On-column injection onto capillary columns. Part 2: Study of sampling conditions; practical recommendations

During one year continuous use of on-column injection, the typical advantages described in our first report have fully been confirmed. In addition the analysis of large sample volumes has proved promising. Only minor modifications have been applied to the on-column injector device. Broad evidence has been gathered showing that full separation efficiency of the capillary columns after on-column injection is attained only when cold trapping or the solvent effect, as band shortening mechanisms, are working- While, under the conditions of on-column injection, cold trapping is less efficient than with other injection techniques, the opposite holds true for the solvent effect. Compared with splitless injection, the danger of excessive solvent condensation on the column is increased. A working rule is presented for establishing the optimal chromatographic conditions for handling large sample volumes while ensuring full separation efficiency yet avoiding harm to the column.     

Boson peak and fast relaxation process near the glass transition in polystyrene

Atactic polystyrene, both side group and main chain deuterated, was investigated by inelastic neutron scattering in a wide temperature range around the glass transition from 2 to 450 K. In the glass the Boson peak position is only very weakly influenced by the deuteration of the phenyl group. In the neighborhood of the glass transition temperatureT _g we find a fast relaxation process similar to other glasses. The onset of the fast relaxation in polystyrene, however, is observed already at temperaturesT _g — 200 K. Results from partially deuterated polystyrene suggest a change of the phenyl ring dynamics already far belowT _g.     

Measurement of attachment force of microbial cells

A parallel-plate flow chamber consisting of two transparent electro-conductive glass plates was constructed. The two glass plates were set parallel to each other and connected to a potentiostat apparatus to regulate the strength of the electric field between the plates. A microbial cell suspension was flowed through the chamber. This system enabled the application of an electrostatic force to suspend charged particles, e.g. microbial cells, existing between the two plates. The time course of the cell attachment of Pseudomonas syringae pv. atropurpurea NIAES 1309 suspended in 10 mM phosphate buffer solution (pH 7.0) to the glass plate was investigated at various electric field strengths ranging from −4.2 to +4.1 V cm⁻¹. The attachment rate and the maximum number of attached cells increased linearly with the increase in the strength of the positive electric field. In contrast, the rate and the number of cells decreased linearly with the decrease in the strength of the negative electric field. These linear relations gave a specific value for the strength of the electric field (−5.9 ± 0.7 V cm⁻¹) where the electrostatic repulsion and the microbial attachment force were thought to be equal, resulting in no cell attachment. From this value, the electrostatic repulsion, i.e. the microbial attachment force, was calculated to be 5.0 × 10⁻¹¹ N cell⁻¹ for cells of average size.     

Dielectric relaxation of polystyrene with side-chain- and chain-end-labels

Polystyrenes with different concentrations of side groups with cyano groups were prepared and complex dielectric constants were measured in the range of the glass transition temperature and the frequency range of 10^–2–10⁷ Hz.The GPC and DSC measurements showed that the molecular weight of these polystyrenes was about 10500 g/mole and the glass transition temperatures were 89.5°C for all samples.The dielectric relaxation spectra obtained for the side group polystyrene labels and also the chain-end polystyrene labels prepared before [9] were analyzed to find out the degree of coupling of the chain-end and side-group labels with the cooperative reorientation of the polymeric matrix. The analysis of the spectra was carried out using the analysis method developed by Mansour and Stoll [6].The results obtained showed that both end- and side-group labels are strongly coupled with the segmental reorientation and relax with relaxation times longer than that of the segments.The value of logf _m = (logf _m(label)) – logf _m(matrix)) was obtained from the recently designed comparison diagram suggested by Mansour and Stoll [6, 14]. The value of logf _m depends on the label length in the case of chain-end labels.It was surprising to find that the side groups relax slower than the segments by only 0.9 decades. These results obtained implied that the label relaxes through a multistep relaxation mechanism of the side and end groups and not through a diffusion mechanism of the whole chain. In addition, the effective lengths of the relaxing units were determined using the empirical equation obtained before in the case of rodlike molecules in polyisoprene [7].     

Ageing of Conductive Polyaniline/Poly(Ethylene-co-Vinylacetate) Composites Studied by Thermal Methods

The long-term environmental ageing of conductive composite films containing ethylene-co-vinyl-acetate (EVA) copolymer and a complex of polyaniline (PANI) and dodecylbenzenesulfonic acid (DBSA) was studied by using differential scanning calorimetry (DSC). We assume that both phase separation and crosslinking of PANI main chains occur in the systems. On the other hand, the competition between PANI–DBSA complex self-organization and crystallization of EVA matrix result in structural changes and formation of continuous conductive network, responsible for significantly increased (ca five orders of magnitude) electrical conductivity of the aged films. This revised version was published online in August 2006 with corrections to the Cover Date.     

