly transferred to a siloxane‐based nanodot array by oxygen reactive ion etching. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1175–1188     

本征值问题的修正傅里叶级数解

为了使本征值问题的求解更加完善,利用Iserles在2008年提出的修正傅里叶级数的三角基函数,使数学物理方法中的分离变量法成为一个全新的求解方法.利用这一方法对一类定解问题进行求解,最终得到了该问题的修正傅里叶级数解,验证了所提出的新方法的正确性.     

Using PDMS coated TFC-RO membranes for CO2/N2 gas separation: Experimental study,modeling and optimization

Thin film composite (TFC) reverse osmosis (RO) membranes are semipermeable membranes that are utilized in water purification or water desalination systems. Discarding these membranes after end-of-life leads to environmental problems. Reusing old TFC-RO membranes is one way to solve this problem. For this reason, in this study, used TFC-RO membranes were coated with polydimethylsiloxane (PDMS) for CO₂/N₂ gas separation application. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) was utilized to confirm the crosslinking of coated PDMS. The morphology of PDMS/TFC-RO membranes was characterized using scanning electron microscopy (SEM). The parameters that can affect performance of prepared membranes (N₂ permeance and CO₂/N₂ selectivity) are concentration of PDMS solution, coating time, solvent evaporation time and curing temperature and time. Given that the used membranes don't have uniform surfaces, the first step of this study was to investigate the effect of the above mentioned factors on virgin membranes using fractional factorial design (FFD) of experiments. The results obtained showed that PDMS concentration is the most significant factor that has a negative effect on N₂ permeance and positive effect on CO₂/N₂ selectivity. The reported CO₂/N₂ selectivity of PDMS membranes was 11–12, but this selectivity for prepared PDMS/TFC-RO membranes was in the range of 6.7–22.5. After determining optimum conditions, the gas separation performance of PDMS coated used TFC-RO membrane under these conditions was finally determined. The results showed that the used membranes had a better performance than virgin membranes.