Crystal Structure of 10-(2'''',5''''-Dimethoxybenzylidene) Anthrone

1 INTRODUCTION The 10-benzylidene anthrones which are important intermediate for organic syntheses[1～3] usually possess thermochromism[4] and photo- chromism[5], and have been found recently to have evident anti-cancer activity[6]. We found that the substituents in the phenyl ring will affect the bioactivity of those compounds. For more deeply investigating the structure-activity relationships (SAR) and understanding interactions between the three dimensional structure of the compound …     

Observations on the swelling characteristics of the zwitterionic hydrogel of poly(1-3-sulfopropyl)-2-vinyl-pyridinium-betaine hydrogel

Samples of poly[1-(3-sulfopropyl)-2-vinyl-pyridinium-betaine] (PSPV) have been synthesized to high conversion by free radical polymerization in aqueous solution of the zwitterionic monomer SPV with several concentrations of the crosslinker N,N′-methylene-bis-acrylamide (MBA). The densities of the resultant xerogels increased regularly with the content of MBA. Hydrogels obtained by swelling them in water and aqueous KSCN solution were examined by gravimetric and dimensional analysis. The water contents increased with decreasing content of MBA, the value of 92.7 wt% at the lowest MBA content being higher than that for other zwitterionic hydrogels. Enhanced swelling occurred in 1 M aq. KSCN at each MBA content, the total swelling being 98.1 wt% at the lowest crosslinker content. Swelling increased with increasing temperature. An approximate procedure to formulating swelling equilibrium in term of the volume fraction of water in hydrogel, in conjunction with the van’t Hoff equation, yields a small positive value for the enthalpy of swelling. This is compared with values derived similarly for other hydrogels.     

The 1,3-Dipolar Cycloadditions of 3-Arylsydnone-4-Carbonitrile Oxides with Alkenes

3-Arylsydnone-4-carbonitrile oxides may undergo 1,3-dipolar cycloadditions with alkenes to produce the corresponding 3-aryl-4-(5-substituted-isoxazolin-3-yl)sydnones. The direct reaction of 3-arylsydone-4-carbohydroximic acid chlorides with alkenes may also give the same products, and with higher yield.     

氢在钯单晶表面的解离与在体相的扩散

氢分子在金属表面的解离吸附与氢原子在金属体相的扩散是个典型的表面过程.前者在甲烷化及合成氨等基础化工反应中起着关键作用;后者常常导致金属材料的脆化与断裂,但过渡金属及其合金是安全和优良的储氢材料.因此,研究氢分子在金属表面的解离吸附与氢原子在金属体相的扩散,是多相催化与金属物理广泛感兴趣的课题,具有重要的理论和应用价值.本文采用分子动力学方法初步探讨了二者之间的关联.分子催化动力学为从微观层次上研究上述课题提供了一种理论方法.本文采用经过我们改进的半经验LEPS方法,计算了氢分子在Pd(100)和(110)晶面的解离和氢原子在钯表面与体相扩散的相互作用位能面,并根据计算结果探讨了其微观机理.     

On the statistical independence of various column contributions to band broadening. Part 1: Second moment contributions from statistically independent,longitudinal diffusion in both phases

The total length-based second moment contribution from longitudinal sample diffusion in both phases on a column, σD , is derived by adding individual partial differential contributions to a partial differential equation accounting for the longitudinal diffusion processes only. Although each diffusion-dispersed sample part is equilibrated between two phases, the resulting σ,D (= 2D _mt _m + 2D _st _s) can be interpreted as the sum of two independent contributions in accordance with the variance addition rule. (D _m and D _s are the mean diffusion coefficients and t _mand t _s the mean residence times of the sample in the mobile and stationary phases, respectively.) The same σD expression is derived from the random walk model of Giddings by treating the diffusional process in each phase as statistically independent of the other processes. Under these conditions the broadening contribution from longitudinal diffusion in the mobile phase is shown to be independent of the velocity profile.     

Deprotonated and non-deprotonated cobalt(II) complexes of the bis-amide tetradentate ligand N,N′-(dipicolyl)-1,8-naphthylene diamine. Three different modes of coordination by the ligand

The preparation and some properties of the cobalt(II) complexes Co(LH₂)Cl₂·2H₂O, Co(LH₂(NCS)₂ and CoL·H₂O (whereLH₂=N,N-(dipicolyl)-1,8-naphthylenediamine) are reported. On the basis of magnetic moments, visible reflectance and IR data, the structure is proposed to be pseudo-octahedral for Co(LH₂)Cl₂·2 H₂O, pseudo-tetrahedral for Co(LH₂)(NCS)₂ and square planar for CoL·H₂O.

