圆柱型正交各向异性圆形薄板的非线性非对称弯曲问题（Ⅱ）

本文利用“正则摄动法”［２］研究文献［１］中由“两变量法”［３］所得到的关于Ｗｎｍ，和的递推方程和递推边界条件的求解问题。求得了本问题的一致有效渐近解，最后作为实例，我们利用“混合摄动法”［４］研究了轴对称线性弯曲问题，并将所得结果与文献［５］中给出的精确解相比较，两者基本上是一致的。     

Theoretical analysis on waveform structures of pulse propagating in shallow water with an ideal thermocline

I.IntroductionDuetospatia1andtemporalvariabilityoftheocean-acousticenvironment,especially,theeffectsofboundaryaswel1asmediumonpropagationofacousticwavesinshal1owwater,theacousticpropagationisextrcmelycomp1icatcd.Multipathtransmissionisthebasiccharacteris-hcsofunderwatersoundchannels.Undctcrminedmultipathstructurescangreatlylimittheperformanceofunderwateracousticdetcction.However,ifthemultipathcharacteristicsofacousticpropagationinunderwatcrsoundchanne1sareknown,spaee-timeresolutionandpro-cess…     

Ar—Kr溶液扩散系数的分子动力学模拟及其与温度的关系

用分子动力学模拟方法研究确定Ａｒ－Ｋｒ溶液的自扩散系数Ｄ１、Ｄ２和互扩散系数Ｄ１２以及它们随温度变化的规律。结果表明，分别用Ｇｒｅｅｎ－Ｋｕｂｏ法和Ｅｉｎｓｔｅｉｎ法得到的扩散系数在数值上一致；该溶液的３种扩散系数均满足Ｄ＝Ｄ０ｅ＾Ｅ／ＲＴ关系。     

长余辉发光玻璃SrAl2O4∶Dy, Eu的制备与发光性能研究

在低熔点破璃中掺杂一定量的长余辉发光粉制备了性能优良的长余辉发光玻璃。在保证发光玻璃均匀透明的基础上，发光性能随发光粉掺杂量的增加而增强，尽量降低假烧温度和减少保温时间可以保持良好的发光性能，在还原气氛制备的发光玻璃性能优于在空气中制备的。煅烧工艺对发光玻璃的微观结构有显著的影响。     

Er~(3 ),Ho~(3 )和Tm~(3 )在硫氧化钆中的余辉发光

非放射性长余辉磷光粉作为美化和清洁光源在发光陶瓷、交通安全标志、紧急突发事件的照明设施、工艺美术涂料等众多领域得到越来越广泛的应用,引起人们的重视.到目前为止,文献报道的稀土长余辉磷光体的激活离子主要有铕离子(Eu3+和Eu2+[1-4]、三价铈离子(Ce3+)[5]、三价铽离子(Tb3+)[6]、三价镨离子(Pr3+)[7]、三价钐离子(Sm3+)[8].Ho3+,Er3+,Tm3+等稀土离子作为红外上转换发光材料的激活离子[9～12],而关于它们的长余辉发光的报道极少.最近,雷炳富等在Tm3+离子[13]激活的硫氧化钇体系中发现了长余辉发光.在此,我们通过高温固相法合成了Er3+,Ho3+和Tm3+掺杂的硫氧化钆长余辉磷光粉,观察到该体系中迄今未见文献报道的Er3+,Ho3+和Tm3+离子的长余辉发光.     

液芯光纤光度法在乙醇水溶液中测定铂(Ⅱ)、钛(Ⅳ)

采用氟塑料长光纤管，以４２％乙醇水溶液作液芯，组成液芯光纤，基于铂与氯化亚锡、钛与过氧化氢形成黄色络合物在乙醇水溶液中很稳定，拟定了测定铂、钛的液芯光纤光度法。该法灵敏度高，用 １ｍ长光纤作吸收池，铂的灵敏度为 ４． ８４５ Ａ／ｍｇ· Ｌ－１，钛的灵敏度为１．４１Ａ／ｍｇ· Ｌ－１（Ａ为吸光度），与常规法（１ｃｍ）比色皿相比灵敏度提高了 １００倍。该法测定了催化剂中铂，煤灰粉中钛，结果与推荐值相符。     

