发展中国股市必须做到“一个坚持、三个反对”

中国股市为我国社会主义现代化建设和市场经济体制建设作出了不可磨灭的历史贡献，但目前已经陷入由制度设计失败和政策失误导致的危机之中，必须正视股市危机的现实；发展中国股市必须坚持从实际出发、实事求是的原则；必须反对左的思想和行为的干扰，反对生搬硬套、食洋不化的行为，反对官僚主义对完善股市制度建设和投资人利益的漠视。     

新型薄壁柴油机缸体铸件的研制与应用

采用低合金化、合锑多元复合孕育剂、扫描电镜、200h台架试验、以及l000h耐久试验等方法对新型薄壁柴油机缸体铸件进行了研制与应用试验．试验结果表明：碳当量控制在3．9％--4．1％时(与菲亚特缸体的碳当量大体相当)，采用低合金化及合锑复合孕育剂，可稳定获得高强度铸件，抗拉强度σb＞270MPa，硬度HB＞210，白口倾向小，硬度差小于35HB，其性能均达到菲亚特缸体的性能要求．对无缸套缸体的缸壁表面进行激光处理，比传统缸套的耐磨性提高一倍以上．由于采用了无缸套缸体生产技术，简化了柴油机的结构，降低了柴油机的生产成本，提高了柴油机使用性能和技术含量．     

一阶非线性非完整系统的改进的Routh方程

导出了一阶非线性非完整系统的改进的Ｒｏｕｔｈ方程并举例说明其应用，从而提供了建立非完整系统的运动微分方程的一种新方法。该方程的特点在于其第一组方程中只包含系统的独立的广义动量，而第二组方程中不包含任何广义动量。同时，本文结果也是对黄昭度先生的“改进的Ｒｏｕｔｈ方程”一文中的某些错误的修正。     

双层缠绕时偏角对钢绳磨损的影响

本文通过对实验及现场测量结果的综合分析,认为双层缠绕时的偏角变化对钢绳磨损没有显著的影响。     

APPLICATION OF MECHANICAL IMPEDANCE IN VIBRATION ANALYSIS

In the network of a mechanical system,force F and velocity V are related by mechanicalimpedance Z as:Z=F/V.In this paper,we are going to discuss two cases:①Z=0,which gives the frequency equation of the system.We shall use this equation tosolve some practical examples;②Z=∞,which can serve as the design criterion of dynamic dampers.     

机械基础实验平台的整合优化研究

根据中南大学机械基础实验中心整合优化的特点,介绍了机械基础实验平台的基础条件、管理体制、实验教学体系和示范基地的建设。     

CAD技术在机械制图中的应用

根据山西省煤炭地质一一五勘查院CAD技术的应用实践,阐述了在机修中推广CAD技术的必要性,指出了在CAD应用中所遇到的问题及解决方法。     

Influence of moisture on the viscoelastic relaxations in long aliphatic chain contained semiaromatic polyamide, (PA9‐T) fiber

The effect of moisture on the mechanical relaxation processes of semiaromatic semicrystalline polyamides synthesized by a long‐chain aliphatic diamine and terephthalic acid was investigated by dynamic viscoelastic analysis (DVA) and differential scanning calorimetry (DSC). Moreover, the implication of moisture with the amorphous and crystalline domains was also examined by temperature‐dependent wide‐angle X‐ray diffraction and Fourier transform infrared spectra. The characteristics of the relaxations such as α, β, γ, and the pronounced peak shoulder appeared at 25–100 °C in DVA tan δ curves were found to be strongly susceptible to the presence of moisture. With moisture evaporation, the peak shoulder of 25–100 °C and the β‐relaxation disappeared. The former is anticipated to originate from to the side group motion of hydrogen‐bonded water, whereas the later one is from the motions of the amide–water complex units. With the disappearance of the β‐relaxation, the γ‐relaxation appeared simultaneously in much lower temperatures and ultimately coupled with the δ‐relaxation. The γ‐relaxation is attributed to be associated with the molecular motion of the amide group and δ‐relaxation with for the motion of the methylene units. The existence of two types of water was identified in the polymer, namely, tightly bound and loosely bound. The tightly bound water is believed to be directly connected by hydrogen bonding with the strong polar groups and the loosely bound water weakly links with those connected water making hydrogen bridges. The moisture acts as a plasticizer in the polymer matrix, which causes quite a large depression in its glass transition temperature (T_g). WAXD and FTIR studies corroborated the existence of water solely in amorphous regions, i.e., no rapport of water with the crystalline parts. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2878–2891, 2003     

Determination of the rheological behavior of epoxy–amine thermosets by dynamic mechanical analysis: Isothermal methods versus nonisothermal methods

The reticulation process of an epoxy resin using an amine as a cure agent was studied at different temperatures and concentrations of the cure agent with dynamic mechanical thermal analysis. The study was performed under both isothermal and nonisothermal conditions, and a temperature–time–transformation diagram was obtained. The measurements from the two modes gave similar results, although the nonisothermal mode required fewer experiments. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1965–1977, 2003     

浅析机械制图教学与创新教育

文章阐述了在机械制图教学中，如何培养学生画图、读图能力与创新能力，以及它们两者间的辩证关系。