Influence of the Li⋅⋅⋅π Interaction on the H/X⋅⋅⋅π Interactions in HOLi⋅⋅⋅C6H6⋅⋅⋅HOX/XOH (X=F,Cl, Br,I) Complexes

The influences of the Li???π interaction of C₆H₆???LiOH on the H???π interaction of C₆H₆???HOX (X=F, Cl, Br, I) and the X???π interaction of C₆H₆???XOH (X=Cl, Br, I) are investigated by means of full electronic second‐order Møller–Plesset perturbation theory calculations and “quantum theory of atoms in molecules” (QTAIM) studies. The binding energies, binding distances, infrared vibrational frequencies, and electron densities at the bond critical points (BCPs) of the hydrogen bonds and halogen bonds prove that the addition of the Li???π interaction to benzene weakens the H???π and X???π interactions. The influences of the Li???π interaction on H???π interactions are greater than those on X???π interactions; the influences of the H???π interactions on the Li???π interaction are greater than X???π interactions on Li???π interaction. The greater the influence of Li???π interaction on H/X???π interactions, the greater the influences of H/X???π interactions on Li???π interaction. QTAIM studies show that the intermolecular interactions of C₆H₆???HOX and C₆H₆???XOH are mainly of the π type. The electron densities at the BCPs of hydrogen bonds and halogen bonds decrease on going from bimolecular complexes to termolecular complexes, and the π‐electron densities at the BCPs show the same pattern. Natural bond orbital analyses show that the Li???π interaction reduces electron transfer from C₆H₆ to HOX and XOH.     

碳和石墨烯对磷酸锰锂材料性能的影响

在采用溶剂热法制备磷酸锰锂的基础上,以蔗糖和石墨烯为碳源,制备了裂解碳和石墨烯含量不同的磷酸锰锂/碳/石墨烯复合材料,研究了裂解碳和石墨烯对材料性能的影响。采用扫描电镜（SEM）和透射电镜（TEM）对材料的形貌进行了表征。裂解碳包覆可以提高LiMnPO₄纳米片表面的电子导电性,对于材料性能的改善起到主要的作用;石墨烯可以提高纳米片之间的电子和离子导电性,改善材料的电化学性能。电化学测试表明,当裂解碳含量为4%、石墨烯含量为2%时,LiMnPO₄电极具有较好的电化学性能,在0.5C下的放电比容量为139.1 mAh·g^-1,循环100次后,容量保持率为93.6%。与添加单一碳和单一石墨烯的LiMnPO₄电极相比,该电极在0.5C下的放电比容量分别提高了35.0%和48.6%。     

MoO42-取代对Nasicon型Li3Fe2(PO4)3正极材料电化学性能的影响

以MoO₄^2-部分取代Li₃Fe₂（PO₄）₃中的PO₄^3-,研究表明：加入的MoO₄^2-离子主要以固溶形式存在于Li₃Fe₂（PO₄）₃中,起到了显著改善其电化学性能的作用。其中,MoO₄^2-掺杂浓度为0.3的样品表现出最佳的电化学性能,其在0.5C倍率下的首次放电容量为113.7 mAh·g^-1,这一数值比未掺杂的提高了20.7%;经过60次循环充放电,容量保持率为94%。将放电倍率从0.5C逐步增大至5C,再降至初始的0.5C,并在每个倍率循环10次,这一材料的最终放电容量可达首次0.5C的95%。这些优异的性能应归因于MoO₄^2-掺杂使材料的氧化还原能力增强,氧化还原电对的电势差减小,电池内部的电荷转移电阻减小,以及Li⁺扩散系数增加。     

EDTA辅助水热法制备性能优异的棒状LiFePO4/C材料

以乙二胺四乙酸为配位剂采用水热法制备了棒状LiFePO₄/C材料。采用X射线衍射、扫描电镜、透射电镜、循环伏安、交流阻抗和恒电流充放电测试等对材料进行表征。结果表明:乙二胺四乙酸对材料的形貌和电性能均有很大影响。通过加入乙二胺四乙酸, 材料的形貌由不规则的颗粒变为棒状的颗粒且颗粒的厚度由140~200 nm减少至40~90 nm, 材料的表面包覆约3.5 nm的均匀碳层, 且该材料极化较小且界面阻抗较低。0.1C放电比容量为167 mAh·g^-1(接近理论容量170 mAh·g^-1)。     

层状钛硅酸盐化合物作为锂离子电池负极储能材料

锂离子二次电池是手提设备的重要电力来源。近年来, 人们为了寻找更新颖更好的锂离子电极材料, 开始研究晶形离子交换材料, 这种材料具有开放孔道, 能够让离子在多孔框架里自由的进出。一种具有层状结构的钛硅酸盐Na-JDF-L1(Na₄Ti₂Si₈O₂₂·4H₂O)经过离子交换后被用作锂离子负极材料。它在循环200次后放电容量保持在364 mAh·g^-1, 并且库伦效率约为100%。通过将TiO₂引入Li(Na)-JDF-L1中, 有效的提高了材料的首次库伦效率和倍率放电性能。     

Lithium bromide as an efficient,green, and inexpensive catalyst for the synthesis of quinoxaline derivatives at room temperature

Abstract

An efficient, simple, and green procedure for the synthesis of quinoxaline derivatives is described. The condensation of 1,2-diamines with 1,2-diketones using lithium bromide (LiBr) in H₂O/EtOH as a green reaction media at room temperature affords the title compounds in high to excellent yields and in short reaction times.     

Synthesis of 2,3-dihydro-1H-isoindole-1-thiones via the bromine–lithium exchange between 1-bromo-2-(1-isothiocyanatoalkyl)benzenes and butyllithium

The reaction of 1-bromo-2-(1-isothiocyanatoalkyl)benzenes, which are easily derived from 2-bromophenyl ketones or (2-bromophenyl)methanamine, with butyllithium generates 1-(1-isothiocyanatoalkyl)-2-lithiobenzenes, which immediately underwent intramolecular cyclization to give rise to the corresponding 3-substituted and 3,3-disubstituted 2,3-dihydro-1H-isoindole-1-thiones in good yields.