用两种方法合成长余辉发光玻璃的对比研究

在还原性气氛下高温固相反应法（一步法）合成了长余辉发光玻璃GA；用SrAl2O4:Eu,Dy荧光粉（SAED）与玻璃粉混合高温熔融（二步法）合成了长余辉发光玻璃GB和GC，通过XRD，发光光谱和磷光衰减曲线对样品进行了表征，荧光粉SAED和玻璃GA，GB，GC的发射峰值依次是525，493。462，516nm，发光强度和余辉时间都是SAED＞GC＞GB＞GA，玻璃的发射光谱峰随玻璃组成不同发生位移，两种发生合成的夜光玻璃发光性质存在明显的差异，同一合成方法下，玻璃基料决定着玻璃网络结构，同时也影响着夜光玻璃的发光性质。     

Dependence of Elution Curve and Adsorption Isotherms of Insulin on composition of Mobile Phase of Frontal Analysis in Reversed Phase Liquid Chromatography

With frontal analysis(FA),the dependence of adsorption isotherms of insulin on the composition of mobile phase in reversed phase liquid chromatography (RPLC) has been investigated,This is also a good example to employ the stoichiometric displacement theory (SDT) for ivestigating solute adsorption in physical chemistry.Six kinds of mobile phase in RPLC were employed to study the effects on the elution curves and adsorption isotherms of insulin.the key points of this paper are:(1) the stability of insulin due to delay time after preparing,the organic solvent concentration,the kind and the concentration of ion-pairing agent in mobile phase were found to affect both elution curve and adsorption isotherm very seriously.(2)To obtain a valid and comparable result,the composition of the mobile phase employed in FA must be as same as possible to that in usual RPLC of either analytical scale or preparative purpose.(3)Langmuir Equation and the SDT were employed to imitate these obtained adsorption isotherms.The expression for solute adsorption from solution of the SDT was found to have a better elucidation to the insulin adsorption from mobile phase in RPLC.     

Measurement of the sign and the magnitude of heteronuclear coupling constants from spin-state-edited J-cross-polarization NMR experiments

New spin-state-selective (S3) NMR pulse sequences exclusively applying cross-polarization schemes to achieve optimum homonuclear and heteronuclear 1H-X coherence transfer are reported for the simple and accurate measurement of the magnitude and sign of heteronuclear coupling constants for samples at natural abundance. The proposed spin-edited HCP-TOCSY experiments are based on clean heteronuclear S3 excitation, generated by simultaneous co-addition of two independent in-phase and anti-phase components created during the mixing heteronuclear J-cross-polarization (HCP) step, which is finally transferred to other protons by a conventional homonuclear TOCSY mechanism. Selective 1D and non-selective 2D approaches for the easy determination of long-range proton-carbon and proton-nitrogen coupling constants on any protonated and non-protonated heteronuclei are presented and discussed for several organic molecules.     

Model studies of the chemisorption of hydrogen and oxygen on nickel surfaces

Atomic chemisorption of hydrogen and oxygen on the Ni(100) surface has been studied using an Effective Core Potential (ECP) approach described in a previous paper. Clusters of up to 50 nickel atoms have been used to model the surface. The computed chemisorption energies are 62 kcal/mol (exp. 63 kcal/mol) for hydrogen and 106 kcal/mol (exp. 115–130 kcal/mol) for oxygen. Correlating the adsorbate and the cluster-adsorbate bonds is extremely important for obtaining accceptable results, particularly for oxygen. Reasonable convergence of chemisorption energies is obtained with 40–50 cluster atoms for both hydrogen and oxygen. For hydrogen the addition of a third cluster layer stabilizes the results considerably. Both hydrogen and oxygen are adsorbed at (or close to) the four-fold hollow site. The calculated barriers for surface migration are also in good agreement with the experimental estimates. The calculated equilibrium heights above the surface are on the other hand too high compared with experiments. This disagreement is believed to be due to core-valence correlation effects, which are not incorporated in the present ECP. The cluster convergence for the height above the surface is much slower than for the chemisorption energy.