Catalysis in Organic Solvents with Lipase Immobilized by Sol-Gel Technique

A series of immobilized lipases were obtained by sol-gel process, using silica prepolymers prepared from tetramethoxysilane, methyltrimethoxysilane, propyltrimethoxysilane and (3-aminopropyl)triethoxysilane. The activities of these biocatalysts were compared with the lipase adsorbed on poly(methylhydroxysiloxane) and encapsulated into a silicone rubber, lipase entrapped in nanoporous silica matrix and commercial sol-gel lipase. Model reactions were the esterification of stearic acid and Corey lactone bisalcohol (an intermediate of prostaglandin synthesis). The positive effect of hydrophobic-hydrophilic interface, created by the addition of organosilanes, on the activity of biocatalysts was partially reduced by decreasing specific surface of mesopores. Hydrophobic solvents increased the activity of the lipase entrapped in tetramethoxysilane–methyltrimethoxysilane prepolymer in the sequence acetone < toluene < benzene < decane < hexane. The activity of silicone rubber-encapsulated biocatalysts was proportional to polymer swelling in organic solvents (hexane > toluene > acetone).     

DM-130大孔树脂固定脂肪酶的研究

采用DM-130大孔树脂为载体，对脂肪酶进行了固定化，研究了固定化条件对催化活性的影响，得到了最佳固定化条件：温度为45℃，pH值为8.0，吸附时间为6h，载体与脂肪酶的质量比为30：1。     

双液相反应体系中脂肪酶催化拆分缩水甘油酯

利用脂肪酶作为催化剂在双液相反应体系中对外消旋缩水甘油酯进行立体选择性的酯水解反应. 考察了影响该拆分反应的因素， 确定了最适酶源为猪胰脂肪酶； 最适底物为缩水甘油丁酯； 其它最适反应条件： pH为7.6； 温度为27 ℃； 反应时间为4 h. 在最适 条件下， 当酶促拆分反应的转化率为60.6%时， 缩水甘油丁酯的光学纯度可以达到93.3%以 上.     

产碱性脂肪酶酵母菌的分离与鉴定

从成都龙泉果园采集的160份土壤样品中，通过观察油脂平板上水解圈直径与菌落直径的大小之比(D／d)，分离到12株产碱性脂肪酶的真菌，采用滴定法测液体培养物酶活进行复筛，获得一株产酶活性最高的酵母菌，通过对该酵母菌进行形态、生理生化特征的观察与测试，初步鉴定为胶淀粉假丝酵母，命名为Candida amylolenta L-30。     

Polycondensation of Sebacic Acid with Primary and Secondary Hydroxyl Groups Containing Diols Catalyzed by Candida antarctica Lipase B

Abstract

The aliphatic polyesters are normally synthesized by ester interchange reactions or direct esterification of hydroxyacids or diacid/diol combinations. Biotransformation, utilizing the enzymes as catalysts, was accepted as an alternative route for the synthesis of aliphatic polyesters and offers various advantages compared with the conventional, metal-catalyzed polymerization reactions. Previous studies indicated that lipase-catalyzed polycondensation reactions between diols and diacids occurred preferentially at primary hydroxyl groups of diols, when diols contained both primary and secondary hydroxyl groups. In this work, we investigated lipase-catalyzed polycondensation of diacids and secondary hydroxyl group–containing diols, and successfully synthesized polyesters by polycondensation with secondary hydroxyl groups as well as primary hydroxyl groups. Various diols, glycerol, 1,2-propanediol, 1,3-butanediol, 2,3-butanediol, and 2,4-pentanediol were tested for the polycondensation. The polymerization was achieved by heating a mixture of lipase B, sebacic acid, and the diols in anhydrous toluene at 100 °C for 72 h. The resulting polymers were characterized by ¹H and ¹³C NMR spectroscopy, Fourier transform–infrared spectroscopy, thermogravimetric analysis, and gel permeation chromatography.     

Lipase biosensor for tributyrin and pesticide detection

Potentiometric biosensors based on Candida rugosa lipase was described for the detection of organophosphorus pesticide; methyl-parathion and tributyrin. Lipase was immobilized on the glass electrode by means of a gelatin membrane, which is then cross-linked with glutaraldehyde. The principle of the biosensor is based on the measurement of pH variation which was recorded in millivolts due to the enzymatic hydrolysis of tributyrin to butyric acid. For the inhibitor detection, biosensor responses were measured after pesticide treatment, which caused a drop in enzyme activity because of the irreversible inhibition. Reactivation conditions of the reused enzyme electrodes were also investigated by pyridine-2-aldoxime methiodide (2-PAM). The limit of detection for tributyrin was estimated as 93?µM for lipase sensor within the linear range of 65–455?µM.     

