Sequential injection analysis system for on-line monitoring of l-cysteine concentration in biological processes

A sequential injection analysis (SIA) system was developed to monitor the concentration of l-cysteine in biological processes on-line. It is based on the redox reaction of l-cysteine with iron(III) in the presence of 1,10-phenanthroline (phen) and the detection of the red-iron(II)-phen complex with a spectrophotometry. The system was fully automated using software written in the LabVIEW™ development environment. A number of system variables such as the flow rate of the carrier buffer solution, the volume ratio of the sample to the reagents, and the reaction coil length, etc., were evaluated to increase the sensitivity and performance of the SIA system. Under partially optimized operating conditions the performance of the SIA system was linear up to a concentration of l-cysteine of 1 mM (R² = 0.998) with a detection limit of 0.005 mM and a sample frequency of 15 hr⁻¹. The SIA system was employed to monitor the concentration of l-cysteine on-line in a continuously stirred reactor and a fermentation process of Saccharomyces cerevisiae. The on-line monitored data were in good agreement with the off-line data measured by a HPLC with a fluorescence detector (n = 15, R² = 09899).     

Molecular electrostatic potentials as input for the alignment of HIV-1 integrase inhibitors in 3D QSAR

Comparative molecular similarity indices analysis (CoMSIA), a three-dimensional quantitative structure activity relationship (3D QSAR) paradigm, was used to examine the correlations between the calculated physicochemical properties and the in vitro activities (3'-processing and 3'-strand transfer inhibition) of a series of human immunodeficiency virus type 1 (HIV-1) integrase inhibitors. The training set consisted of 34 molecules from five structurally diverse classes: salicylpyrazolinones, dioxepinones, coumarins, quinones, and benzoic hydrazides. The data set was aligned using extrema of molecular electrostatic potentials (MEPs). The predictive ability of the resultant model was evaluated using a test set comprised of 7 molecules belonging to a different structural class of thiazepinediones. A CoMSIA model using an MEP-based alignment showed considerable internal as well external predictive ability (r2(cv) = 0.821, r2(pred) = 0.608 for 3'-processing; and r2(cv) = 0.759, r2(pred.) = 0.660 for 3'-strand transfer).     

Application of manganese(IV) dioxide microcolumn for determination and speciation of nitrite and nitrate using a flow injection analysis-flame atomic absorption spectrometry system

A flow injection (FI) method with flame atomic absorption spectrometry (FAAS) detection was developed for the determination and speciation of nitrite and nitrate in foodstuffs and wastewaters. The method is based on the oxidation of nitrite to nitrate using a manganese(IV) dioxide oxidant microcolumn where the flow of the sample through the microcolumn reduces the MnO₂ solid phase reagent to Mn(II), which is measured by FAAS. The absorbance of Mn(II) are proportional to the concentration of nitrite in the samples. The injected sample volume was 400 μL with a sampling rate of analyses was 90 h⁻¹ with a relative standard deviation better than 1.0% in a repeatability study. Nitrate is reduced to nitrite in proposed FI-FAAS system using a copperized cadmium microcolumn and analyzed as nitrite. The calibration curves were linear up to 20 mg L⁻¹ and 30 mg L⁻¹ with a detection limit of 0.07 mg L⁻¹ and 0.14 mg L⁻¹ for nitrite and nitrate, respectively. The results exhibit no interference from the presence of large amounts of ions. The method was successfully applied to the speciation of nitrite and nitrate in spiked natural water, wastewater and foodstuff samples. The precision and accuracy of the proposed method were comparable to those of the reference spectrophotometric method.     

Diffusion layer titration of dipyrone in pharmaceuticals at a dual-band electrochemical cell

This paper describes the use of a thin-layered dual-band electrochemical cell operating at flow conditions to determine dipyrone (sodium salt of 1-phenil-2,3-dimethyl-4-methylaminomethanesulfonate-5-pyrazolone) by reaction with electrogenerated iodine. The electrolytic cell consisted of two closely spaced gold electrodes, the upper stream electrode serving as the generator electrode and the downstream electrode working as the collector electrode. A linear dynamic range from 2 to 15 μmol l⁻¹ dipyrone was obtained by using a sample volume of 100 μl, with a detection limit of 1.1 μmol l⁻¹. Standard deviation (S.D.) of 3.4% for 20 repetitive injections of a 40 μmol l⁻¹ dipyrone solution and sampling frequency of 90 h⁻¹ were achieved. The results obtained with the thin-layered dual-band electrochemical cell for dipyrone determination in three different pharmaceutical samples compared well with those found by iodimetry with coulometrically generated iodine.     

Rapid and sensitive method for determining free amino acids in honey by gas chromatography with flame ionization or mass spectrometric detection

This paper describes a rapid, sensitive and specific method for determination of free amino acids in honey involving a new reaction of derivatization and gas chromatography (GC) with flame ionization (FID) and mass spectrometric (MS) detection. The method allows the determination of 22 free amino acids in honey samples in a short time: 8 and 5 min for GC-FID and GC-MS, respectively. Quantitation was performed using Norvaline as internal standard, with detection limits ranging between 0.112 and 1.795 mg/L by GC-FID and between 0.001 and 0.291 mg/L by GC-MS in the selected-ion monitoring mode. The method was validated and applied to a set of 74 honey samples belonging to four different botanical origins: eucaliptus, rosemary, orange and heather. The statistical treatment of data shows a correct classification of different origins over 90%.     

