Propagation of mesons in asymmetric nuclear matter in a density-dependent coupling model

We study the propagation of the light mesons σ,ω,ρ, and a₀(980) in dense hadronic matter in an extended derivative scalar coupling model. Within the scheme proposed it is possible to unambiguously define effective density-dependent couplings at the Lagrangian level. We first apply the model to study asymmetric nuclear matter with fixed isospin asymmetry, and then we pay particular attention to hypermatter in β-equilibrium. The equation of state and the potential contribution to the symmetry coefficient arising from the mean-field approximation are investigated. Received: 16 October 2001 / Accepted: 10 January 2002     

Network externalities in a dynamic monopoly

We reconsider the role of network externalities in a dynamic spatial monopoly where the firm must invest in order to accumulate capacity, while consumers may have either linear or quadratic preferences. We (1) characterise saddle point equilibria, (2) prove that the extent of market coverage is increasing in the network effect and (3) unlike the existing static literature on the same problem, the monopolist may not make introductory price offers. Then, we briefly deal with the socially optimal solution, showing that, in general, a planner would serve more consumers than a profit-seeking monopolist.      

Cosmological Consequences of Scale-Related Comoving Masses for Cosmic Pressure, Mass, and Vacuum Energy Density

According to ideas of Mach, Whitrow, Dirac, or Hoyle, inertial masses of particles should not be a genuine, predetermined quantity; rather they should represent a relational quantity which by its value somehow reflects the deposition and constellation of all other objects in their cosmic environment. In this paper we want to pick up suggestions given by Thirring and by Hoyle of how, due to requirements of the equivalence of rotations and of general relativistic conformal scale invariance, the particle masses of cosmic objects should vary with the cosmic length scale. We study cosmological consequences of comoving cosmic masses which co-evolve by mass with the expansion of the universe. The vanishing of the covariant divergence of the cosmic energy-momentum tensor under the new prerequisite that matter density only falls off with the reciproke of the squared cosmic scale S(t) then leads to the astonishing result that cosmic pressuredoes not fall off adiabatically but rather falls off in a quasi-isothermal behaviour, varying with S(t) as matter density does. Hence, as a new cosmological fact, it arises that, even in the late phases of cosmic expansion, pressure cannot be neglected what concerns its gravitational action on the cosmic dynamics. We then show that under these conditions the cosmological equations can, however, only be solved if, in addition to matter, also pressure and energy density of the cosmic vacuum are included in the calculation. An unaccelerated expansion with a Hubble parameter falling off with S(t)⁻¹ is obtained for a vacuum energy density decay according to S(t)⁻² with a well-tuned proportion of matter and vacuum pressures. As it appears from these results, a universe with particle masses increasing with the cosmic sale S(t) is in fact physically conceivable in an energetically consistent manner, if vacuum energy at the expansion of the universe is converted into mass density of real matter with no net energy loss occuring. This universe in addition also happens to be an economical one which has and keeps a vanishing total energy.     

Local existence for the one‐dimensional Vlasov–Poisson system with infinite mass

A collisionless plasma is modelled by the Vlasov–Poisson system in one dimension. We consider the situation in which mobile negative ions balance a fixed background of positive charge, which is independent of space and time, as ∣x∣ → ∞. Thus, the total positive charge and the total negative charge are both infinite. Smooth solutions with appropriate asymptotic behaviour are shown to exist locally in time, and criteria for the continuation of these solutions are established. Copyright © 2006 John Wiley & Sons, Ltd.     

Latex particles bearing hydrophilic grafted hairs with controlled chain length and functionality synthesized by reversible addition–fragmentation chain transfer

A method is described for synthesizing latex particles with anchored hairs by the grafting of hydrophilic chains, synthesized by reversible addition–fragmentation chain transfer, onto functionalized latex particles. These have the potential to bind biologically active species. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1188–1195, 2003     

Solid phase extraction for analysis of biogenic carbonates by electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS): an investigation of rare earth element signatures in otolith microchemistry

