Black phosphorus saturable absorber for ultrafast mode‐locked pulse laser via evanescent field interaction

Black phosphorus, or BP, has found a lot of applications in recent years including photonics. The most recent studies have shown that the material has an excellent optical nonlinearity useful in many areas, one of which is in saturable absorption for passive mode‐locking. A direct interaction scheme for mode‐locking, however, has a potential to optically cause permanent damage to the already delicate material. Evanescent field interaction scheme has already been proven to be a useful method to prevent such danger for other 2‐dimensional nanomaterials. In this report, we have utilized the evanescent field interaction to demonstrate that the optical nonlinear characteristics of BP is sufficiently strong to use in such an indirect interaction method. The successful demonstration of the passive mode‐locking operation has generated pulses with the pulse duration, repetition rate, and time bandwidth product of 2.18 ps, 15.59 MHz, and 0.336, respectively.     

聚乙烯中炭黑含量不同测试方法的探讨

采用GB 13021《聚乙烯管材和管体炭黑含量测定(热失重法)》和热重分析仪法两种方法测定了聚乙烯中炭黑含量。对两种方法的测定结果进行了比较,结果表明,两种方法均有良好的重复性和准确度,测定结果基本一致,采用不同方法得到的测定结果间可以相互参考。     

Micellar Enhanced Ultrafiltration of Reactive Black 5 from Aqueous Solution by Cationic Surfactants

Reactive black 5 (RB-5) dye was removed from a water stream using two cationic surfactants, cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC), via micellar enhanced ultrafiltration. Three membranes with different pore size were used for the determination of rejection coefficient and permeate flux of the solution at 1.5 bar trans-membrane pressure (TMP). The two surfactants (CPC and CTAB) played an almost negligible role in rejection efficiency with 5000 and 10,000 molecular weight cut-off membrane (MWCO), respectively. In this case, high rejection and low permeate flux was the result of a larger molecular size of RB-5 DYE being retained by comparatively smaller sized pores of membrane via ultrafiltration. However, CPC and CTAB surfactants showed 83% and 98% rejection coefficient, respectively, at a concentration greater than their CMC values against 30,000 MWCO. Permeate flux remained low and constant in presence of 5000 and 10,000 MWCO with a small variation against 30,000 MWCO for the two surfactants, thereby no appreciable effect on both surfactant concentrations on concentration polarization was estimated. Thus, RB-5 dye alone was determined to be responsible for membrane plugging or concentration polarization and ultimately for low permeate flux. The effect of trans-membrane pressure was also investigated during this study.     

Ionic hexagonal columnar metallomesogens derived from tetrabenzo[b,f,j,n] [1,5,9,13]tetraazacyclohexadecine

A series of transition metal (Ni, Cu, Pd) complexes derived from macrocyclic tetrabenzo[b,f,j,n] [1,5,9,13]tetraazacyclohexadecine (TAAB) was synthesized and their mesomorphic properties studied by differential scanning calorimetry, polarized optical microscopy and X-ray powder diffraction (XRD). These compounds have eight alkoxy side chains attached around the central molecular core and form disc-like molecules. All the derivatives exhibited columnar mesophases over a wide range of temperature. The mesomorphic behaviour was found to be dependent on the incorporated metal and the carbon length of the alkoxy side chains. The clearing temperatures decreased in the order M = Ni > Pd > Cu; this decrease was probably due to the size of the metal ions. Some derivatives with shorter side chains (n = 10, 12) were room temperature liquid crystals. All compounds were found to exhibit hexagonal columnar (Col_h) phases which were confirmed by powder XRD.     

A rapid and effective method for silver staining of PCR products separated in polyacrylamide gels

With the development of molecular quantitative genetics, particularly, genetic linkage map construction, quantitative trait loci mapping or genes fine mapping and association analysis etc., more and more PCR products separated in polyacrylamide gels need to be silver‐stained. However, conventional silver‐staining procedures are complicated and time‐consuming as they require a lot of preparation and handling of several solutions prior to use. In this study, a simple and rapid protocol for silver staining of PCR products was developed. The number of steps was reduced compared to conventional protocols, thus achieving detection of PCR products in 7 min, saving time and resources. Fixation and staining solution and developing solution in present staining procedure allowed a reutilization for 12 and 8 times, respectively, reducing the cost greatly. Meanwhile, the sensitivity was significantly improved with the improved method and the minimum of 0.097 ng/μL of DNA amount can be detected in denaturing polyacrylamide gel. The protocol developed in this study will facilitate the development of molecular quantitative genetics.     

Topography and field effects in the inner side of microvia hole using ToF‐SIMS

We have developed a simple and powerful method, which is called ‘angled sample holder method’, to characterize a topographic structured sample such as microsized via hole of ball grid array using time‐of‐flight SIMS. The diameter of via holes was 100 µm and the depth was 70 µm. To remove the shaded area by incidence primary ion beam and to extract secondary ions from the bottom of a via hole, several types of angled sample holders with compensation steering plate were applied on the basis of simulation results using SIMION code. And the analyses using angled sample holder method enabled us to characterize the bottom and side wall of a via hole in clear. Copyright © 2014 John Wiley & Sons, Ltd.     

爆炸条件下溶菌酶反应产物的基质辅助激光解吸-飞行时间质谱分析

以爆炸条件下溶菌酶的反应产物为研究对象,运用基质辅助激光解吸-飞行时间质谱的方法研究其反应产物与不同炸药的反应特征性.结果显示,雷管的使用不会对溶菌酶有影响,而在有爆炸物爆炸的条件下,除了正常溶菌酶酶解多肽信号外,一些[MH+17]+,[MH+18]+,[MH+28]+,[MH+32]+和[MH+44]+的加合峰信号也能被检测到.这可能是在炸药爆炸过程中产生的一些活性小分子(如NH3,H2O,CO/N2,O2,CO2)与溶菌酶发生反应得到的反应产物.不同炸药生成的活性小分子能够分别与溶菌酶的某些反应位点反应生成特征性的反应产物,有利于这些炸药的分析与检测.     

反式钙钛矿电池超薄空穴传输层研究进展

空穴传输层(HTLs)厚度对反式钙钛矿太阳能电池(PSCs)性能具有重大影响,因其显著影响太阳光透过和HTLs的空穴传输性能。几个纳米至十几个纳米厚度的超薄HTLs在减少伴生吸收、电荷传输损失和材料消耗等方面具有明显优势。目前,有许多成熟的制备超薄无机HTLs的方法,并在反式和叠层PSCs中得到广泛研究与应用。最近,一些关于有机超薄HTLs的新型制备方法也展现出良好的性能并逐渐引起相关领域研究者关注。在此,本文主要总结反式PSCs中超薄HTLs的研究进展与应用,关注其未来发展的挑战和方向,为该领域进一步的研究提供参考。