Modeling Studies of the Formation and Destruction of NO in Pulsed Barrier Discharges in Nitrogen and Air

This paper presents the results of modeling studies on the formation and destruction of NO in pulsed barrier discharges in nitrogen and air. The goals of this work are to identify the major processes involved in the formation and destruction of NO in air discharges, to distinguish between oxidative and reductive paths for NO destruction, to explore the potential importance of excited state reactions, to evaluate the role of water in such systems, and to identify the final products in the absence of heterogeneous processes. In all cases, the systems were modeled with 100×10^–4% (100 ppm) of added NO, with and without 3% added water. The focus in all of this work is chemistry in the post-pulse regime.     

The search for a new model structure of β-Factor XIIa

We present the search for a new model of -factor XIIa, a blood coagulation enzyme, with an unknown experimental 3D-structure. We decided to build not one but three different models using different homologous proteins as well as different techniques and different modellers. Additional studies, including extensive molecular dynamics simulations on the solvated state, allowed us to draw several conclusions concerning homology modelling, in general, and -factor XIIa, in particular.     

流动注射停流法快速测定环境水样中COD

应用流动注射停流分析技术 ,对环境水样中的COD进行测定。采用KMnO4 作氧化剂和光度分析指示剂 ,葡萄糖作基准物质 ,在反应温度为 95℃ ,停流 5min时 ,COD测定范围为 0～10 0mg·L- 1,检出限为 2mg·L- 1,相对标准偏差为 0 .8% (n =9) ,回收率为 85 %～ 95 %。Cl-<15 0mg·L- 1时不干扰测定     

电位溶出法同时测定锌镉铅的研究

探讨了一种同时测定锌、镉、铅的溶出分析方法。在 0 .0 17mol·L- 1H2 SO4 HNO3混合酸介质中 ,用同位镀汞法在电位 - 1.5 0V条件下电解富集 60s ,锌、镉、铅分别在 - 1.0 7,- 0 .65及 - 0 .4 6V处有一良好的溶出峰 ,锌浓度在 0 .0 0 2 5～ 0 .0 2 5 μg·ml- 1,镉和铅在 0 .0 0 2 5～ 0 0 2 3μg·ml- 1范围内与峰高呈良好的线性关系 ,检出限锌为 0 .0 0 0 75 μg·ml- 1,镉和铅为 0 .0 0 0 70 μg·ml- 1。方法操作简便、快速、准确。用于环境水质标样、纯净水及自来水中锌、镉、铅的同时测定 ,均获得满意结果     

水—正己烷—甲醇体系的液液平衡研究

随着国民经济的发展 ,汽油、柴油等发动机燃料的供求关系会日趋紧张 ,寻求代用燃料是今后燃料工业发展的必然趋势 ,而以甲醇、乙醇等作为部分代用燃料成分是今后的一个重要方向[1] 。由于传统的甲醇合成工艺受到传热、传质和化学平衡的限制 ,原料及能源的利用率有待于进一步提高。钟炳等人根据超临界相反应特点 ,向体系中加入适宜溶剂如正己烷 ,在超临界条件下合成甲醇 ,同时克服了现有过程存在的热力学限制和传热限制 ,并将ＣＯ单程转化率提高到 90 %以上[2 ] 。但是 ,正己烷的加入给合成甲醇过程带来了产物分离和溶剂回收问题。反应器流出…     

Morphology and mechanical properties of poly(vinyl alcohol) and starch blends prepared by gelation/crystallization from solutions

