Effects of pyrolysis temperatures on the textural,magnetic, morphology,and catalytic properties of supported nickel nanoparticles

The development of base metal catalysts for industrially important reactions continues to be an important goal of catalysis research. Herein, the effects of pyrolysis temperature on the textural, structural, surface, magnetics properties and catalytic properties of silica-supported nickel nanoparticles (NiNPs) were thoroughly investigated. Mono-dispersed NiNPs encapsulated in graphitic shells were first successfully obtained and were characterized using a variety of methods such as BET surface area measurement, CO-pulse chemisorption, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), high resolution transmission electron microscopy (HR-TEM), and superconducting quantum interference device (SQUID) measurement. The findings showed that all catalysts’ properties were considerably altered with change in pyrolysis temperature. Hydrogenation of diphenylacetylene was then selected as the model reaction for the evaluation of the catalytic performance of the graphitic-shelled NiNPs. After testing, pyrolysis of a nickel at 800 °C (catalyst A) displayed tremendous activity and selectivity to produce >94% of stilbene with selectivities of 99% for the Z-isomer.     

Effect of gemini surfactant additives on pour point depressant of crude oil

Efficiencies of cationic gemini surfactant additives in improving the pour point depressant of crude oil were investigated. The length of alkyl chain is a major factor affecting the improvement of the pour point depression. The adsorption behavior of these gemini surfactants at air/solution and oil/solution interfaces were investigated by measuring the surface tension and interfacial tension as functions of concentration. It is found that there is a good relation between surface properties especially interfacial tension of the gemini surfactants and their efficiency in depressing the pour point. Also, the surface parameters and free energies of micellization and adsorption confirm the decreasing and improving of pour point depression. Crystallization study in crude oil revealed the relationship between the structure and activity of gemini surfactant additives. It is found that the x-ray diffraction patterns of waxes with additives are remarkably different from those without additives. The mechanism of the depressants action has been suggested according the adsorption of each additive. Adsorption of the additive on the surface of the wax particles inhibits their growth and alters the crystal habits through micelle core. Pretreatment of the crude oil with pour point depressants has received the greatest acceptance due to its simplicity and economy.     

A comparative first-principles study on electronic structures and mechanical properties of ternary intermetallic compounds Al8Cr4Y and Al8Cu4Y: Pressure and tension effects

An investigation into the bulk properties, elastic properties and Debye temperature under pressure, and deformation mode under tension of Al₈Cu₄Y and Al₈Cr₄Y compounds was investigated by using first principles calculations based on density functional theory. The calculated lattice constants for the ternary compounds (Al₈Cu₄Y and Al₈Cr₄Y) are in good agreement with the experimental data. It can be seen from interatomic distances that the bonding between Al1 atom and Cr, Y, and Al2 atoms in Al₈Cr₄Y are stronger than Al₈Cu₄Y. The results of cohesive energy show that Al₈Cr₄Y should be easier to be formed and much stronger chemical bonds than Al₈Cu₄Y. The bulk modulus B, shear modulus G, Young's modulus E and Poisson's ratio ν can be obtained by using the Voigt–Reuss–Hill averaging scheme. From the results of elastic properties, Al₈Cr₄Y has the stronger mechanical behavior than Al₈Cu₄Y. Our calculations also show that pressure has a greater effect on mechanical behavior for both compounds. The ideal tensile strength are obtained by stress-strain relationships under [001](001) uniaxial tensile deformation, which are 15.4 and 23.4 GPa for Al₈Cu₄Y and Al₈Cr₄Y, respectively. The total and partial density of states and electron charge density under uniaxial tensile deformations for Al₈Cu₄Y and Al₈Cr₄Y compounds are also calculated and discussed in this work.     

Factorization method and new potentials from the inverted oscillator

In this article we will apply the first- and second-order supersymmetric quantum mechanics to obtain new exactly-solvable real potentials departing from the inverted oscillator potential. This system has some special properties; in particular, only very specific second-order transformations produce non-singular real potentials. It will be shown that these transformations turn out to be the so-called complex ones. Moreover, we will study the factorization method applied to the inverted oscillator and the algebraic structure of the new Hamiltonians.     

Accurate integration over atomic regions bounded by zero‐flux surfaces

The approach for the integration over a region covered by zero‐flux surface is described. This approach based on the surface triangulation technique is efficiently realized in a newly developed program TWOE . The elaborated method is tested on several atomic properties including the source function. TWOE results are compared with those produced by using well‐known existing programs. Absolute errors in computed atomic properties are shown to range usually from 10^?6 to 10^?5 au. The demonstrative examples prove that present realization has perfect convergence of atomic properties with increasing size of angular grid and allows to obtain highly accurate data even in the most difficult cases. It is believed that the developed program can be bridgehead that allows to implement atomic partitioning of any desired molecular property with high accuracy. © 2012 Wiley Periodicals, Inc.     

Self-interstitial solute interaction in aluminium base alloys: Problems of data interpretation

The interpretation of electrical resistivity measurement results of Al base alloys is critically discussed. Correct numerical data evaluation with respect to the atomistic properties r_c/r_p, r_t and Pf^t/Pf is yet impossible for Al and its alloys because of the overlapping of Ic and Id recovery for those electron irradiations for which damage rate measurements exist and because of the unexplained scatter of initial damage rate data.     

