Highly soluble and optically transparent poly (ether imide)s based on 2,6‐ or 2,7‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride and aromatic bis(ether amine)s bearing trifluoromethyl groups

Two series of novel fluorinated poly(ether imide)s (coded IIIA and IIIB ) were prepared from 2,6‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride and 2,7‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride, respectively, with various trifluoromethyl‐substituted aromatic bis(ether amine)s by a standard two‐step process with thermal or chemical imidization of the poly(amic acid) precursors. These fluorinated poly(ether imide)s showed good solubility in many organic solvents and could be solution‐cast into transparent, flexible, and tough films. These films were nearly colorless, with an ultraviolet–visible absorption edge of 364–386 nm. They also showed good thermal stability with glass‐transition temperatures of 221–298 °C, 10% weight loss temperatures in excess of 489 °C, and char yields at 800 °C in nitrogen greater than 50%. The 2,7‐substituted IIIB series also showed better solubility and higher transparency than the isomeric 2,6‐substituted IIIA series. In comparison with nonfluorinated poly (ether imide)s, the fluorinated IIIA and IIIB series showed better solubility, higher transparency, and lower dielectric constants and water absorption. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5909–5922, 2006     

Synthesis and characterization of novel perfluorinated polyimides with 3D‐controlled structures for photonic applications

We have designed and synthesized novel perfluorinated polyimides with 3D controlled structure. At first, we successfully developed the new synthetic routes to diamines with pendant bulky perfluorinated aromatic units in a multi‐step synthetic procedure. Novel perfluorinated polyimides were prepared in a two‐step reaction in N‐methyl‐2‐pyrrolidinone (NMP) solution: The first step was for the synthesis of polyamic acids (PAAs) and the second reaction was for the imidization of PAA. The polymer yield was over 89% and the inherent viscosity of PAAs was in the range of 0.24–0.36 dL/g. The thin films were prepared by spin‐coating the PAA solution in NMP onto various substrates such as a Si wafer or a KBr pellet, dried at 80 °C and further cured at 230 °C. The resultant polyimides are thermally stable over 400 °C. The refractive index and birefringence of the resultant polyimides are 1.5858–1.6452 and 0.01–0.005, respectively. The refractive index of polyimide decreases with increasing the fluorine content. The copolymerization and the ether linkages into the backbone reduce the birefringence of polyimides. Surprisingly, the pendant ether linkage is not a crucial factor in reducing the polyimide birefringence. Their birefringence is comparatively very low, compared with that of previous polyimides. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1326–1342, 2006     

Divinylsiloxane‐bisbenzocyclobutene‐based polymer modified with polystyrene–polybutadiene–polystyrene triblock copolymers

Divinylsiloxane‐bisbenzocyclobutene (DVS‐bisBCB) polymer has very low dielectric constant and dissipation factor, good thermal stability, and high chemical resistance. The fracture toughness of the thermoset polymer is moderate due to its high crosslink density. A thermoplastic elastomer, polystyrene–polybutadiene–polystyrene triblock copolymer, was incorporated into the matrix to enhance its toughness. The cured thermoset matrix showed different morphology when the elastomer was added to the B‐staged prepolymer or when the elastomer was B‐staged with the DVS‐bisBCB monomer. Small and uniformly distributed elastomer domains were detected by transmission electron micrographs (TEM) in the former case, but TEM did not detect a separate domain in the latter case. A high percentage of the polystyrene–polybutadiene–polystyrene triblock copolymer could be incorporated into the DVS‐bisBCB thermoset matrix by B‐staging the triblock copolymer with the BCB monomer. The elastomer increased the fracture toughness of DVS‐bisBCB polymer as indicated by enhanced elongation at break and increased K1c values obtained by the modified edge‐lift‐off test. Elastomer modified DVS‐bisBCB maintained excellent electrical properties, high T_g and good thermal stability, but showed higher coefficient of linear thermal expansion values. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1591–1599, 2006     

