Load-Carrying Capacity of Circular Plates Made of a Fiber-Reinforced Composite

The load-carrying capacity of circular plates made of a fiber-reinforced composite and loaded with axisymmetric transverse forces under axisymmetric boundary conditions is investigated. The plates can be freely supported or clamped along their contour. To the known yield condition used, in the plane of main bending moments, there correspond irregular hexagons, which depend on the mechanical properties of composite constituents and some characteristic geometrical parameters. It is shown that, depending on the ratio of ultimate radial and circumferential bending moments, in the plastic state, the circular plates (the central part of the clamped plates) take the form of a cone or a frustum of cone. For each of the cases, the limit load is found, which is a function of the above-mentioned mechanical parameters. The statically allowable fields of bending moments and the corresponding allowable fields of deflection rates are determined. The solutions found are exact. Special cases for the freely supported plates are analyzed, and the results obtained are presented in the form of graphs.__________Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 2, pp. 177–192, March–April, 2005.     

中国的少数民族与野生动物保护

本文收集了我国各省主要珍稀野生动物(国家一、二级野生动物)的分布状况以及少数民族地区内民族的分布状况．通过地理信息系统软件Arcview 3.2绘制成图，通过绘制的中国主要珍贵濒危动物分布图、权重后的珍惜野生动物分布图，以及中国少数民族自治地区(州、县)的民族分布图，可以看出在民族成份聚集的边疆省份，其野生动物资源也相应较多．文章最后还论述了少数民族地区的各族人民保护和利用野生动物资源的重要性．     

Level of nodes in increasing trees revisited

Simply generated families of trees are described by the equation T(z) = ϕ(T(z)) for their generating function. If a tree has n nodes, we say that it is increasing if each node has a label ∈ { 1,…,n}, no label occurs twice, and whenever we proceed from the root to a leaf, the labels are increasing. This leads to the concept of simple families of increasing trees. Three such families are especially important: recursive trees, heap ordered trees, and binary increasing trees. They belong to the subclass of very simple families of increasing trees, which can be characterized in 3 different ways. This paper contains results about these families as well as about polynomial families (the function ϕ(u) is just a polynomial). The random variable of interest is the level of the node (labelled) j, in random trees of size n ≥ j. For very simple families, this is independent of n, and the limiting distribution is Gaussian. For polynomial families, we can prove this as well for j,n → ∞ such that n − j is fixed. Additional results are also given. These results follow from the study of certain trivariate generating functions and Hwang's quasi power theorem. They unify and extend earlier results by Devroye, Mahmoud, and others. © 2007 Wiley Periodicals, Inc. Random Struct. Alg., 2007     

Effect of a Shock Pulse on a Floating Ice Sheet

The vibrations of a viscoelastic plate lying on an elastic liquid base subjected to pulse loading have been studied theoretically and experimentally. The effect of the variable depth of the reservoir, plate thickness, and strain relaxation time on the value of the plate vibration amplitude and the length and curvature of the flexural gravity wave profile are analyzed. Good agreement of theoretical and experimental results is obtained.     

Characterization of Metallo Bis(terpyridine) Diblock Polymers by Nonaqueous Capillary Zone Electrophoresis

A method of nonaqueous capillary zone electrophoresis (CZE) has been developed to characterize block (co)polymers of poly(ethylene oxide) and poly(styrene) containing metallo bis(terpyridine) complexes as bridging units. Specific CZE separation conditions had to be applied, with barium perchlorate dissolved in N-methylformamide (NMF) as background electrolyte and OV-1701-OH deactivated capillaries. For detection UV absorption was measured at a wavelength of 316 nm. Metallo diblock polymers with molecular weights up to 30,000 Da could be analyzed by the proposed nonaqueous CZE method. Experiments performed with polymeric compounds containing Fe, Ni or Ru as central metal ions showed that their electrophoretic mobilities were independent of the type of metal ion. Therefore, the data on the size of the polymeric compounds could be obtained using just one set of calibration standards. Polydispersities of the samples calculated from the experimental results were in correlation with the polydispersities of the polymers used in the synthesis of the metallo diblock polymers. Several polymeric samples contained metallo mono(terpyridine) complexes as impurities. These by-products could be separated from the main product. With symmetrical diblock polymers only one by-product was detected, while with an asymmetric diblock polymer two types of mono-complexes were found. The amount of the mono-complexes present as impurities was dependent on the type of central metal ion (Ni > Fe >> Ru).     

On‐line Determination of Particle Size Distributions in Flowing Dispersions

Emulsions are of great importance to industry. They are involved in many engineering operations, including chemical reactions, extraction, emulsification and suspension polymerization, etc. However, an important problem for these processes is how to control the size distribution of the dispersed phase. Indeed, off‐line analysis of the emulsion may generate uncertainties due to sampling and dilution of the product, which are likely to change the dispersion state and physico‐chemical properties. In this work, an on‐line optical method is proposed to characterize dispersed media in real flowing conditions. This method is based on the time‐analysis of back‐scattered light fluctuations. The present paper deals with the development of this method and its application to dispersions of alumina in water. The results obtained with the on‐line optical method are compared with those acquired by classical laser light scattering and microscopy.     

Zeroth-order phase transitions and Zipf law quantization

From the standpoint of thermodynamic averaging of fission microprocesses, we investigate the origin of radioactive release in an NPP after an accident or after resource depletion. The genesis of the NPP release is interpreted as a new thermodynamic phenomenon, a zeroth-order phase transition. This problem setting results in a problem in probabilistic number theory. We prove the corresponding theorem leading to quantization of the Zipf law for the frequency of a zeroth-order phase transition with different values of the jump of the Gibbs thermodynamic potential. We introduce the notion of hole dimension. __________ Translated from Teoreticheskaya i Matematicheskaya Fizika, Vol. 150, No. 1, pp. 118–142, January, 2007.     

集中荷载下叠合梁抗剪强度

本文对低叠合面钢筋破简支在合梁二阶段受力的斜截面抗剪性能进行了试验研究，并运用非线性有限元分析和试验实测数据，得出了一个适合于集中荷载下高低叠合面叠合梁的抗剪强度计算公式．     

系综分布和它的小涨落近似

由“从正则分布出发，在小涨落近似下得出的能量涨落分布公式”求得的能量涨落的二次矩与直接由正则分布求得的二次矩完全相同，但分别由二求得的高次矩并不完全相同。     

复合多层介质在可变温度和集中荷载作用下的位移和应力

研究了多层介质中的热弹性位移和应力.多层介质具有不同厚度,各层又具有不同的弹性性质,最上层表面上作用热荷载和集中荷载.假设各层分别是均匀、各向同性弹性材料,各层相关的位移分量是轴对称的,对称轴为各层表面的垂线.因此,各层应力函数满足无体力的单一方程.利用积分变换法求解了该方程,对由任意多个层数构造的多层介质,给出了其相应层数基础热弹性位移和应力的解析表达式.并对3层介质和4层介质时的数值结果进行了比较.