Comparing the mechanical response of di‐, tri‐, and tetra‐functional resin epoxies with reactive molecular dynamics

The influence of monomer functionality on the mechanical properties of epoxies is studied using molecular dynamics (MD) with the Reax Force Field (ReaxFF). From deformation simulations, the Young's modulus, yield point, and Poisson's ratio are calculated and analyzed. Comparison between the network structures of distinct epoxies is further advanced by the monomeric degree index (MDI). Experimental validation demonstrates the MD results correctly predict the relationship in Young's moduli. Therefore, ReaxFF is confirmed to be a useful tool for studying the mechanical behavior of epoxies. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 255–264     

Synthesis,anti‐migration and burning rate catalytic mechanism of ferrocene‐based compounds

One of the most important components of solid rocket propellant is the burning rate catalysts (BRC) which enhance burning rate of solid composite propellant. Low‐pressure exponents and stable burning rate are the key features of an excellent solid propellant. Addition of BRC to the propellant results in the increase of burning rate of the propellant and decrease in pressure exponents. Among all BRC, ferrocene‐based BRC have attracted much attention because of their better microscopic homogeneities in distribution, ignitability of the propellants and good compatibility with organic binder. However, the main barrier for the development and practical applications of ferrocene‐based BRC is their migration property. This article reviews the field and highlights recent progress. Copyright © 2014 John Wiley & Sons, Ltd.     

Unraveling σ and π Effects on Magnetic Anisotropy in cis‐NiA4B2 Complexes: Magnetization,HF‐HFEPR Studies,First‐Principles Calculations,and Orbital Modeling

By using complementary experimental techniques and first‐principles theoretical calculations, magnetic anisotropy in a series of five hexacoordinated nickel(II) complexes possessing a symmetry close to C_2v, has been investigated. Four complexes have the general formula [Ni(bpy)X₂]ⁿ⁺ (bpy=2,2′‐bipyridine; X₂=bpy ( 1 ), (NCS^?)₂ ( 2 ), C₂O₄^2? ( 3 ), NO₃^? ( 4 )). In the fifth complex, [Ni(HIM₂‐py)₂(NO₃)]⁺ ( 5 ; HIM₂‐py=2‐(2‐pyridyl)‐4,4,5,5‐tetramethyl‐4,5‐dihydro‐1H‐imidazolyl‐1‐hydroxy), which was reported previously, the two bpy bidentate ligands were replaced by HIM₂‐py. Analysis of the high‐field, high‐frequency electronic paramagnetic resonance (HF‐HFEPR) spectra and magnetization data leads to the determination of the spin Hamiltonian parameters. The D parameter, corresponding to the axial magnetic anisotropy, was negative (Ising type) for the five compounds and ranged from ?1 to ?10 cm^?1. First‐principles SO‐CASPT2 calculations have been performed to estimate these parameters and rationalize the experimental values. From calculations, the easy axis of magnetization is in two different directions for complexes 2 and 3 , on one hand, and 4 and 5 , on the other hand. A new method is proposed to calculate the g tensor for systems with S=1. The spin Hamiltonian parameters (D (axial), E (rhombic), and g_i) are rationalized in terms of ordering of the 3 d orbitals. According to this orbital model, it can be shown that 1) the large magnetic anisotropy of 4 and 5 arises from splitting of the e_g‐like orbitals and is due to the difference in the σ‐donor strength of NO₃^? and bpy or HIM₂‐py, whereas the difference in anisotropy between the two compounds is due to splitting of the t_2g‐like orbitals; and 2) the anisotropy of complexes 1 – 3 arises from the small splitting of the t_2g‐like orbitals. The direction of the anisotropy axis can be rationalized by the proposed orbital model.     

Poly(2‐oxazoline) hydrogels crosslinked with aliphatic bis(2‐oxazoline)s: Properties,cytotoxicity, and cell cultivation

A series of hydrogels from 2‐ethyl‐2‐oxazoline and three bis(2‐oxazoline) crosslinkers—1,4‐butylene‐2,2′‐bis(2‐oxazoline), 1,6‐hexamethylene‐2,2′‐bis(2‐oxazoline), and 1,8‐octamethylene‐2,2′‐bis(2‐oxazoline)—are prepared. The hydrogels differ by the length of aliphatic chain of crosslinker and by the percentage of crosslinker (2–10%). The influence of the type and the percentage of the crosslinker on swelling properties, mechanical properties, and state of water is studied. The equilibrium swelling degree in water ranges from 2 to 20. With a proper selection of the crosslinker, Young's modulus can be varied from 10 kPa to almost 100 kPa. To evaluate the potential for medical applications, the cytotoxicity of extracts and the contact toxicity toward murine fibroblasts are measured. The hydrogels with the crosslinker containing a shorter aliphatic exhibit low toxicity toward fibroblast cells. Moreover, the viability and the proliferation of pancreatic β‐cells incubated inside hydrogels for 12 days are analyzed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1548–1559