电气线路互联系统线缆抗高空核电磁脉冲耦合效应

高空核电磁脉冲（HEMP）对电子设备的耦合途径主要有两方面：一方面是通过装备（产品）上的天线耦合通道进入到电子系统内的“前门耦合”方式;另一方面则是“后门耦合”,即通过装备（产品）上的壳体、电源线、电缆、机箱的缝隙、孔洞等途径进行耦合。主要研究电气线路互联系统(EWIS)线缆抗高空核电磁脉冲耦合效应,通过研究HEMP干扰的特征、能量分布,搭建HEMP数学模型,采用控制变量法,改变EWIS线缆类型、离地高度等要素,通过在CST上建立仿真模型以及开展试验,分析HEMP对电子设备造成的影响程度,得到HEMP耦合效应的一般性结论与规律。     

催化蒸馏塔中反应对精馏作用影响的分析

提出了分析催化蒸馏塔中反应过程对精馏作用影响的一种方法,并以异丙醇脱氢的催化蒸馏为实例进行了分析与计算。结果表明,反应过程对精馏过程有影响。     

玉米株高和穗位高遗传基础的QTL剖析

玉米是世界范围内具有经济重要性的作物之一.株高和穗位高是玉米育种过程中需考虑的2个重要农艺性状,对玉米产量、抗倒伏性及株型等都有较大影响.为进一步明确玉米株高和穗位高的遗传机制,本研究以B73×Zheng58的含有165个株系的F3∶4重组自交系群体为作图群体,利用覆盖玉米10条染色体189个SSR标记对株高和穗位高进行QTL定位分析.总共定位到5个株高QTL和6个穗位高QTL;这11个QTL分布在除2号和6号之外的其他8条染色体上.单个QTL表型变异贡献率的变幅为4.3%~14.2%.其中10个QTL与以前报道过的QTL的位置相近或重叠,而株高QTL(qPH04-01)是新发现的群体专一性的QTL,最靠近标记umc0371,表型变异贡献率为8.8%,是值得进一步研究和利用的位点.     

On the applicability of the “abt” concept

Kaiser's “abt” concept rests on the experimental establishment of a linear relation between band width at half height, b_0.5, and capacity ratio, k, according to His column specification quantity, h_real, is dependent on the square of the slope a, obtained from a linear regression analysis based on this relation. It is shown in the present paper that an improvement of the experimental conditions leading to a lower extra-column contribution to band broadening, b, introduces a tendency towards a negative curvature in the plot at low k values. The mean slope increases, and an uncritical linear regression would yield an h_real-value which is higher than before and which would be in the opposite direction to the requirements of a reliable column specification. Generally the linear regression analysis has to be moved to higher k regions in cases of curvature, especially as it is also shown that h_real is an estimation of the traditional HETP value, H∞, that would be obtained when k approaches infinity. This theoretically expected relation is a strong motivation for the use of h_real as a column specification, since the b_0.5-value associated with H∞ is expected to be practically independent of b.     

倾斜下降管气液两相分层流截面含气率的计算与液层高度的预测

分层流是气液两相流中常见的流动型式，分层流中液层高度是计算的基本数据，由于界面波的存在，对液层的测量和预测都很困难．Ｖｌａｃｈｏｓ提出了预测气液两相分层流液层厚度的关系式，但这一关系式并不适用于倾斜下降管气液两相流．本文提出了计算倾斜下降管气液两相分层流截面含气率的理论模型，在这种模型下得到的截面含气率和实验结果符合良好．在大量实验的基础上，考虑了倾角、管径、气液各相折算速度的影响，根据实验数据提出了预测液层厚度的关系式。     

引信用激光与加速度传感器复合定高技术

比较了不同类型的弹载定高体制,提出了脉冲激光与重力加速度传感器复合定高的定距原理,并对测距误差进行深入分析,得出其定高精度。对设计出的原理样机进行了实验测试,平台倾斜角度检测实验的结果表明,静态条件下最大角度误差小于0.3;0~500 m定高测试实验的结果表明,测量平均值与实际值最大误差为2.5 m,并且与目标距离无关。     

法兰锻坯成型高度的确定

分析了法兰锻件在胎模锻过程中金属质点流动规律,应用主应力法求得分流面位置来确定制坯高度,从而保证了锻件质量。     

Solid-phase epitaxy of CaSi2 on Si(1 1 1) and the Schottky-barrier height of CaSi2/Si(1 1 1)

Thin Ca films were evaporated on Si(1 1 1) under UHV conditions and subsequently annealed in the temperature range 200–650 °C. The interdiffusion of Ca and Si was examined by ex situ Auger depth profiling. In situ monitoring of the Si 2p core-level shift by X-ray photoemission spectroscopy (XPS) was employed to study the silicide formation process. The formation temperature of CaSi₂ films on Si(1 1 1) was found to be about 350 °C. Epitaxial growth takes place at T≥400 °C. The morphology of the films, measured by atomic force microscopy (AFM), was correlated with their crystallinity as analyzed by X-ray diffraction (XRD). According to measurements of temperature-dependent I–V characteristics and internal photoemission the Schottky-barrier height of CaSi₂ on Si(1 1 1) amounts to qΦ_Bn=0.25 eV on n-type and to qΦ_Bp=0.82 eV on p-type silicon.     

A study of random Weyl trees

We study binary search trees constructed from Weyl sequences {nθ}, n≥1, where θ is an irrational and {·} denotes “mod 1.” We explore various properties of the structure of these trees, and relate them to the continued fraction expansion of θ. If H_n is the height of the tree with n nodes when θ is chosen at random and uniformly on [0, 1], then we show that in probability, H_n∼(12/π²)log n log log n. © 1998 John Wiley & Sons, Inc. Random Struct. Alg., 12, 271–295, 1998     

基于InGaN/GaN多量子阱双波长发光二极管生长及发光性能

差分吸收激光雷达测量臭氧浓度过程中,云层信号会造成对流层臭氧浓度剧烈的抖动,带来了很大的测量误差.本文提出了一种云消除算法,该算法通过插值云层高度区域内的臭氧浓度,有效消除了对流层臭氧浓度的剧烈抖动.通过阐述其理论基础,给出了其算法关键点,即云信号的识别和云高度的精确定位.根据云层消光系数的特点,通过设定气溶胶消光系数阈值获取云层高度信息,利用累加平均有效减少噪音造成的测量误差.结果表明,在精确确定云高、云底的基础上,运用线性插值算法对臭氧测量结果进行修正,可以有效克服云层对测量结果造成的急剧起伏.