Generic applications of 13C‐detected NMR diffusion to formulated systems with suppression of thermal convection induced by proton decoupling

Fast and effective structural/compositional analysis on formulated systems represents one of the major challenges encountered in analytical science. ¹³C‐detected diffusion represents a promising tool to tackle the aforementioned challenges, particularly in industry. Toward exploring the generic applications of ¹³C‐detected diffusion, thermal convection induced by ¹H decoupling has been identified as a key factor that resulted in significantly reduced resolution in the diffusion dimension. Optimization of experimental parameters and utilization of double‐stimulated echo‐based pulse sequence both can effectively suppress the thermal convection caused by the ¹H decoupling, the success of which allows robust and generic applications of ¹³C‐detected diffusion to systems from mixtures of small molecules, polymer blends, and copolymers to actual complex formulated systems. The method is particularly powerful in differentiating small molecules from polymers, polymer blends from copolymers, and end‐group analysis. Copyright © 2016 John Wiley & Sons, Ltd.     

复合土工膜不同锚固方式的力学特性对比研究

复合土工膜作为一种新型的防渗结构体应用于堆石坝工程，效果突出，但是在土工膜的锚固处容易产生应力集中，出现“端部固定效应”．本文结合国外某工程实例，应用商业软件FLAC3D，采用三维显式有限差分法分别对不同锚固方式情况下复合土工膜的应力、变形进行计算分析．结果表明，采用不同的土工膜锚固方式对其受力有一定的影响，在实际工程中，应采用合适的复合土工膜锚固方式改善土工膜的受力状态，减小“端部固定效应”的影响     

25Hz微电子交流计数站内电码化调试存在问题分析

分析了微电子交流计数站内电码化在车出清区段后不能自动复原的问题,探讨了解决问题的方案,并提出了在受端发码时受端发码电源的调试范围。     

Singly Periodic Solutions of the Allen-Cahn Equation and the Toda Lattice

The Allen-Cahn equation ? Δu = u ? u ³ in ?² has family of trivial singly periodic solutions that come from the one dimensional periodic solutions of the problem ?u″ =u ? u ³. In this paper we construct a non-trivial family of singly periodic solutions to the Allen-Cahn equation. Our construction relies on the connection between this equation and the infinite Toda lattice. We show that for each one-soliton solution to the infinite Toda lattice we can find a singly periodic solution to the Allen-Cahn equation, such that its level set is close to the scaled one-soliton. The solutions we construct are analogues of the family of Riemann minimal surfaces in ?³.     

Nitroxide‐mediated Living Radical Polymerization of Styrene with Fluorescent Initiator

A fluorescence method was used for determination of marked chain ends in polystyrene samples prepared by 4‐substituted TEMPO type nitroxide‐mediated living free radical polymerization of styrene. 2,2,6,6‐Tetramethyl‐1‐(1‐phenylethoxy)‐piperidin‐4‐yl‐4‐pyren‐1‐ylbutanoate (PYNOR) was prepared and used as an unimolecular initiator bearing pyrene as a fluorescence mark on mediating nitroxide fragment. The bulk polymerization of styrene at 120°C, in the presence of new unimolecular initiator, was a typical nitroxide mediated living radical polymerization. For comparison, two different molar ratios of initiator and monomer (1∶400 and 1∶1000 initiator ‐ monomer [I:M]) were used for polymerization. When I:M=1∶400, the obtained polydispersity was 1.12 and maximum molecular weight 27,000 g/mol was obtained at 62% conversion. For ratio 1∶1000, slightly higher polydispersity was obtained ?1.26 and the molecular weight was 53,000 g/mol at 70% conversion. The content of the polystyrene chains bearing mediating nitroxide fragment was determined by fluorescence spectroscopy. The intensity of pyrene fluorescence decreased as the molar mass, and the conversion increased as well. The extent of the incorporation of chromophore at propagating chain end or “livingness” of polymerization decreased despite the fact that the polydispersity did not change. The extent of side reaction leading to broadening of polydispersity is suppressed due to the high viscosity of the system at higher conversion. A low extent of “livingness” will have a very negative effect on possible preparation of block copolymers.     

Elastomeric Properties of Polysiloxane Networks. Bimodal Elastomers that are Spatially Inhomogeneous and Others that are Very Broadly Multimodal

End‐linking poly(dimethylsiloxane) was used to prepare bimodal elastomers networks so as to have inhomogeneous nanostructures, and also to prepare others having very broadly multimodal chain‐length distributions. Macroscopic phase separation, probably high crosslink density clusters, was observed to occur in some of the bimodal networks. The mechanical properties in simple extension and in equilibrium swelling were measured. The bimodal elastomers that were not obviously inhomogeneous showed very good mechanical properties, but the macroscopically phase‐separated networks, and the broadly multimodal network were weak. Analysis of the Mooney‐Rivlin profiles suggests that the reinforcing mechanism could have a structural component in addition to that from the limited extensibilities of the short chains. The mechanical properties and the extents of swelling support the cluster conjecture, in accord with previous morphological studies on spatially‐inhomogeneous polysiloxane elastomers.     

