Separation and determination of homogenous fatty alcohol ethoxylates by liquid chromatography with mulitstage mass spectrometry

Alcohol ethoxylates (AEs) are a significant component of a stream of surfactants directed to the aquatic environment. The aim of this work was the investigation of the dependence of the analytical signals of homogeneous AE homologues on liquid chromatography with tandem mass spectrometry conditions, as well as the separation of AEs from the water matrix and, on this basis, the development of an analytical procedure suitable for the determination of AEs in environmental samples. Homogeneous homologues containing dodecyl moiety and 2–9 oxyethylene subunits were investigated. The analytical signals of the investigated homologues were optimized in terms of concentration of ammonium acetate in the mobile phase (optimum 5 mM) and a column temperature (optimum 35°C) of the liquid chromatography with tandem mass spectrometry system. A separation of AEs from the water matrix by liquid–liquid extraction (ethyl acetate, chloroform) or solid‐phase extraction (C₁₈, styrene divinylbenzene, H‐RX) was investigated. In a model investigation, the best recoveries (>90%) were obtained with a styrene divinylbenzene cartridge eluted with a 1:1 mixture of chloroform and methanol. However, much worse recoveries were obtained from the river water sample. Better results were obtained for liquid–liquid extraction with ethyl acetate. Recoveries of 62–80% were obtained for homologues having 4–9 oxyethylene subunits, at the lowest spike.     

Multiresidue analysis of quinolones in water by ultra‐high perfomance liquid chromatography with tandem mass spectrometry using a simple and effective sample treatment

A rapid and simple analytical method has been developed for the determination of 19 quinolones in environmental water samples using ultra high performance liquid chromatography with tandem mass spectrometry. Chromatographic and detection conditions have been optimized and the separation was achieved in less than 4 min. The separation was carried out using a new‐generation column filled with superficially porous particles, resulting in lower backpressure and better resolution than totally porous particle columns. The quinolones were detected by electrospray ionization in positive mode using multiple‐reaction monitoring mode for acquisition. A sample treatment based on liquid–liquid extraction and phase separation via salting‐out was employed to achieve a fast and simple extraction that enables the multiresidue analysis. The method has been validated for an environmental well water sample from a mountain area. Very low limits of detection (between 10 and 90 ng/L) with relative standard deviations lower than 16.5% and recoveries higher than 73% were achieved. Moreover, well waters from different origins (mountain and coast areas and irrigated land) have been evaluated and similar results were obtained.     

Alternative solvent‐based methyl benzoate vortex‐assisted dispersive liquid–liquid microextraction for the high‐performance liquid chromatographic determination of benzimidazole fungicides in environmental water samples

Vortex‐assisted dispersive liquid–liquid microextraction using methyl benzoate as an alternative extraction solvent for extracting and preconcentrating three benzimidazole fungicides (i.e., carbendazim, thiabendazole, and fluberidazole) in environmental water samples before high‐performance liquid chromatographic analysis has been developed. The selected microextraction conditions were 250 μL of methyl benzoate containing 300 μL of ethanol, 1.0% w/v sodium acetate, and vortex agitation speed of 2100 rpm for 30 s. Under optimum conditions, preconcentration factors were 14.5–39.0 for the target fungicides. Limits of detection were obtained in the range of 0.01–0.05 μg/L. The proposed method was then applied to surface water samples and the recovery evaluations at three spiked concentration levels of 5, 30, and 50 μg/L were obtained in the range of 77.4–110.9% with the relative standard deviation <7.4%. The present method was simple, rapid, low cost, sensitive, environmentally friendly, and suitable for the trace analysis of the studied fungicides in environmental water samples.     

Ultra‐trace level determination of diquat and paraquat residues in surface and drinking water using ion‐pair liquid chromatography with tandem mass spectrometry: A comparison of direct injection and solid‐phase extraction methods

Direct injection and solid‐phase extraction methods for the determination of diquat and paraquat in surface and drinking water were developed using liquid chromatography with tandem mass spectrometry. The signal intensities of analytes based on six ion‐pairing reagents were compared with each other, and 12.5 mM nonafluoropentanoic acid was selected as the best suited amongst them. A clean‐up method was developed using Oasis hydrophilic–lipophilic balance; this was compared to the direct injection method, with respect to limits of detection, interference, precision, and accuracy. Limits of quantification of diquat and paraquat were 0.03 and 0.01 μg/L using the direct injection method, and 0.002 and 0.001 μg/L using the hydrophilic–lipophilic balance method. When the hydrophilic–lipophilic balance method was used to analyze target compounds in 114 surface water and 30 drinking water samples, paraquat and diquat were detected within a concentration range of 0.001–0.12 and 0.002–0.038 μg/L in surface water, respectively. When the direct injection method was used to analyze target compounds in the same samples, the detected concentrations of paraquat and diquat were within 25% in samples being >0.015 μg/L using the hydrophilic–lipophilic balance method. The liquid chromatography with tandem mass spectrometry method using direct injection can thus be used for routine monitoring of paraquat and diquat in surface and drinking water.     

Computer‐assisted design and synthesis of molecularly imprinted polymers for the simultaneous determination of six carbamate pesticides from environmental water

The computer‐assisted design and synthesis of molecularly imprinted polymers for the simultaneous capture of six carbamate pesticides from environmental water are reported in this work. The quantum mechanical computational approach was employed to design the molecularly imprinted polymers with carbofuran as template. The interaction energies between the template molecule and different functional monomers in various solvents were calculated to assist in the selection of the functional monomer and porogen. The optimised molecularly imprinted polymer was subsequently used as a class‐selective sorbent in solid‐phase extraction for pre‐concentration and determination of carbamates from environmental water. The parameters influencing the extraction efficiency of the molecularly imprinted solid‐phase extraction procedure were systematically investigated to facilitate the class‐selective extraction. For the proposed method, linearity was observed over the range of 2–500 ng/mL with the correlation coefficient ranging from 0.9760 to 1.000. The limits of detection ranged from 0.2 to 1.2 ng/mL, and the limit of quantification was 4 ng/mL. These results confirm that computer‐assisted design is an effective evaluation tool for molecularly imprinted polymers synthesis, and that molecularly imprinted solid‐phase extraction can be applied to the simultaneous analysis of carbamates in environmental water.     

