The simultaneous use of a hollow‐fiber‐supported liquid membrane and dispersive liquid–liquid microextraction for the determination of pesticides directly in grape juice was investigated. The detection and quantification were performed by liquid chromatography with diode array detection. The optimum extraction condition was reached by filling the pores of the membrane wall with dodecanol and using hexane/acetone as extraction/dispersion solvents. Salt addition had a highly negative effect on the extraction efficiency and the optimum extraction time was 60 min. The volume of hexane/acetone mixture and the sample pH did not affect the signal at the levels studied. Therefore, an intermediate amount of these solvents (250 μL; 1:7.5 v/v) and pH 6 were selected. The optimum desorption condition was obtained with acetonitrile and 10 min of desorption time. The linear working range varied from 58 to 500 μg/L (parathion‐methyl), 62–500 μg/L (difenoconazole) and 107–500 μg/L (chlorpyrifos), with correlation coefficients ranging from 0.9980–0.9942. The limits of detection and quantification found were, respectively, 17 and 58 μg/L for parathion‐methyl, 19 and 62 μg/L for difenoconazole and 32 and 107 μg/L for chlorpyrifos. The relative standard deviation ranged between 3.5 and 11.2%. 相似文献
White‐light‐emitting protocols based on organic materials have received much attention in the academic and industrial fields because of their potential applications in full‐color displays and back‐lighting units for liquid crystal displays. Here, the attempt is made to fabricate white‐light‐emitting, electrospun poly(ethylene oxide) (PEO) sheets containing controlled concentrations of a single light‐emitting material composed of a type of hyperbranched conjugated polymer (HCP). The HCPs used here have the unique property of exhibiting a variety of fluorescence colors in the electrospun matrix that is caused by the different distances between HCP chains depending on their concentrations, leading to different degrees of intermolecular energy transfer. Therefore, the emission colors of the PEO sheets can be easily manipulated by simply varying the HCP concentrations in the PEO matrix. The resulting method for fabricating nanofibers comprising light‐emitting materials in the polymer matrix has great potential for easy fabrication of cost‐effective, flexible light‐emitting system.
A new method for fabricating hydrogels with intricate control over hierarchical 3D porosity using microfiber porogens is presented. Melt electrospinning writing of poly(ε‐caprolactone) is used to create the sacrificial template leading to hierarchical structuring consisting of pores inside the denser poly(2‐oxazoline) hydrogel mesh. This versatile approach provides new opportunities to create well‐defined multilevel control over interconnected pores with diameters in the lower micrometer range inside hydrogels with potential applications as cell scaffolds with tunable diffusion and transport of, e.g., nutrients, growth factors or therapeutics.
Hydrogel microfibers have been considered as a potential biomaterial to spatiotemporally biomimic 1D native tissues such as nerves and muscles which are always assembled hierarchically and have anisotropic response to external stimuli. To produce facile hydrogel microfibers in a mathematical manner, a novel dynamic‐crosslinking‐spinning (DCS) method is demonstrated for direct fabrication of size‐controllable fibers from poly(ethylene glycol diacrylate) oligomer in large scale, without microfluidic template and in a biofriendly environment. The diameter of fibers can be precisely controlled by adjusting the spinning parameters. Anisotropic swelling property is also dependent on inhomogeneous structure generated in spinning process. Comparing with bulk hydrogels, the resulting fibers exhibit superior rapid water adsorption property, which can be attributed to the large surface area/volume ratio of fiber. This novel DCS method is one‐step technology suitable for large‐scale production of anisotropic hydrogel fibers which has a promising application in the area such as biomaterials.
Porous polymeric monoliths with densities as low as ≈0.060 g cm−3 are prepared in a gel‐emulsion template way, of which the stabilizer employed is a newly discovered acidified aramid fiber that is so efficient that 0.05% (w/v, accounts for continuous phase) is enough to gel the system. The porous monoliths as obtained can be dried at ambient conditions, avoiding energy‐consuming processes. Importantly, the monoliths show selective adsorption to HCHO, and the corresponding adsorption capacity ( M6 ) is ≈2700 mg g−1, the best result that is reported until now. More importantly, the monoliths can be reused after drying. 相似文献
A new multiple monolithic fiber solid‐phase microextraction using a polydopamine‐based monolith as the extraction medium is proposed. The monolith was synthesized by facile in situ copolymerization of N‐methacryldopamine and dual cross‐linkers (divinylbenzene/ethylenedimethacrylate) in the presence of N ,N‐dimethylformamide. The effect of the contents of N‐methacryldopamine and porogen in the polymerization mixture on the extraction performance was investigated thoroughly. A series of characterization studies was performed to validate the structure and properties of the monolith. The prepared multiple monolithic fibers were used for the extraction of triazine herbicides in environmental water samples. After the optimization of the extraction parameters, a convenient, sensitive, cost‐effective, and environmentally friendly method for the determination of trace triazine herbicides in water samples was developed by coupling multiple monolithic fibers solid‐phase microextraction with high‐performance liquid chromatography and diode array detection. The results indicated that the limits of detection and quantification for the target compounds were 0.031–0.14 and 0.10–0.45 μg/L, respectively. Good precision and reproducibility were obtained with the relative standard deviations below 10%. The developed method was applied to the analysis of the triazine herbicides in different water samples (lake, river, and farmland waters). The recoveries of the method were in the range between 79.6 and 117%. 相似文献