Preparation of Methyl 6‐O‐p‐Nitrobenzoyl‐β‐d‐Glucoside

Methyl 6‐O‐p‐nitrobenzoyl‐β‐d‐glucoside was synthesized by reacting methyl 4,6‐O‐p‐nitrobenzylidine‐β‐d‐glucoside with N‐bromosuccinimide (NBS). First, methyl β‐d‐glucoside was converted into methyl 4,6‐O‐p‐nitrobenzylidine‐β‐d‐glucoside with p‐nitrobenzaldehyde. Later, methyl 4,6‐O‐p‐nitrobenzylidine‐β‐d‐glucoside was opened oxidatively with NBS to give methyl 6‐O‐p‐nitrobenzoyl‐β‐d‐glucoside.     

Genotyping of exons 1 to 20 in Duchenne muscular dystrophy by universal multiplex PCR and short‐end capillary electrophoresis

One rapid CE method was established to diagnose Duchenne muscular dystrophy (DMD). DMD is a severe recessive inherited disorder frequently caused by gene deletions. Among them, exons 1–20 account for nearly 30% of occurrences. In this study, the universal multiplex PCR was used to enhance the fluorescently labeling efficiency, which was performed only by one universal fluorescent primer. After PCR, a short‐end injection CE (short‐end CE) speeded up the genotyping of the DMD gene. This method involved no extra purification, and was completed within 9 min. The CE conditions contained a polymer solution of 1.5% hydroxylethylcellulose in 1× TBE buffer at 6 kV for separation. This method was applied to test six DMD patients and one healthy male person. The results showed good agreement with those of multiplex ligation‐dependent probe amplification. This method can be applied for clinical diagnosis of DMD disease. Accurate diagnosis of the DMD gene is the best way to prevent the disease.     

Delocalized \begin{document}$\pi_3^6$\end{document} Bond in OX\begin{document}$_2$\end{document} (X=Halogen) Molecules

OX\begin{document}$_2$\end{document} (X=halogen) molecules was studied theoretically. Calculation results show that delocalized \begin{document}$\pi_3^6$\end{document} bonds exist in their electronic structures and O atoms adopt the sp\begin{document}$^2$\end{document} type of hybridization, which violates the prediction of the valence shell electron pair repulsion theory of sp\begin{document}$^3$\end{document} type. Delocalization stabilization energy is proposed to measure the contribution of delocalized \begin{document}$\pi_3^6$\end{document} bond to energy decrease and proves to bring extra-stability to the molecule. These phenomena can be summarized as a kind of coordinating effect.     

Enhanced Crystal Quality of Perovskite via Protonated Graphitic Carbon Nitride Added in Carbon-Based Perovskite Solar Cells

The quality of perovskite layers has a great impact on the performance of perovskite solar cells (PSCs). However, defects and related trap sites are generated inevitably in the solution-processed polycrystalline perovskite films. It is meaningful to reduce and passivate the defect states by incorporating additive into the perovskite layer to improve perovskite crystallization. Here an environmental friendly 2D nanomaterial protonated graphitic carbon nitride (p-g-C\begin{document}$_3$\end{document}N\begin{document}$_4$\end{document}) was successfully synthesized and doped into perovskite layer of carbon-based PSCs. The addition of p-g-C\begin{document}$_3$\end{document}N\begin{document}$_4$\end{document} into perovskite precursor solution not only adjusts nucleation and growth rate of methylammonium lead tri-iodide (MAPbI\begin{document}$_3$\end{document}) crystal for obtaining flat perovskite surface with larger grain size, but also reduces intrinsic defects of perovskite layer. It is found that the p-g-C\begin{document}$_3$\end{document}N\begin{document}$_4$\end{document} locates at the perovskite core, and the active groups -NH\begin{document}$_2$\end{document}/NH\begin{document}$_3$\end{document} and NH have a hydrogen bond strengthening, which effectively passivates electron traps and enhances the crystal quality of perovskite. As a result, a higher power conversion efficiency of 6.61% is achieved, compared with that doped with g-C\begin{document}$_3$\end{document}N\begin{document}$_4$\end{document} (5.93%) and undoped one (4.48%). This work demonstrates a simple method to modify the perovskite film by doping new modified additives and develops a low-cost preparation for carbon-based PSCs.