精密气浮运动平台动态误差建模与分析

针对驱动合力偏离运动部件质心时,精密气浮运动平台运动部件会产生偏转振动,会带来运动和定位的动态误差,提出一种基于动力学分析的动态偏转误差评估方法.运用牛顿-欧拉法并引入欧拉四元数建立系统动力学方程,利用实验数据对静压气体轴承受力进行插值处理,有效解决了静压气体轴承受力非线性的问题,得到了更为精确的偏转误差曲线.以H形双边驱动XY运动平台为研究重点,分析其在不同受力情况下的偏转误差,结果表明：驱动不同步会引起运动平台较大幅度的偏转.该方法还可以推广到其他结构模型的运动平台.     

CPT系统拾取端能量注入式稳压电路的设计

针对非接触电能传输系统的输出电压控制方式,分析了影响CPT系统输出电压稳定性的因素,设计了一种能量注入式的拾取端稳压电路.该电路以输出电压为控制对象,以输出功率为控制目标,根据负载的需求实现系统输出电压的稳定,并且在能量状态转换的过程中基本实现了软开关.从能量的角度对该电路的输出电压和输出能量状态进行了分析,根据能量状态的改变提出了功率调节占空比的概念,并给出了相应的计算公式.实验结果证明了该方法的有效性.     

Study on the pre-chopper in CSNS LEBT

Physical designing of the pre-chopper in CSNS LEBT is carried out, which includes the deflecting voltage, the length and the width of the deflecting plates, and the gap between the deflecting plates. The most outstanding feature of the design is that both the gap and the width vary with the beam envelope size. So both the requried deflecting voltage and the loaded capacitance are lowered. In order to avoid destruction of the space charge neutralization by the pre-chopper in the whole LEBT, an electron-trapping electrode is arranged to confine the electrostatic field of the pre-chopper to the local area. To examine the reliability of the pre-chopping design in CSNS LEBT, a similar pre-chopping design in ADS RFQ LEBT is set up and an experiment on the pre-chopper is prepared. 3-dimensional simulations are carried out to determine the loaded capacitance and the applied voltage of the electron-trapping electrode.     

HL-2Aװ�ø������ȸ�ѹ��Դ����ϵͳ�������ʵ��

研制了HL-2A装置LHCD和ECRH系统使用的高压电源,其电源拓扑分别为晶闸管交流调压型和星点控制型高压电源,通过高压脉冲调制器给LHCD和ECRH系统供电,采用了波头补偿、前馈和反馈相结合的控制方法,弥补了电源拓扑本身固有的瞬态特性不足和发电机输出的不稳定性,使电源输出电压输出平顶的稳定度优于1%。介绍了高压电源的主回路结构,对高压电源的控制进行了论述,同时给出了实验结果。     

In-medium hadronization in the deconfined matter at RHIC and LHC

We study the mechanism and probability of in-medium hadronization in the deconfined medium produced in heavy-ion collisions at RHIC and LHC. We show the likelihood of color-neutral objects to be formed inside the partonic fireball and the probability of these states to escape the medium with reduced interaction strength and energy loss. We will suggest specific measurements that are sensitive to the early degrees of freedom and show predictions for these measurements at RHIC and the LHC.     

Runaway Electron Measurements in the EAST Tokamak

An experimental study of runaway electrons in the EAST tokamak has been performed by a recently developed multi‐channel hard x‐ray diagnostics based on NaI(TL) scintillator detectors. It is found that in the current quench phase, the inductive loop voltage plays an important role in the generation of runaway electrons. And the avalanche mechanism was the main mechanism for runaway electrons after the disruptions. The distribution and transportation of runaway electrons were also investigated by multi‐channel hard x‐ray diagnostics. It is also found that the intensity of runaway electrons emission in the core plasma was much higher than those in the downside of the cross‐section, while the emission intensity of runaway electrons in the core plasma was almost the same. Calculated shrinking coefficient of runaway electrons emission after the plasma disruption was about 26 m/s according to the experimental data (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Optimal design and analysis of a high-speed, low-voltage polymer Mach-Zehnder interferometer electro-optic switch

Detailed model, analysis and design technique are presented for simulating a high-speed polymer Mach-Zehnder interferometer (MZI) electro-optic switch with push-pull dual driving electrodes and rib waveguides. The novel formulas of the time-domain response are derived. Thorough optimization and simulation for the designed device are performed. The total length of the basic function unit of the switch is about 5049 μm, the push-pull switching voltage is 2.23 V, the switching time is 18.1 ps, and the insertion loss and crosstalk are less than 2.64 and −30 dB, respectively, within the range of the operation wavelength from 1534 to 1566 nm. These results are in good agreement with those obtained from the beam propagation method (BPM).     

Complex geometrical optics of Kerr type nonlinear media

The paper generalizes paraxial complex geometrical optics (PCGO) for Gaussian beam (GB) propagation in nonlinear media of Kerr type. Ordinary differential equations for the beam amplitude and for complex curvature of the wave front are derived, which describe the evolution of axially symmetric GB in a Kerr type nonlinear medium. It is shown that PCGO readily provides the solutions of NLS equation obtained earlier from diffraction theory on the basis of the aberration-free approach. Besides reproducing classical results of self-focusing PCGO readily describes an influence of the initial curvature of the wave front on the beam evolution in a medium of Kerr type including a nonlinear graded-index fiber. The range of applicability of the PCGO theory is discussed as well which is helpful for avoiding nonphysical solutions.     

弹性介质中受轴向冲击载荷作用的圆柱壳的屈曲临界载荷计算分析

建立并求解了弹性介质中圆柱壳的径向位移控制方程,考虑边界条件及相容条件,得到了应力波传播及反射过程中圆柱壳的动力屈曲分叉条件.通过计算得到了不同时间段屈曲临界载荷与应力波波阵面到达圆柱壳的位置、弹性介质的刚度、壳体未嵌入弹性介质部分的长度与总长之比的关系.数值计算结果表明,弹性介质中的圆柱壳发生轴对称屈曲和非轴对称屈曲趋势一致;嵌入弹性介质部分越深、弹性介质刚度越大圆柱壳越难屈曲;屈曲临界载荷随着弹性介质刚度的增大经历了增长缓慢、增长迅速以及增长较慢3个阶段;应力波反射前波阵面通过分界面后,屈曲仅发生在应力波传播区域,反射波波阵面通过分界面前,临界载荷较小时屈曲先发生在反射端部,随着轴向阶数增大,屈曲覆盖整个圆柱壳区域,反射波波阵面通过分界面后,壳体发生的屈曲始终覆盖整个圆柱壳区域.