Simultaneous effect of carbon and water on NOx adsorption on a stabilized Pt–Ba/Al2O3 catalyst

The influence of the presence of H₂O on the contact between carbon, used as model soot, and a model four-way catalyst (1% Pt–10% BaO/Al₂O₃) was investigated. NO_x adsorption/TPD cycles at 300 °C together with XRD, XPS and DRIFTS characterizations showed that only surface nitrate species are destabilized by the carbon present in the catalytic bed, leading to a decrease of the NO_x storage capacity and carbonate species formation. In another way, injection of water in the reactive gas flow decreases also the NO_x storage capacity of the catalyst, but promotes the formation of stable nitrate species. A non-cumulative effect of carbon and water was observed. It was proposed that a competition between the destabilization, by carbon, of weakly bonded surface nitrate species and the enhancement of bulk nitrate species formation in the presence of water occurs.     

限制在疏水板中的新的六边形-四边形三层冰结构

对限制在两个光滑的疏水板间的水进行了分子动力学模拟,观察到了两种晶体结构,都满足冰规则．在1GPa的压强和1．0nm的板间距下获得的新的冰相是平坦的六边形-四边形三层冰．在此结构中,靠近板的两层（外层）中的水分子形成六边形环,中间层的水分子形成四边形环．对于外层的水分子,其四个氢键中的三个在同一层中,另一个氢键与中间层连接．对于中间层的水分子,四个氢键中的两个在同。层中,而另外两个氢键与两个不同的外层相连．虽然三层的形状不同,但其面密度却接近相等．另一种结构是在0．8nm的板问距和100MPa的侧向压下获得的平坦的六边形双层冰．模拟中的相变既有一阶相变,也有连续相变．     

Optimization of sampling frequency for routine river water quality monitoring

Sampling frequency is an important factor to be considered during the design of a water monitoring network,and the cost-effective selection of possible ways and means for the optimization of sampling frequency is still needed.This paper introduces water pollution index deviation ratio comparison(WPI DRC),a procedure for the optimization of sampling frequency for a routine river water quality monitoring system.Sampling frequency optimized using WPI DRC at monitoring station X5 in the mainstream of Xiangjiang River is compared with that established using the traditional Statistical Algorithm method.The result of comparison indicates that WPI DRC is more feasible than the traditional one.And then,the sampling frequencies for other 16 monitoring stations also have been optimized,and the results show the sampling frequencies of all the stations except that X4 are reduced,and there is no unacceptable difference between water quality evaluation results at 17 stations before and after the optimization.Therefore,it is concluded that WPI DRC is an effective optimization process with operable results,which can be used to fulfill the requirement of practical monitoring work.     

Selective adsorption and stable solidification of radioactive cesium ions by porous silica gels loaded with insoluble ferrocyanides

Development of highly functional cesium selective adsorbents for the decontamination of high-activity-level water(HALW) from the Fukushima NPP-1 accident is very urgent. In order to selectively adsorb the radioactive cesium, three kinds of novel porous silica gels loaded with insoluble ferrocyanides(SLFC) were prepared using a successive impregnation/precipitation method. Based on the results of previous research, the SLFC composites have relatively large uptake ratio above 95%, distribution coefficients(Kd) above 103 cm3/g, and excellent adsorption kinetics even in seawater. The solidification results also indicate that zeolites have an excellent Cs immobilization characteristic, gas-trapping and self-sintering abilities, and low leachability. We chose three kinds of SLFC composites to achieve the optimization of solidification by mixing with nine kinds of additives at high temperatures(up to 1200 °C). The Cs contents in the three composites were estimated to be below 30% of the initial contents and decreased with the three stages at calcination temperatures ranging from 25 to 1200 °C. By contrast, the Cs immobilization ratio was markedly lowered by mixing with additives: of those, allophane had the best immobilization result. By increasing the additive ratio to 50 wt%, the Cs immobilization ratio became almost 100% and no volatilization of Cs was detected even after calcination at 1200 °C. This result indicates that calcination of the mixture of SLFC composites after adsorbing Cs+ ions and specific additives under appropriate ratio is effective for stable solidification.     

Visible‐Light‐Induced Generation of H2 by Nanocomposites of Few‐Layer TiS2 and TaS2 with CdS Nanoparticles

Graphene analogues of TaS₂ and TiS₂ (3–4 layers), prepared by Li intercalation followed by exfoliation in water, were characterized. Nanocomposites of CdS with few‐layer TiS₂ and TaS₂ were employed for the visible‐light‐induced H₂ evolution reaction (HER). Benzyl alcohol was used as the sacrificial electron donor, which was oxidized to benzaldehyde during the reaction. Few‐layer TiS₂ is a semiconductor with a band gap of 0.7 eV, and its nanocomposite with CdS showed an activity of 1000 μmol h^?1 g^?1_. The nanocomposite of few‐layer TaS₂, in contrast, gave rise to higher activity of 2320 μmol h^?1 g^?1, which was attributed to the metallic nature of few‐layer TaS₂. The amount of hydrogen evolved after 20 and 16 h for the CdS/TiS₂ and CdS/TaS₂ nanocomposites was 14833 and 28132 μmol, respectively, with turnover frequencies of 0.24 and 0.57 h^?1, respectively.