Pulsed pump: Thermal effects in solid state lasers under super-Gaussian pulses

Solid state laser (SSL) powers can be realistically scaled when pumped by a real, efficient and multimode pulse. In this work, a fourth-order super-Gaussian pulse was assumed as a pump for SSL’s and a complete analytical expression for the thermal phase shift is given. Moreover, the focal length of thermal lens in paraxial ray approximation regime was studied. The results when applied to a Ti: sapphire crystal show an appreciable correction for abberation compared to a top-hat pulse.     

模糊神经网络在复合地基沉降量预测中的应用

复合地基后期沉降变形对于建筑物设计及安全具有重要意义,针对通过长期沉降观测以得到复合地基的最终沉降需要耗费较多资源的问题,提出了一种基于模糊神经网络的预测方法.该方法考虑沉降变化过程有较大的随机性和模糊性,直接将样本数据进行模糊化,所得的模糊数代表了样本点集与控制点集中各分量之间的相关度,并依此建立模糊BP神经网络进行学习和估算.实验结果表明了该方法对沉降进行预测是可行与有效的,且在相对误差的有效控制方面优于BP网络方法与灰色方法.     

LiCoO2中锂离子固相扩散系数随循环次数的变化

The solid diffusion coefficient of lithium-ion in LiCoO₂ cathode material has been investigated by the capacity intermittent titration technique (CITT) at different voltages and at different charge/discharge cycles. By SEM, XRD and FTIR techniques, the structure of LiCoO₂ was studied before and after charge-discharge cycles, and the relationship between solid diffusion coefficient and crystal structure was further discussed. CITT results show that the value of Li⁺ solid diffusion coefficient of LiCoO₂ is about 10^-12 cm²·s^-1. During the whole charge-discharge cycles, the Li⁺ solid diffusion coefficient decreased within the voltage of 4.0～4.3 V, which is attributed to the change of the structure of LiCoO₂.     

WS2 超细粉体的固相法合成

WS2 超细粉体的固相法合成;WS2;固相反应;过硫系数;高能球磨;粒度     

核磁共振法测定高聚物的结构—核磁共振二维谱

介绍了核磁共振(NMR)波谱,尤其是核磁共振二维谱(2D NMR)在最近几年内的进展。内容包括怎样用NMR测定高聚物的序列分布、共聚物结构、聚合物的混溶性、聚合物液晶的取向度、分子量、短链度和长链支化度、凝聚态高聚物的多相结构等。     

Ni-SDC固体氧化物燃料电池阳极的合成和性质

采用柠檬酸-硝酸盐溶胶-凝胶低温自蔓延燃烧法制备氧化镍（NiO）粉末和Ce0.8Sm0.2O1.9（SDC）粉末，并将NiO与SDC按不同质量比和不同制备工艺制备了固体氧化物燃料电池（SOFC）的阳极前身。再用自组装的还原装置将其在820℃经2．5h还原后，采用四端子法测量其电导率值。分析了阳极片电导率与阳极片微结构、Ni的质量百分数、混合研磨时间及烧结温度之间的关系。结果显示，阳极片的电导率强烈依赖于镍含量和制备工艺。     

Synthesis and Structure of Ag_3PSe_4

The title compound Ag3PSe4 was synthesized by the reaction of Ag powder,P2Se5 and Se in a molar ratio of 1:1:1 at 500℃ and structurally characterized by X-ray crystallography.The crystal belongs to orthorhombic,space group Pmn21 with cell parameters:a=7.689(4),b=6.660(3),c=6.379(4)A,V=326.7(3)A^3,Z=2,Dc=6.816g/cm^3,Mr=670.42,F(000)=584,μ=31.302mm^-1,R=0.0606,wR=0.1289 and S=1.012,The 3-D structure can be regarded as constructed from the stacking of puckered Ag-P-Se honeycomb-like sheets along the c direction,in which the Ag,P and Se atoms are bonded to each other to form a chair-like six-membered ring,and the rings then build the sheets by sharing edges.     

Fiber-in-Tube Solid Phase Extraction (FIT-SPE) for Miniaturized Sample Preparation Process

A typical analytical separation procedure has several important steps: sample preparation, isolation, identification, quantitation, statistical evaluation and final decision. Each step is alwayscritical to obtain correct results to fulfill the analytical purpose. In these various steps sample