Comparative study on separation of diastereomers by HPLC

Summary Reversed (RP-HPLC) and normal phase chromatographic (NP-HPLC) separations have been developed for diastereomers ofN-acyl-1-methyl-1,2,3,4-tetrahydo-β-carbolines which are acylated derivatives of simple natural β-carboline alkaloids. Separations of derivatives having different acyl moieties in theO,O-diacyl-tartaric acid ester subtituent differed remarkably. Little or no resolution in either NP-HPLC or RP-HPLC could be achieved with the diacetyl-tartrate derivative. Base-line separation by RP-HPLC but no separation by NP-HPLC was possible with the bulkier and more apolar dipivaloyl derivative. Retention order of the bis-benzoylated diastereomers was reversed and separation time increased dramatically by RP-HPLC. Good separation of the medium polarity, but rigid,N-camphanyl derivative by NP-HPLC has been achieved, whereas RP-HPLC could not be used for separation of these diastereomers. Separability of different diastereomers was highly dependent on polarity and rigidity of the derivatizingN-acyl moieties. Conformational analysis by molecular mechanics and comparison of the lowest energy conformational states of the diastereomers was applied to rationalise separation-retention behaviour of stereoisomers by RP-HPLC. Presented at Balaton Symposium '01 on High-Performance Separation Methods, Siófok, Hungary, September 2–4, 2001     

4-hydroxy-2-quinolones. 96. Synthesis and properties of 4-methyl-2-oxo-1,2-dihydroquinoline-3-carboxylic acid

Alkaline hydrolysis of the ethyl ester of 4-(cyanoethoxycarbonylmethyl)-2-oxo-1,2-dihydroquinoline-3-carboxylic acid is accompanied by decarboxylation with loss of two molecules of CO₂ and leads to 4-methyl-2-oxo-1,2-dihydroquinoline-3-carboxylic acid. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 887–893, June, 2006.     

Solid-phase fluorescence spectroscopy for the determination of acetylsalicylic acid in powdered pharmaceutical samples

A rapid, simple and rugged procedure without requiring any prior sample treatment was developed for the determination of acetylsalicylic acid (ASA) in tablets formulations by solid-phase fluorescence spectroscopy. The method was carried out on powdered samples, consisting of an active substance dispersed in lactose, maize starch, talc and magnesium stearate. Previous knowledge of the sample bulk composition is needed for proper application of the method. Wavelengths for maximum excitation and emission were 288 and 318 nm, respectively, and the fluorescence intensity was linear with ASA concentration within the 50-170 mg g⁻¹ range. Detection and quantification limits were 2.2 and 7.3 mg g⁻¹, and the analytical frequency was 200 h⁻¹. For a typical sample, the relative standard deviation of results was estimated as 2.3% (n = 10). Accuracy was assessed by comparing the analytical results obtained with the proposed method with those related to a reference method recommended by British Pharmacopoeia: no differences between the methods were found at the 95% confidence level.     

Synthesis of PbTiO3 ceramics using mechanical alloying and solid state sintering

The pressure-less sintering behavior of PbTiO₃ powders synthesized by mechanical alloying TiO₂ and PbO was investigated using dilatometry and Rietveld refinements of X-ray diffraction patterns. As-synthesized, the powders are nanocrystalline with a mean particle size of 20 nm. Pressure-less sintering in the range 500-1050°C gives single phase ceramics with densities of 85-90% and crystallite sizes in the range 80-400 nm. Cracking due to the paraelectric-ferroelectric phase transition was not observed in samples sintered below 700°C due to the small crystallite size whereas macroscopic cracks formed in samples sintered above 700°C. Rietveld analysis indicates the formation of Pb vacancies in samples sintered and held for 24 h at intermediate temperatures (600-1000°C) which gives some insight into the mechanism of Pb loss and second phase formation in this system.     

Simultaneous determination of theophylline,tolbutamide, mephenytoin,debrisoquin, and dapsone in human plasma using high‐speed gradient liquid chromatography/tandem mass spectrometry on a silica‐based monolithic column

Theophylline, tolbutamide, mephenytoin, debrisoquin, and dapsone are marker substrates for CYP1A2, CYP2C9, CYP2C19, CYP2D6, and CYP3A4, respectively. A silica‐based monolithic column (Chromolith SpeedROD RP‐18e, 50×4.6 mm) was used to separate these five marker substrates of cytochrome P450 within only 84 s. Linear gradient elution was from acetonitrile‐water‐formic acid (10 : 90 : 1, v/v/v) to acetonitrile‐water‐formic acid (90 : 10 : 1, v/v/v) in 1.4 min. The flow rate was 2.5 mL/min. The retention time was 0.52 min for theophylline, 0.67 min for debrisoquin, 0.78 min for dapsone, 0.96 min for mephenytoin, and 1.13 min for tolbutamide. Detection was by tandem mass spectrometry using a PE Sciex API 3000 mass spectrometer with a Turbo‐Ionspray source in positive mode. A simple protein precipitation method was used. This method was validated over the concentration range of 5–2000 ng/mL based on the sample volume of 0.1 mL.