Microgel-based engineered nanostructures and their applicability with template-directed layer-by-layer polyelectrolyte assembly in protein encapsulation

A novel strategy for the fabrication of microcapsules is elaborated by employing biomacromolecules and a dissolvable template. Calcium carbonate (CaCO(3)) microparticles were used as sacrificial templates for the two-step deposition of polyelectrolyte coatings by surface controlled precipitation (SCP) followed by the layer-by-layer (LbL) adsorption technique to form capsule shells. When sodium alginate was used for inner shell assembly, template decomposition with an acid resulted in simultaneous formation of microgel-like structures due to calcium ion-induced gelation. An extraction of the calcium after further LbL treatment resulted in microcapsules filled with the biopolymer. The hollow as well as the polymer-filled polyelectrolyte capsules were characterized using confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), and scanning force microscopy (SFM). The results demonstrated multiple functionalities of the CaCO(3) core - as supporting template, porous core for increased polymer accommodation/immobilization, and as a source of shell-hardening material. The LbL treatment of the core-inner shell assembly resulted in further surface stabilization of the capsule wall and supplementation of a nanostructured diffusion barrier for encapsulated material. The polymer forming the inner shell governs the chemistry of the capsule interior and could be engineered to obtain a matrix for protein/drug encapsulation or immobilization. The outer shell could be used to precisely tune the properties of the capsule wall and exterior. [Diagram: see text] Confocal laser scanning microscopy (CLSM) image of microcapsules (insert is after treating with rhodamine 6G to stain the capsule wall).     

LBL分子沉积法制备葡萄糖氧化酶电极

采用以静电力为主的逐层分子交替沉积技术制备葡萄糖氧化酶（GOD）电极.通过带有正电荷的聚二甲基二烯丙基铵盐酸盐（PDDA）和带有负电荷的GOD交替沉积在修饰有3-巯基-1-丙基磺酸钠（MPS）的金电极表面.以甲酸二茂铁为电子媒介体,用循环伏安法检测GOD电极对葡萄糖的响应.结果表明,当GOD电极组装层数小于4时,电流响应随着层数的增加而增大,超过4层时电流响应减小.其中4层GOD修饰电极的线性范围为0.55～6.63 mmol•L－1,当pH为7.0时,响应最大.同时电极的检测重现性能良好,相对标准偏差为2.4％.     

Spectroelectrochemical Measurements at Colloidal Au Multilayer Optically Transparent Electrodes

Application of thin colloidal Au multilayers on glass substrates as optically transparent electrodes is reported herein. Evaluation of the electrode by scanning electron microscopy and as an optically transparent thin layer electrode (OTTLE) illustrate its use for spectroelectrochemical applications. A spectroelectrochemical Nernst plot acquired for the oxidation of o‐tolidine yielded a value of E°=0.605 V (vs. Ag/AgCl) and n=1.88. Both of these values are in excellent agreement with previously published values obtained using a traditional Au minigrid OTTLE. The colloidal Au multilayer electrode is expected to offer many advantages over the minigrid OTTLE in specific applications. These advantages include direct control over microscopic surface topography, large electrochemical surface area, applicability to many different electrode geometries, and increased microscopic surface roughness for SERS and SPR applications.     

Investigation of the detection limit for the determination,by pyrolysis-capillary GC,of the thickness of ultra thin PMMA layers coated on to PET film

The determination of nanometer thick layers of poly(methyl methacrylate) coated on to the surface of poly(ethylene terephthalate) film has been investigated by high resolution pyrolysis gas chromatography without sample pretreatment or modification of the instrumentation used. A good linear relationship was observed between the quantity of the characteristic pyrolysate and the thickness of the poly(methyl methacrylate) layer; the detection limit was sufficient to enable the quantitation of poly(methyl methacrylate)-to-poly(ethylene terephthalate) film thickness ratios of 1:20000 in composite materials.     