---

Deprotonierte und Nicht-deprotonierte Co(II)-Komplexe des vierzähnigen Bisamid-Liganden N,N-(Dipicolyl)-1,8-naphthyldiamin. Drei verschiedene Koordinationstypen

Zusammenfassung Es werden die Darstellung und einige Eigenschaften der Kobalt(II)-Komplexe Co(LH₂)Cl₂·2 H₂O, Co(LH₂)(NCS)₂ und CoL·H₂O [LH₂=N,N-(dipicolyl)-1,8-naphthylendiamin] diskutiert. Auf der Grundlage von magnetischen Momenten, von Daten der sichtbaren Reflektions-und IR-Spektren wird eine pseudooctaedrische Struktur für Co(LH₂)Cl₂·2H₂O, eine pseudotetraedrische für Co(LH₂)(NCS)₂ und eine planar-quadratische für CoL·H₂O vorgeschlagen.

     

Quantum-chemical study of manifestations of conjugation in molecules containing conjugated C=C and C=O bonds

Based on the MNDO calculations of the electronic structure of the molecules of acrolein, glyoxal, and butadiene, possible mechanisms of the conjugation in systems containing conjugated C=C and C=O bonds have been analyzed. In the electronic ground state ofs-trans-acrolein, the , -conjugation is very small, whereas in the first excited electronic state, the conjugation is substantial, In the ground state ofs-trans-glyoxal, the ,-conjugation should manifest itself clearly but should be weaker than in butadiene, whereas in the first excited electronic state, this conjugation should be more pronounced, Alternation of double and single bonds in the classic structural formula of a molecule does not ensure that this molecule exhibits the properties of a -conjugated system even in planar conformations.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1648–1652, July, 1996.     

3-(4-Hydroxymethylphenylsulfanyl)propanoic acid (HMPPA) as a new safety catch linker in solid phase peptide synthesis

A new safety catch linker, 3-(4-hydroxymethylphenylsulfanyl)propanoic acid (HMPPA), is described for use in solid phase peptide synthesis. The linker is readily synthesized from commercially available chemicals in a more cost efficient way compared to similar reported linkers. The HMPPA linker is easily attached to an amino derivatized solid support followed by on-resin oxidation of the thioether to sulfoxide, thereby making the linker very stable towards strong acid treatment. Final resin cleavage is performed by reductive acidolysis.     

Thermal degradation behavior of poly(4-hydroxybutyric acid)

Thermal degradation behavior of poly(4-hydroxybutyric acid) (P(4HB)) was investigated by thermogravimetric and pyrolysis-gas chromatography mass spectrometric analyses under both isothermal and non-isothermal conditions. Based on the thermogravimetric analysis, it was found that two distinct processes occurred at temperatures below and above 350 °C during the non-isothermal degradation of P(4HB) samples depending on both the molecular weight and the heating rate. From ¹H NMR analysis of the residual P(4HB) molecules after isothermal degradations at different temperatures, it was confirmed that the ω-hydroxyl chain-end was remained unchanged in the residual P(4HB) molecules at temperatures below 300 °C, while the ω-chain-end of P(4HB) molecules was converted to 3-butenoyl units at temperatures above 300 °C. In contrast, the majority of the volatile products evolved during thermal degradation of P(4HB) was γ-butyrolactone regardless of the degradation temperature. From these results, it is concluded that during the thermal degradation of P(4HB), the selective formation of γ-butyrolactone via unzipping reaction from the ω-hydroxyl chain-end predominantly occurs at temperatures below 300 °C. At temperatures above 300 °C, both the cis-elimination reaction of 4HB unit and the formation of cyclic macromolecules of P(4HB) via intramolecular transesterification take place in addition to unzipping reaction from the ω-hydroxyl chain-end. Finally, the primary reaction of thermal degradation of P(4HB) at temperatures above 350 °C progresses by the cyclic rupture via intramolecular transesterification of P(4HB) molecules with a release of γ-butyrolactone as volatile product. Moreover, we carried out the thermal degradation tests for copolymer of 93 mol% of 4HB with 7 mol% of 3-hydroxybutyric acid (3HB) to examine the effect of 3HB units on thermal stability of P(4HB).     

Synthesis and Crystal Structure of a New Copper(II) Complex with 4-Cyanobenzoic Acid

1 INTRODUCTION Exploration on the syntheses and properties of car- boxylate complexes, especially aromatic carboxylate complexes, has always been a fascinating and chal- lenging research field for decades either in coor- dination chemistry or in functional materials[1, 2]. Cy- anobenzoic acid (Hcba) possessing two functional coordination groups should display structural diver- sities on the formation of complexes[3～15]. In particu- lar, the copper(II) carboxylate complexes bearing spe- …