Immobilization of Eversa® Transform via CLEA Technology Converts It in a Suitable Biocatalyst for Biolubricant Production Using Waste Cooking Oil

The performance of the previously optimized magnetic cross-linked enzyme aggregate of Eversa (Eversa-mCLEA) in the enzymatic synthesis of biolubricants by transesterification of waste cooking oil (WCO) with different alcohols has been evaluated. Eversa-mCLEA showed good activities using these alcohols, reaching a transesterification activity with isoamyl alcohol around 10-fold higher than with methanol. Yields of isoamyl fatty acid ester synthesis were similar using WCO or refined oil, confirming that this biocatalyst could be utilized to transform this residue into a valuable product. The effects of WCO/isoamyl alcohol molar ratio and enzyme load on the synthesis of biolubricant were also investigated. A maximum yield of around 90 wt.% was reached after 72 h of reaction using an enzyme load of 12 esterification units/g oil and a WCO/alcohol molar ratio of 1:6 in a solvent-free system. At the same conditions, the liquid Eversa yielded a maximum ester yield of only 34%. This study demonstrated the great changes in the enzyme properties that can be derived from a proper immobilization system. Moreover, it also shows the potential of WCO as a feedstock for the production of isoamyl fatty acid esters, which are potential candidates as biolubricants.     

Microwave-Assisted One-Pot Lipid Extraction and Glycolipid Production from Oleaginous Yeast Saitozyma podzolica in Sugar Alcohol-Based Media

Glycolipids are non-ionic surfactants occurring in numerous products of daily life. Due to their surface-activity, emulsifying properties, and foaming abilities, they can be applied in food, cosmetics, and pharmaceuticals. Enzymatic synthesis of glycolipids based on carbohydrates and free fatty acids or esters is often catalyzed using certain acyltransferases in reaction media of low water activity, e.g., organic solvents or notably Deep Eutectic Systems (DESs). Existing reports describing integrated processes for glycolipid production from renewables use many reaction steps, therefore this study aims at simplifying the procedure. By using microwave dielectric heating, DESs preparation was first accelerated considerably. A comparative study revealed a preparation time on average 16-fold faster than the conventional heating method in an incubator. Furthermore, lipids from robust oleaginous yeast biomass were successfully extracted up to 70% without using the pre-treatment method for cell disruption, limiting logically the energy input necessary for such process. Acidified DESs consisting of either xylitol or sorbitol and choline chloride mediated the one-pot process, allowing subsequent conversion of the lipids into mono-acylated palmitate, oleate, linoleate, and stearate sugar alcohol esters. Thus, we show strong evidence that addition of immobilized Candida antarctica Lipase B (Novozym 435^®), in acidified DES mixture, enables a simplified and fast glycolipid synthesis using directly oleaginous yeast biomass.     

酶促棕榈酸鲸蜡酯合成的底物抑制作用

对实验室自制的固定化Candida sp. 99-125脂肪酶在正己烷中催化棕榈酸和鲸蜡醇的酯化反应的动力学机制进行了初步研究,结果表明：反应为动力学控制,不存在扩散限制,底物浓度对反应速率的影响符合Ping-Pong Bi-Bi反应机制。但在不同的底物浓度范围内存在不同程度的底物抑制作用,其中以长链醇的抑制为主。本文根据底物浓度由低到高,划分了三个底物浓度范围,在不同的范围内分别研究了两个底物的抑制作用,并选择不同的动力学模型,求得了动力学常数。     

Investigation of the Impact of Water on the Enantioselectivity Displayed by CALB in the Kinetic Resolution of δ‐Functionalized Alkan‐2‐ol Derivatives

It is shown that the low enantioselectivity of Candida antarctica lipase B (CALB)‐catalyzed transesterification of a δ‐functionalized alkan‐2‐ol to its acetate does not correlate at all with the high enantioselectivity of the CALB‐catalyzed hydrolysis of the corresponding acetate in water. This lack of correlation is unusual and for unfunctionalized alkan‐2‐ol derivatives there is a very good correlation between the enantioselectivity of transesterification of the alcohol and hydrolysis of the corresponding acetate (E>200 in both cases). The results confirm previous predictions from molecular modeling. The water effect was mimicked by CALB variant Ala281Ser, which showed an enhanced enantioselectivity in transesterification of δ‐functionalized alkan‐2‐ols compared to wild‐type CALB.