Spectroscopic Interrogation of Layer-by-layer Assembled Films of Conjugated Polyelectrolytes

Layer-by-layer fluorescent conjugated polyelectrolyte films have been studied. The photoluminescence of conjugate polyelectrolytes was observed to be highly tunable during this film assembly process. Efficient photoinduced electron transfer from thus prepared highly luminescent film to a natural electron-transfer protein cytochrome c has also been observed.     

[Co（H2o）4（NCS）2]（18—C—6）的薄层光谱电化学研究

利用光谱电化学方法来研究冠醚类化合物的文章尚未见报导.本文在测定用凝胶法合成的[Co(H_2O)(NCS)_2](18-C-6)的核磁共振谱和红外光谱的基础上,使用循环伏安法和薄层光谱电化学技术,在金微栅电极上测定了此配合物在乙腈溶剂中的第一步克式量电势(E~0′)和电子转移数(n),并推测了电还原反应机理.     

Stainless steel capillary columns for high temperature gas chromatography

A layer of elemental silicon has been deposited on the surface of stainless steel tubing by means of chemical vapor deposition (CVD). Two kinds of capillary column were prepared from the deactivated tubing: cross-linked, silanol-terminated polydime-thylsiloxane wall coated open tubular (WCOT) columns and molecular sieve 13X porous layer open tubular (PLOT) columns. Unlike fused silica capillary columns, stainless steel WCOT and PLOT columns can be operated at temperatures in excess of 400°C. High temperature simulated distillation has been performed successfully with a macro bore WCOT column and rapid PNA (paraffin, naphthene, and aromatic) analysis with a multidimensional gas solid chromatographic (GSC) system using PLOT columns.     

The preparation of thick-film glass capillary columns

A detailed method for the routine preparation of glass capillary columns is presented. The method consists of coating a glass tube with quartz powder prior to pulling the tube into a capillary. The inner surface of the capillary consists of an even distribution of quartz particles fused to the walls. This surface has been found readily deactivated by standard procedures and ideal for the preparation of thick-film glass capillary columns. The method has been thoroughly tested in two independent laboratories to ensure that the procedures described are reproducible.     

边界层对粗糙单裂隙溶质运移影响试验

为探究非费克(non-Fickian)运移表现出的峰值提前到达和拖尾等现象,开展了粗糙单裂隙溶质运移试验,总结了粗糙单裂隙中溶质运移特征及运移机理,结合边界层理论对峰值提前到达和拖尾现象进行了分析和解释。结果表明：峰值时间和拖尾时间与边界层厚度之间存在较好的线性相关关系;边界层对裂隙介质溶质运移有较为显著影响,即水流速度越小,边界层厚度越大,滞留在边界层内部的溶质越多,溶质获取率越低;粗糙单裂隙中溶质穿透曲线的峰值提前和拖尾现象是由裂隙中心处以惯性力主导的主流区和裂隙壁面以黏性力主导的边界层区共同作用造成的,其中峰值时间主要由主流区的对流因素控制,而边界层区域的存在对拖尾时间影响较大。     

考虑水-力耦合和不同应力路径的砂岩卸荷力学特性试验

为研究不同渗透压力条件下的岩石卸荷力学特性,选取砂岩为研究对象,开展了不同渗透压力和不同应力路径下的三轴卸荷试验,并与常规三轴试验进行对比,比较了不同应力路径下的岩石强度特性,分析了渗透压力对岩石变形和强度参数的影响。试验结果表明：渗透压力的增大会弱化岩石强度,岩石的峰值强度随渗透压力的增大而降低,而轴向变形随渗透压力增大而增加,渗透压力越大,岩石的压密段特征越明显;针对两种不同的卸荷应力路径,恒轴压卸围压路径条件下,岩石的黏聚力不断降低,内摩擦角不断增加,而加轴压卸围压路径条件下,岩石的黏聚力不断增加,内摩擦角逐渐降低。