Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang     

Quantum-Chemical Evaluation of the Protolytic Properties of Thiophenols

The enthalpies and free energies of proton affinity (PA) were calculated by the PM3 method for 27 thiophenoxide anions. For thiophenols, linear correlation has been found between the PAs and the values of pK _a measured by different authors in aqueous acetone, aqueous ethanol, and methanol media. The dependences found permit one to predict a priori the protolytic properties of thiophenols. The differential effects of aqueous ethanol media with different ethanol contents on thiophenol acidity were evaluated based on quantum-chemical data.Original Russian Text Copyright © 2004 by A. N. Pankratov and A. V. Shalabai__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 800–806, September–October, 2004.     

Crystallographic report: Crystal structure of tetra(4‐methyl‐5‐imidazole‐carboxyaldehyde)zinc(II) diperchlorate

The central zinc(II) atom in the title complex is tetrahedrally coordinated by four nitrogen atoms derived from 4‐methyl‐5‐imidazolecarboxyaldehyde ligands with Zn? N in the range 2.007(3) to 2.026(4) Å. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis and characterization of a novel nano-scale magnetic solid base catalyst involving a layered double hydroxide supported on a ferrite core

A nano-scale magnetic solid base catalyst MgAl-OH-LDH/MgFe₂O₄ (where LDH denotes layered double hydroxide) composed of MgAl-OH-LDH Brønsted base catalytic layers coated on MgFe₂O₄ spinel cores has been prepared. A magnetic precursor MgAl-CO₃-LDH/MgFe₂O₄ was prepared by a method involving separate nucleation and aging steps, and subsequently calcined to give a mixed metal oxide composite MgAl(O)/MgFe₂O₄ which was rehydrated to give MgAl-OH-LDH/MgFe₂O₄. The structure and magnetic properties of the nano-scale magnetic solid base MgAl-OH-LDH/MgFe₂O₄, together with those of the magnetic precursor MgAl-CO₃-LDH/MgFe₂O₄ and MgFe₂O₄ were characterized by XRD, XPS, low temperature N₂ adsorption and vibrating sample magnetometry (VSM). The MgAl-OH-LDH/MgFe₂O₄ composite possesses a mesoporous structure with pore size ranging from 2 to 20 nm with particle size mainly in the range 35-130 nm. The catalytic properties of MgAl-OH-LDH/MgFe₂O₄ were evaluated using the self-condensation of acetone at 273 K as a probe reaction. The results showed that the conversion of acetone to diacetone alcohol reached the thermodynamic equilibrium value of 23% at 273 K. The catalyst was easily recovered through application of an external magnetic field, and when the reclaimed catalyst was used in a second run for the same reaction, the reactivity remained unchanged.     

高剥离类镁等电子序列的磁偶极M1和电四极E2光谱跃迁理论研究

利用全相对论性多组态Dirac-Fock广义平均能级方法，系统地计算了类镁离子3s3p磁偶极Ml^3P2--^3P1和电四极E2 ^2P2--^3P0(Z=20-103)光谱跃迁的能级间隔、跃迁几率和振子强度。计算中考虑了原子核的有限体积效应，进行了高阶Breit修正和QED修正，所得到的能级间隔和最近的实验数据及理论计算值进行了比较。计算结果表明：高原子序数的高荷电离子的磁偶极矩M1和电四极矩E2跃迁几率和中性原子的电偶极E1的相当，在ICF和MCF高温激光等离子体中，磁偶极矩M1和电四极矩E2跃迁过程不容被忽视。     

Propagator matrices as matrices of power''s series. II. It''s relationship with HF''s stability problem and alternative solutions

Some non-singlet quasi-instabilities (QIs) cases that arise in the calculation of NMR-J parameters are analyzed within response theory. The relationship between ‘very close to zero’ eigenvalues of the principal propagator and the rate of convergency for specific coupling pathways is shown by a power series implemented to calculate the principal propagator matrix. A natural criterion for the analysis of the stability problem emerges from that series. This is more general and accurate compared with previous proposals. Its relationship with π-type molecular orbitals is given. We present an alternative scheme to minimize the effects of non-singlet QIs in such a way that the NMR-J parameters become close to the best theoretical calculations for H₂CX (X=CH₂, NH and O).     

Synthesis of MgAl2O4 Spinel Nanometer Powder via Biology Polysaccharide Assisted Sol-Gel Process

A novel and cost-effective sol-gel process for preparation of MgAl₂O₄ spinel nanometer powders has been developed in this study. A solution of magnesium and aluminum nitrates in stoichiometric proportion was successfully embraced in the biology polysaccharide gel network, formed by the synergistic interaction between xanthan gum (XG) and locust bean gum (LBG) utilizing their broad-spectrum stability of salt tolerance and character of transformation from sol to gel on the condition of proper temperature and relative proportion of polymeric components. Dry gel could be obtained by vacuum dehydration of aqueous gel at low temperatures. Monolithic MgAl₂O₄ spinel nanometer powders were produced by calcining the dry gel above 800°C, with average crystallite size of 20 nanometers.     

超导氧化物La1.85Sr0.15CuO4/超高分子量聚乙烯复合材料的输运性质

采用热压法获得了具有不同混合比例的超导氧化物La1.85Sr0.15CuO4/超高分子量聚乙烯导电复合材料,并利用x射线衍射、扫描电子显微镜和标准四引线方法对复合材料的结构和低温电输运性质进行测量.实验结果显示,超导氧化物La1.85Sr0.15CuO4颗粒随机分布在聚合物本体中,相互间没有连接构成网络结构.在正常态下,复合材料的电阻-温度变化曲线给出类半导体行为.但对应于超导氧化物La1.85Sr0.15CuO4的超导转变温度Tc处,复合材料的电阻-温度变化曲线出现了极小值.室温下电阻率ρ随外加电场强度E的变化曲线测量结果表明,ρ-E曲线为一线形关系,随着电场强度E增加,电阻率ρ下降.文中对可能存在的导电机制进行分析,结果表明隧道贯穿模型可以很好地解释复合材料的导电机制.另外,外加电场强度E对复合材料的电输运特性有明显的影响.