运动玻璃等级标记的在线提取和识别

为了识别浮法玻璃生产线上玻璃的等级标记 ,实现玻璃的自动化分等级堆垛 ,本文提出了运用减影的方法提取运动玻璃上的等级标记 ,并提出了一种基于膨胀的识别目标的新方法 ,此方法源于在包含标记的二值图象中 ,从标记区到背景区黑色象素点 (灰度值为零 )的个数大幅度减少的现象。玻璃等级动态在线识别系统的应用实践表明 ,本文提出的方法运算速度快 ,标记的识别率高     

一阶差分方程解振动的充分必要条件

得到一阶差分方程：An 1－An＋m∑i=1piAn-ki i∑j=1qjAn-lj＝0解振动的充分必要条件，这里pi∈R，ki∈Z,qj∈R,ri∈{-1,0},i＝1，2，…，m；j＝1，2，…，l。这些结果包含并推广了相关文献的定理，而且更系统化。     

散斑条纹的快速高精度处理技术

本文提出一种快速高精度散斑杨氏条纹(斑纹)场处理方法——同态阀值滤波法。用它实现了散斑场条纹的快速、逐点连续高精度处理。     

ICP方法匹配深度图像的实现

针对ICP(迭代最近点 )方法中寻找深度像之间点对应关系这一难点问题 ,首先介绍对ICP方法匹配深度图像的原理并给出单位四元数和旋转角度间的关系 ,然后提出一种验证两个深度图像中对应点对有效性的方法 ,给出了判断待匹配深度图像之间的点对应条件的准则 ,同时给出了实现这种准则的数据结构以及程序设计思想 .最后 ,用真实深度图像证明此方法的有效性 ,并用“主次缝合线”法合成匹配后的深度图像     

TP801控制凝固点降低法测定分子量

介绍用ＴＰ＿（８０１）微机控制凝固点降低法测定分子量的有关原理和技术，与传统的用贝克曼温度计测△Ｔ方法相比，扩大了测量范围，提高了精密度，工作条件得到改善．     

Dynamics of liquid membranes. II: Adaptive finite difference methods

Two domain-adaptive finite difference methods are presented and applied to study the dynamic response of incompressible, inviscid, axisymmetric liquid membranes subject to imposed sinusoidal pressure oscillations. Both finite difference methods map the time-dependent physical domain whose downstream boundary is unknown onto a fixed computational domain. The location of the unknown time-dependent downstream boundary of the physical domain is determined from the continuity equation and results in an integrodifferential equation which is non-linearly coupled with the partial differential equations which govern the conservation of mass and linear momentum and the radius of the liquid membrane. One of the finite difference methods solves the non-conservative form of the governing equations by means of a block implicit iterative method. This method possesses the property that the Jacobian matrix of the convection fluxes has an eigenvalue of algebraic multiplicity equal to four and of geometric multiplicity equal to one. The second finite difference procedure also uses a block implicit iterative method, but the governing equations are written in conservation law form and contain an axial velocity which is the difference between the physical axial velocity and the grid speed. It is shown that these methods yield almost identical results and are more accurate than the non-adaptive techniques presented in Part I. It is also shown that the actual value of the pressure coefficient determined from linear analyses can be exceeded without affecting the stability and convergence of liquid membranes if the liquid membranes are subjected to sinusoidal pressure variations of sufficiently high frequencies.     

基于现场称重测试系统的设计与研究

依据系统结构原理，推导出数学模型，提出一种适于称重传感器测试系统的控制策略。根据该测试系统的特点，建立误差补偿模型，确定数据处理方法。 试验结果表明，整个测试系统简洁、高效、可靠；控制方案简单、易行，满足系统的性能要求；所采取的误差补偿办法切实可行， 经过处理的测试数据能够准确反映传感器测试系统的性能。     

Multivariate Gini Indices

Two extensions of the univariate Gini index are considered:R_D, based on expected distance between two independent vectors from the same distribution with finite meanμ ^d; andR_V, related to the expected volume of the simplex formed fromd+1 independent such vectors. A new characterization ofR_Das proportional to a univariate Gini index for a particular linear combination of attributes relates it to the Lorenz zonoid. TheLorenz zonoidwas suggested as a multivariate generalization of the Lorenz curve.R_Vis, up to scaling, the volume of the Lorenz zonoid plus a unit cube of full dimension. Whend=1, bothR_DandR_Vequal twice the area between the usual Lorenz curve and the line of zero disparity. Whend>1, they are different, but inherit properties of the univariate Gini index and are related via the Lorenz zonoid:R_Dis proportional to the average of the areas of some two-dimensioned projections of the lift zonoid, whileR_Vis the average of the volumes of projections of the Lorenz zonoid over all coordinate subspaces.     

临汾凹陷区主要活动断裂卫星影像分析

论述了活动断裂的一般影像特征，对临汾凹陷区主要活动断裂构造的卫星影像进行了分析，从而论证了应用卫星影像可以查明活动断裂的具体特征、力学性质及活动方式等，使人类进一步认识断裂构造的活动规律，将其所造成的自然灾害损失降至最低。     

Improvement of the properties of polyarylate reinforced with liquid crystalline polymers

Blends of polyarylate of bisphenol A, PAr, with two commercial main chain liquid crystalline polymers, Vectra A950 and Vectra B950, are studied. From dynamic viscoelastic measurements it is deduced that both systems (PAr/Vectra A950 and PAr/Vectra B950) are immiscible and scanning electron microscopy (SEM) micrographs show the presence of spherical domains of the liquid crystalline polymer when PAr constitutes the matrix. Extrusion capillary measurements reveal that, under conditions of temperature and shear rate similar to those of processing, the viscosity is reduced to approximately 10% of its value when the content of liquid crystalline polymer is only 20%. This great improvement of the rheological properties is observed in both PAr/Vectra A950 and PAr/Vectra B950 blends. The effect of draw ratio on Young's modulus for different compositions is also analyzed, pointing out the reinforcing action of both liquid crystalline polymers on polyarylate: for instance, 20% of Vectra B950 in the blend gives rise to a 700% increase of the modulus of fibres prepared at a draw ratio of 50. SEM of the extrudates reveals that the spherical domains are elongated at the entrance of the capillary giving rise to a microfibrillar morphology which is related to the excellent rheological and mechanical properties of the blends.