基于RFW102的低功耗无线数字收发电路

利用RFW102无线收发芯片,选择合适的微控制器,设计出工作在2.4GHz的无线数字收发电路.并以AD7416温度测量元件为例,简单介绍了此无线收发电路在无线传感器中的应用.与有线方式比较,具有可靠性高、安装容易、重复使用性和系统维护性好等优点.     

聚异丁烯高活性端基含量及相对分子质量测定方法的研究

综合使用核磁，VPO和近红外光谱分析技术对聚异丁烯活性端基含量以及相对分子质量的测定进行了详细研究，分别建立核测定聚异丁烯活性端基含量以及其他烯键含量和近红外光谱快速测量聚异聚丁烯活性端基含量。其他烯键含量和相对分子质量的分析方法。成对t检验结果表明，近红外光谱分析方法测定结果与核磁和VPO方法测定结果之间无显著性差异。     

黑格尔审美话语的政治性

黑格尔美学理论的表述形式由于时间潮流的冲刷而渐渐风化,这是我们面对黑格尔美学理论的困境。为了应对这一难题,我们试图采用话语表述策略来还原黑格尔的审美世界,从而初步证明审美的理论世界能够而且应该从政治性话语世界汲取能量和活力这一观点。     

建筑卷扬机卷筒端侧板强度的理论分析与试验研究

本文依据理论分析、光弹性试验、电测试验并经数学拟合,建立了卷扬机卷筒端侧板强度计算公式.     

The interlace polynomial of a graph

Motivated by circle graphs, and the enumeration of Euler circuits, we define a one-variable “interlace polynomial” for any graph. The polynomial satisfies a beautiful and unexpected reduction relation, quite different from the cut and fuse reduction characterizing the Tutte polynomial.It emerges that the interlace graph polynomial may be viewed as a special case of the Martin polynomial of an isotropic system, which underlies its connections with the circuit partition polynomial and the Kauffman brackets of a link diagram. The graph polynomial, in addition to being perhaps more broadly accessible than the Martin polynomial for isotropic systems, also has a two-variable generalization that is unknown for the Martin polynomial. We consider extremal properties of the interlace polynomial, its values for various special graphs, and evaluations which relate to basic graph properties such as the component and independence numbers.     

末端炔烃与亚铜离子反应的实验研究

研究了乙炔亚铜的电子吸收光谱，探讨了末端炔烃和亚酮离子的反应条件，生成物的稳定性和炔亚铜的组成，研究结果表明，末端炔烃的活泼性与介质中氨的含量密切相关，在ｃ（ＮＨ３．Ｈ２Ｏ）／ｃ（Ｃｕ＾＋）摩尔比为２７０～９００的范围内，反应活性最大，易与亚铜离子反应生成炔亚铅，红色乙炔亚铜的组成为ＣｕＣ≡ＣＣｕ，它在含有羟胺的氨性介质中很稳定，不受空气中氧的影响，这些结构为利用生成炔亚铜的以应来鉴定混合气中微笑     

Study on End Milling Generation Surface Model and Simulation in View of Main Axle s Tolerance

In accordance with the relative movement between end-milling cutter and workpiece surface, a theoretical generation model for milled surface was established with the movement error of principal axle considered. Then the milled surfaces under various cutting condition were simulated, the results of which showed that end milled surfaces were of “vaulted profile“, heights of surface irregularty at various points to be different with maximum value in the middle and smaller at both sides, the difference were ...     

动力总成悬置支架拓扑优化研究

采用结构拓扑优化方法,对动力总成悬置支架进行了优化.在最优拓扑结构的基础上进行结构修改后,一阶固有频率明显提高,而重量有所减小.从加强筋的优化结果来看,在平行于一阶弯曲振型方向上布置加强筋,可获得较好的效果.研究表明,在产品的概念设计阶段采用拓扑优化方法,能给产品的详细设计提供一个很好的基础.     

Comparison of the sensitivity of 11 crosslinked hyaluronic acid gels to bovine testis hyaluronidase

Crosslinked hyaluronan gels are used in various applications where their stability is a prerequisite. The sensitivity of such gels to hyaluronidase can be determined as an index of stability by several approaches: chromatography, electrophoresis, and viscometry. We describe here a test based on the colorimetric determination of the N-acetyl-d-glucosamine released by hyaluronidase in standardized conditions. The sensitivities to bovine testicular hyaluronidase of 11 different gels used to fill skin wrinkles (Restylane; Perlane; Juvéderm 18, 24, 24HV, 30, and 30HV; Surgiderm 18, 24XP, 30, and 30XP) were compared.The method was reproducible, easy to perform, not time-consuming and allowed us to demonstrate that the sensitivity to testicular hyaluronidase was dependent on the degree of crosslinking of the gels and also on their monophasic/biphasic nature. Under our conditions, Surgiderm 30, 24XP and 30XP were the most resistant gels.We propose to retain the hyaluronidase test to predict the in situ stability of a crosslinked gel used to fill skin wrinkles.     

激光二极管泵浦的高重复频率Nd：YAG激光器

报道两个１．５Ｗ连续激光二极管端面泵浦的声光调ＱＮｄ：ＹＡＧ激光器，输出激光脉冲的最高重复频率为３０ｋＨｚ重复频率１ｋＨｚ时，最窄脉宽为１２ｎｓ，最高峰值功率为１２．１ｋＷ。