 In an attempt to produce biodegradation materials, poly(vinyl alcohol) (PVA)–starch (ST) blends were prepared by gelation/crystallization from semidilute solutions in dimethyl sulfoxide (Me₂SO) and water mixtures and elongated up to 8 times. The content of mixed solvent represented as Me₂SO/H₂O (volume percent) was set to be 60/40 assuring the greatest drawability of PVA homopolymer films. The PVA/ST compositions chosen were 1/1, 1/3, and 1/5. The elongation up to 8 times could be done for the 1/1 blend but any elongation was impossible for blends whose ST content was beyond 50%. When the blends were immersed in water at 20 or 83 °C, the solubility became considerable for an undrawn blend with 1/5 composition and a drawn 1/1 blend with λ=8. To avoid this phenomenon, cross-linking of PVA chains was carried out by formalization under formaldehyde vapor. Significant improvement could be established by the cross-linking of PVA chains. For the 1/1 blend, the amount of ST dissolved in water at 23 °C was less than 3% for the undrawn state and 25% for the drawn film. The decrease in the ST content was enough for use as biodegradation materials. Namely, the water content relating to the biodegradation in soil is obviously different from such a serious experimental condition that a piece of blend film was immersed in a water bath. At temperatures above 0 °C, the storage modulus of the formalization blends became slightly higher than those of the nonformalization blends. The Young's modulus of the drawn films with a draw ratio of 8 times was 2 GPa at 20 °C. Received: 23 June 2000 Accepted: 30 October 2000     

Calorimetric Investigation of Conversion to The Most Stable Subgel Phase of Phosphatidylethanolamine-water System

The conversion of either the gel or the liquid crystal phase to the most stable subgel phase in dimyristoylphosphatidylethanolamine (DMPE)-water system at a water content of 25 mass% was studied by differential scanning calorimetry and isothermal calorimetry. The calorimetric experiments were performed for two samples depending on whether the thermal treatment of cooling to -60°C was adopted or not. In DSC of varying heating rate, exothermic peaks due to the partial conversion were observed at either temperatures just below the gel-to-liquid crystal phase transition at 50°C or temperatures where the liquid crystal phase is present as a metastable state. The enthalpies of conversion for both the gel and the liquid crystal phase were measured directly by the isothermal calorimetries at 47 and 53°C, respectively, where the exothermic peaks were observed by DSC and were compared with the enthalpy difference between the gel and subgel phases and that between the liquid crystal and subgel phases. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermomechanical Analysis of Polysaccharide Hydrogels in Water

Application of thermomechanometry to the measurement of hydrogels containing a large amount of water was carried out by static and dynamic methods. A thermomechanical analyzer (TMA) equipped with a quartz compression probe immersed in water was used. Polysaccharide hydrogels containing ca 98% water were measured. Creep of hydrogels in water was analyzed in a stress range from 1.04⋅10³ to 5.2⋅10³ Pa and loading rate from 0.3⋅10³ to 3.0⋅10³ Pa min⁻¹.Stress relaxation was measured in compressed ratio range from 0.02 to 0.45 m m⁻¹ and in compressing rate was 0.09 to 0.15 m m⁻¹ min⁻¹. Dynamic viscoelasticity was measured by TMA when dynamic Young’s modulus which was larger than 1⋅10⁴ Pa in frequencies ranging from 0.02~0.2 Hz. This revised version was published online in July 2006 with corrections to the Cover Date.     

水汽对TiO_2上CO光催化氧化反应的影响

在室温、杀菌灯照射下 ,对“氧化的”TiO2 催化剂上CO光催化氧化反应进行了研究 ,发现当原料气中加入分压为 3.36kPa水汽时 ,光催化氧化CO的活性明显降低 .这可能是由于杀菌灯照射下TiO2 表面生成的O-(a) 或O(a) 与H2 O反应生成·OH ,降低了表面的O-(a) 和O(a) 的浓度 ,而生成的·OH不能使CO氧化 ,从而降低了氧化CO的能力     

两相催化体系中辛烯的氢甲酰化反应研究

考察了反应温度、膦／铑化、表面活性剂种类及浓度、CO／H2压力比等因素对水溶性铑－膦配合物RhCI(CO)(TPPTS)2催化剂催化1－辛烯、2－辛烯氢甲酰化反应活性的影响,并选择出了优化的反应条件。研究结果表明,在该体系中表面活性剂的结果是影响RhCI(CO)(TPPTS)2催化2－辛烯转化率和选择性的重要原因,并对在两相体系2－辛烯氢甲酰化反应中表面活性剂十四烷基二甲基苄基氯化铵（BDAC）明显优于十六烷基三甲基溴化铵（CTAB）的原因进行了探讨。