Volatile phase profiling of mainstream smoke by glass capillary gas-chromatographic techniques

A heated injection system for a microprocessor-controlled GC has been developed for the (GC)² analysis of the volatile phase of whole smoke of a cigarette. Effects of injection port temperature and the presence of a Cambridge filter pad are demonstrated. Chromatograms are shown for smoke samples with and without a Cambridge Filter with the sample valve oven at 25°, 165° and 205°C. The use of a flame ionization and a nitrogen-phosphorous detector is illustrated.     

Infrared spectra of M+NO 3 − contact ion pairs in aprotic solvents and matrix isolated in the corresponding glasses

Studies of the vibrational spectra of matrix-isolated M⁺NO ₃ ^– ion pairs have been extended to glassy aprotic solvents. The deuterated form of the solvents DMSO, THF, and ACN have windows through the 7- nitrate ionv ₃(e) mode infrared region, so it was possible to clearly observe the splitting of the degeneracy of this mode,v ₃, produced by the contacting, but solvated, alkali metal cation. Primary attention has been directed to the extent to which this splitting is reduced relative to the argon matrix values. This reduction, which reflects electron-density transfer from the solvating molecules to the ion pairs, is comparable to that observed for H₂O and NH₃ matrices as the splitting is reduced to 20–35% of the argon-matrix values. The extent of reduction ofv ₃ for the different solvents has been related to Gutmann's donicity number scale with the correlation holding well for solvent molecules of comparable size, DMSO, THF and DMF, but breaking down for the smaller linear ACN, apparently because of more molecules in the cation solvation sphere. The matrix data have also been used, through comparison with spectra for saturated liquid solutions of Li⁺NO ₃ ^– , to show that the contact ion pair is the dominant species in liquid THF and ACN, whereas the ions are largely solvent separated in DMSO.     

A study of PBT/PC blends by modulated DSC and conventional DSC

Two poly(butylene terephthalate)/polycarbonate (PBT/PC) blends with different formulations were analyzed by modulated DSC (MDSC) and conventional DSC to determine differences in crystallization behavior. A significant difference (30°C in cold crystallization temperature) between the two samples was detectable by MDSC while no significant difference was seen by conventional DSC. That indicatesthe total heat flow from MDSC is not always equivalent to the heat flow from conventional DSC as we have assumed or seen before. The reason has not been fully understood, but may be related to unusual nucleation and crystallization induced by modulation. Alternative conventional DSC methods were developed and compared to the MDSC results.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe authors like to thank Drs. Bernhard Wunderlich and Robert Gallucci for helpful discussion, David Shaker and Mary Parsonage for some DSC experiments. Technical support from TA Instruments is also greatly appreciated.     

Forms of vibrations and structural changes in liquid state

Summary The forms of vibrations and displacements of particles in amorphous structures have been investigated. The particles, moving on highly non-linear amplitude, are responsible for the creation of disordered structures of amorphous bodies. The non-linear oscillators, even if 'few' in concentration, are characterized by unpredictable trajectories in phase space. The non-linear oscillators are fully developed in the liquid state above the crossover temperature T_cr and between T_cr and T_g their number decreases. Under T_g they completely disappear. The interconnection between the linear oscillators in blocks plays the most important role in the characteristic time spectra in liquid state. Using the additive properties of elements polarizibilities, the number of acoustical units in individual blocks at T_cr is estimated to be about 600 units. The diameter of blocks at T_cr was estimated to be about 1.8 nm. Even if the non-linear high amplitude motions disappear at solidification, the remnants of structural irregularity remain and the disordered structure of glass is formed.     

新型陶瓷材料的光激励发光性质研究

针对以往电子俘获光存储材料存在的问题，利用高温固相反应发制备了一种Eu^2 掺杂的氟氧化物玻璃陶瓷，研究表明在该材料中具有光激励发光(PSL)特性，并可用于电子俘获光存储。XRD分析表明该材料含有大量的BaF2微晶。根据其与BaF2相似的发光特性，推断玻璃陶瓷的PSL有可能来源于微晶中Eu^2 的5d-4f发射。但是决定光激励发光过程中的电子(空穴)陷阱的存在方式、电子迁移途径都有待进一步探讨的问题。与传统的BaFCl：Eu相比，这种材料的光激励发光衰减速度较慢。