用玻尔理论测量普朗克常数

提出用玻尔氢原子理论测量普朗克常数的原理和测量结果。     

双轴等拉低周疲劳实验装置

本文给出能在一般单向加载液压疲劳试验机上做双轴等拉低周疲劳实验研究的双向拉伸装置,并对有关影响因素进行了讨论。 本试验是在百吨液压低周疲劳试验机上进行的。双向拉体装置已经受近百万次疲劳载荷,其中交变载荷幅围5.5,t亦经受近20万次。在使用过程,各构件完好合手使用要求,将十字试样进行低周疲劳断裂试验,成功地开出合格裂纹,用它进行超速条件下叶轮材料性能研究亦取得初步结果。可以认为它适用于平而应力集中问题低周疲劳性能的研究。若使用液压高、中周疲劳试验机,它还可用于双轴载荷下裂纹试样裂纹扩展的研究。 本文指出了双向拉伸装置有待改进的方面。     

The influence of the mercury and thallium atoms in organomercury and organothallium nitroxyl radicals on their reactivity

An increase is found in the reactivity of organomercury and organothallium nitroxyl mono- and biradicals of the imidazoline type in comparison with the analogous compounds without organometallic fragments. This is explained by the formation of coordination bonds NHg, NTl, and NOHg.Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 224–226, January, 1993.     

Concentrated electrolyte solutions at high temperatures and pressures

A survey is given of recent experimental results obtained from high-temperature, high-pressure investigations with water, aqueous solutions, and ionic fluids. Data on the static dielectric constant of water to 550°C and 5 kbar are given and discussed with respect to their relation to water structure. Infrared and Raman spectra of HDO in pure water have been obtained to 400°C and 4 kbar, which give information on hydrogen bonding. Xe–H₂O and CO₂–H₂O mixtures were investigated in the infrared. Ni(II) and Cu(II) complexes were investigated by absorption spectroscopy in aqueous solutions of high chloride content to 350°C and 2–6 kbar. The gas-liquid critical point of ammonium chloride was found at 880°C and 1635 bars. This fluid appears to be predominantly ionic even in the critical region. The possibility of converting pure polar fluids such as ammonia and water into concentrated ionic solutions by self-ionization at very high pressures is mentioned.This paper was presented at the symposium, The Physical Chemistry of Aqueous Systems, held at the University of Pittsburgh, Pittsburgh, Pennsylvania, June 12–14, 1972, in honor of the 70th birthday of Professor H. S. Frank.     

震区中小跨径桥梁墩柱配筋率取值范围

为研究配筋率对钢筋混凝土桥梁延性抗震性能的影响,并在不同设防烈度对主筋配筋率的合理取值进行细分。以钢筋混凝土桥梁为研究对象,通过拟静力模型试验与有限元数值分析的方法,研究竖向钢筋(主筋)配筋率对桥墩延性的影响,提出典型桥墩的多级性能水平量化指标;并探究在氯离子侵蚀的恶劣环境下,不同配筋率对桥梁抗震性能所带来的影响,从而对氯离子侵蚀环境下的震区中小跨径桥梁墩柱配筋率取值范围提供参考建议。结果表明：考虑氯离子侵蚀作用下的恢复力模型能够较好地反映刚度的退化特性,墩柱的最佳配筋率取值范围为1.11%～2.72%;当加速度为0.3g(g为重力加速度)时,仅从配筋率的角度已无法满足墩柱的损伤指标,建议采用减隔震体系进行抗震设计,如采用延性体系时配筋率不得小于2.64%。研究结果可为中小跨径连续桥梁抗震设计提供参考。     

钼对低合金钢硝酸盐体系应力腐蚀的影响

以高风温热风炉用钢的沿晶应力腐蚀开裂问题为背景,研究了Ｍｏ对低合金钢在硝酸盐溶液中的应力腐蚀行为。结果表明,低合金钢中加入合金元素将使钢中贝氏体和／或珠光体含量增大,从而提高了材料的稳定性和抗ＳＣＣ耐蚀性。提出了低合金钢／硝酸盐溶液体系的“温度－钼含量－ＳＣＣ图”。     

Self-avoiding walks and trees in spread-out lattices

LetG _R be the graph obtained by joining all sites ofZ ^d which are separated by a distance of at mostR. Let (G _R ) denote the connective constant for counting the self-avoiding walks in this graph. Let (G _R ) denote the coprresponding constant for counting the trees embedded inG _R . Then asR, (G _R ) is asymptotic to the coordination numberk _R ofG _R , while (G _R ) is asymptotic toek _R. However, ifd is 1 or 2, then (G _R )-k _R diverges to –.Dedicated to Oliver Penrose on this occasion of his 65th birthday.