Uptake of trace elements into fish otoliths is governed by several factors such as life histories and environment in addition to stock and species differences. In an attempt to elucidate the elemental signatures of rare earth elements (REEs) in otoliths, a solid phase extraction (SPE) protocol was used in combination with electrothermal vaporization (ETV) as a sample introduction procedure for the determinations by inductively coupled plasma quadrupole mass spectrometry (ICP-MS). Effects of various parameters, such as carrier gas flow rate, atomization temperature and chemical modification, were examined for optimization of the conditions by ETV-ICP-MS. Atomization was achieved at 2800 °C. Lower temperatures (i.e. 2600 °C) resulted in severe memory problems due to incomplete atomization. Palladium was used as a chemical modifier. It was found that an increase in Pd concentration up to 0.5 μg in the injection volume (70 μl) led up to four-fold enhancement in the integrated signals. This phenomenon is attributed to the carrier effect of Pd rather than the stabilization since no significant losses were observed for high temperature drying around 700 °C even in the absence of Pd. Preconcentration was performed on-line at pH 5 by using a mini-column of Toyopearl AF-Chelate 650M chelating resin, which also eliminated the calcium matrix of otolith solutions. After preconcentration of 6.4 ml of solution, the concentrate was collected in 0.65 ml of 0.5% (v/v) HNO₃ in autosampler cups, and then analyzed by ETV-ICP-MS. The method was validated with the analysis of a fish otolith certified reference material (CRM) of emperor snapper, and then applied to samples. Results obtained from otoliths of fish captured in the same habitat indicated that otolith rare earth element concentrations are more dependent on environmental conditions of the habitat than on species differences.     

Mass‐lumping or not mass‐lumping for eigenvalue problems

In this article we analyze the effect of mass‐lumping in the linear triangular finite element approximation of second‐order elliptic eigenvalue problems. We prove that the eigenvalue obtained by using mass‐lumping is always below the one obtained with exact integration. For singular eigenfunctions, as those arising in non convex polygons, we prove that the eigenvalue obtained with mass‐lumping is above the exact eigenvalue when the mesh size is small enough. So, we conclude that the use of mass‐lumping is convenient in the singular case. When the eigenfunction is smooth several numerical experiments suggest that the eigenvalue computed with mass‐lumping is below the exact one if the mesh is not too coarse. © 2003 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 19: 653–664, 2003     

贝壳固硫过程热重研究

利用LCT-2型热天平对贝壳的固硫反应过程进行了实验研究。探讨了贝壳在含SO2模拟烟气气氛下的固硫能力、温度特性及SO2浓度对其钙利用率的影响特性;并利用JXA-840扫描电镜实验观察了贝壳与石灰石微观结构特性的主要差别。结果表明:贝壳具有良好的微观结构特性和固硫反应活性,其最佳固硫反应温度比石灰石高出约100℃,大部分贝壳更适合作900~1000℃温度下的燃煤固硫剂。     

激光溅射Ni等离子体与气相CH3OH团簇的反应

用激光溅射 分子束技术研究了气相中Ni的等离子体与甲醇分子团簇的反应 .观察到Ni+ (CH3 OH) n、NiO+ (CH3 OH) n、H+ (CH3 OH) n、H3 O+ (CH3 OH) n 四个种类的团簇正离子和CH3 O-(CH3 OH) n(n≤ 2 5 )一种团簇负离子 .详细考察了激光烧蚀等离子体作用于脉冲分子束的不同位置时 ,对团簇产物种类和团簇尺寸大小的影响 .发现NiO+ (CH3 OH) n 是由Ni+ (CH3 OH) n 团簇内的脱甲烷反应生成的 ,而H+ (CH3 OH) n、H3 O+ (CH3 OH) n主要是激光等离子体中的电子与甲醇团簇碰撞电离产生的     

Synthesis and characterization of isotopically enriched methylmercury (CH3201Hg+)

A simple procedure for the synthesis of an important standard, isotopically enriched methylmercury, which is not commercially available, has been established successfully. The isotopically enriched standard synthesized is utilized in conventional isotope dilution mass spectrometry (IDMS), as well as in speciated IDMS (SIDMS), for determination of the true concentration of methylmercury in environmental samples. The CH₃²⁰¹Hg⁺ standard has been synthesized from commercially available ²⁰¹HgO and tetramethyltin. The synthesis time required is 1 h at 60°C. The product is highly pure, yielding more than 90% as ²⁰¹Hg in CH₃²⁰¹Hg⁺. Hazardous dimethylmercury does not occur during this synthesis procedure. The product synthesized was analyzed using high‐performance liquid chromatography coupled with inductively coupled plasma mass spectrometry (ICP‐MS) and ICP‐MS alone in order to determine its concentration, isotopic composition and purity. The stability of the product was also evaluated for over 6 months and found to be stable at 4°C in the dark. The isotopically enriched methylmercury synthesized can be used in SIDMS and IDMS analyses as a standard. Copyright © 2003 John Wiley & Sons, Ltd.