An experimental study of dynamic tensile properties of glass fiber at low-temperatures

Tensile impact experiments of EC8.0−24×7 glass fiber bundles at different low temperaturesT(14°C, −40°C and −10°C) and strain rates ɛ were carried out, and complete stress-strain curves were obtained. Within the range of the experiment temperatures and strain rates, it is found that the initial modulusE, the ultimate strength σ_max and the unstable strain ɛ _b of the glass fiber bundles all increase with ɛ at an identicalT. At an identical ɛ, with the decrease ofT, E and σ_max increase; but ɛ _b increases when 10°C>T>−40°C and decreases when −40°C>T>−100°C. The strain-rate- and temperature-dependent bimodal Weibull statistical constitutive theory was adopted for the statistical analysis of the experimental results, and the Weibull parameters of single fiber were obtained. The results show that the bimodal Weibull distribution function is suitable to represent the strength distribution of the glass fiber at low temperature and different strain rates. The differences in the mechanical properties between EC8.0−24×7 and EC5.5−12 ×14 glass fiber bundles were also discussed. Project supported by the National Natural Science Foundation of China (No. 19772058).     

接触载荷作用下的表面裂纹分析

用边界积分方法分析了表面裂纹在接触载荷作用下的张开位移和应力强度因子，该方法将埋在无穷大弹性介质中裂纹模拟为连续分布的位错环，根据两个位错环之间的相互作用能可以得到弹性体的应变能，对弹性体的势能取极值，可以得到关于裂纹张开位移的边界积分方程，通过把半空间的边界模拟成一个包含在无穷大弹性介质中大裂纹，该方法能用已有的边界积分方法很好的处理具有任意表面形状的表面裂纹，文中算例分析了不同倾角的表面裂纹在法向和切向接触载荷作用下，裂纹尖端的应力强度因子，其结果对于分析路面表面裂纹的扩展具有重要意义。     

高毒低效农药在土壤中的行为

对农药在土壤中的历程，残留及分解以及和微生物的关系作了较详的研究报导，在保护环境以及确保人类需求食品安全的今天，开展这类课题的研究有着重要的现实意义。     

Review of chiral perturbation theory

A review of chiral perturbation theory and recent developments on the comparison of its predictions with experiment is presented. Some interesting topics with scope for further elaboration are touched upon.     

光栅衍射实验中一个不容忽视的环节

针对光栅衍射实验中出现的操作问题,简述了仪器调节不满足计算公式成立的条件时,引起的测量误差,并给出了正确的做法。     

Φ12LMQ型钢筋冷拉机原理及主要参数选择

介绍了一种新型钢筋冷拉机的工作原理和主要参数：变形速度Ｖ△Ｌ、单位时间伸长率ε、送进速度Ｖ２、冷拉速度Ｖ１及其之间的关系．这种冷拉机具有生产率高、冷拉质量稳定等特点．     

Molecular Orbital Calculations on 2, 4, 6-Trinitrotoluene

Three ab initio calculations (HF/6-3IG, HF/6-3IG*, and HF/6-3IG**) on 2,4,6-trinitrotoluene were made, The results compare well with xray data, except dihedral angles of NO₂ relative to the plane of the benzene ring. The deviations are attributed to packing forces and steric effects in the crystal. The most stable structure was a torsional angle 10° of the methyl top with the benzene ring, unlike toluene. The rotational barriers of the methyl top and the 4-nitro group are small. Hydrogen bonding, dipole moments and total atomic charges arc calculated.     

RSCRR空间5杆变角机构的结构和几种位置分析方法

本文对有名的 RSCRR 空间5杆变角机构进行了结构分析,进而用4种不同的方法对其进行位置分析,得出了相同的结论,证明了机构输出角δ与输入角α的关系是δ:arcsin[ctgλtg(arcctg((a/e)+cisa)/(sina))],并用实例证明了结论的正确。     

Trefftz,collocation, and other boundary methods—A comparison

In this article we survey the Trefftz method (TM), the collocation method (CM), and the collocation Trefftz method (CTM). We also review the coupling techniques for the interzonal conditions, which include the indirect Trefftz method, the original Trefftz method, the penalty plus hybrid Trefftz method, and the direct Trefftz method. Other boundary methods are also briefly described. Key issues in these algorithms, including the error analysis, are addressed. New numerical results are reported. Comparisons among TMs and other numerical methods are made. It is concluded that the CTM is the simplest algorithm and provides the most accurate solution with the best numerical stability. © 2006 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2007