Revealing the Reaction and Fading Mechanism of FeSe2 Cathodes for Rechargeable Magnesium Batteries

Rechargeable Mg batteries (RMBs) are advantageous large-scale energy-storage devices because of the high abundance and high safety, but exploring high-performance cathodes remains the largest difficulty for their development. Compared with oxides and sulfides, selenides show better Mg-storage performance because the weaker interaction with the Mg²⁺ cation favors fast kinetics. Herein, nanorod-like FeSe₂ was synthesized and investigated as a cathode for RMBs. Compared with microspheres and microparticles, nanorods exhibit higher capacity and better rate capability with a smaller particle size. The FeSe₂ nanorods show a high capacity of 191 mAh g⁻¹ at 50 mA g⁻¹ and a good rate performance of 39 mAh g⁻¹ at 1000 mA g⁻¹. Ex situ characterizations demonstrate the Mg²⁺ intercalation mechanism for FeSe₂, and a slight conversion reaction occurs on the surface of the particles. The capacity fading is mainly because of the dissolution of Fe²⁺, which is caused by the reaction between Fe²⁺ and Cl⁻ of the electrolyte during the charge process on the surface of the particles. The surface of FeSe₂ is mainly selenium after long cycling, which may also dissolve in the electrolyte during cycling. The present work develops a new type of Mg²⁺ intercalation cathode for RMBs. More importantly, the fading mechanism revealed herein has considered the specificity of Mg battery electrolyte and would assist a better understanding of selenide cathodes for RMBs.     

Driving Organic Nanocrystals Dissolution Through Electrochemistry

We have recently discussed how organic nanocrystal dissolution appears in different morphologies and the role of the solution pH in the crystal detriment process. We also highlighted the role of the local molecular chemistry in porphyrin nanocrystals having comparable structures: in water-based acid solutions, protonation of free-base porphyrin molecules is the driving force for crystal dissolution, whereas metal (Zn^II) porphyrin nanocrystals remain unperturbed. However, all porphyrin types, having an electron rich π-structure, can be electrochemically oxidized. In this scenario, a key question is: does electrochemistry represent a viable strategy to drive the dissolution of both free-base and metal porphyrin nanocrystals? In this work, by exploiting electrochemical atomic force microscopy (EC-AFM), we monitor in situ and in real time the dissolution of both free-base and metal porphyrin nanocrystals, as soon as molecules reach the oxidation potential, showing different regimes according to the applied EC potential.     

Isomer-Specific Vibrational Spectroscopy of Microhydrated Lithium Dichloride Anions: Spectral Fingerprint of Solvent-Shared Ion Pairs

The vibrational spectroscopy of lithium dichloride anions microhydrated with one to three water molecules, [LiCl₂(H₂O)_1–3]⁻, is studied in the OH stretching region (3800–2800 cm⁻¹) using isomer-specific IR/IR double-resonance population labelling experiments. The spectroscopic fingerprints of individual isomers can only be unambiguously assigned after anharmonic effects are considered, but then yield molecular level insight into the onset of salt dissolution in these gas phase model systems. Based on the extent of the observed frequency shifts Δν^OH of the hydrogen-bonded OH stretching oscillators solvent-shared ion pair motifs (<3200 cm⁻¹) can be distinguished from intact-core structures (>3200 cm⁻¹). The characteristic fingerprint of a water molecule trapped directly in-between two ions of opposite charge provides an alternative route to evaluate the extent of ion pairing in aqueous electrolyte solutions.     

基于曲线问题情境的信息化教学尝试*——以“沉淀溶解平衡”为例

基于高中生对实验曲线理解困难的现状,为挖掘实验曲线的教学价值,以沉淀溶解平衡为例,结合课堂演示实验和教学软件,设计了“宏观微观符号曲线”多重表征教学为一体的实验探究课。根据沉淀溶解平衡实验证据,绘制实验曲线,构建微观模型和图像,从而培养学生的证据收集与应用意识,提高学生对曲线的分析和理解能力,领会各种变化曲线的来源。在曲线理解的基础上建立“溶解平衡转化”思维模型,以此为开展“曲线融入式”的问题引导型实验教学提供参考案例。     

离子液体中纤维素的溶解及再生特性

探讨了不同来源纤维素在离子液体1-丁基-3-甲基咪唑氯代盐(［bmim］Cl)中的溶解性能,并采用红外光谱、X-射线衍射及热重分析等手段对木浆纤维素在离子液体［bmim］Cl中溶解和再生前后的结构变化进行了分析。结果表明,未经活化的纤维素可直接溶解于离子液体［bmim］Cl 而不发生其它衍生化反应,原纤维素聚合度越低,溶解越容易。再生纤维素分子量较原纤维素有所降低,结晶状态由纤维素Ⅰ转变为纤维素Ⅱ,再生后纤维素热分解温度降低,热稳定性略有下降。     

On the Stability of Pt-Based Catalysts in HBr/Br2 Solution

Stability studies on supported metal nanoparticles are essential for gaining insight into the design and optimization of high-performance materials. In this work, the dissolutions of Pt-based catalysts in HBr/Br₂ mixture of various concentration regimes were studied and correlated with material structural properties. The dissolution of metal nanoparticles was enhanced by adding Br₂ to the HBr solution. Comparing with commercial Pt/C catalyst, the well-alloyed PtIr/C catalyst was observed to exhibit high resistance towards dissolution. In addition, regulating the accessibility of the metal sites to dissolution-inducing species contributed to the marked stability of the nanoparticles in HBr/Br₂ solutions, as shown for the surface-modified PtIr/C catalysts with organic diamine molecules.     

高力学强度细菌纤维素气凝胶纤维的连续化制备

气凝胶纤维因其高外表面积和高柔韧性在能量管理系统中具有潜在应用而引起了广泛关注.但是,目前制备的气凝胶纤维力学强度较低,限制了其实际应用.为提高气凝胶纤维力学性能,在始终保持细菌纤维素(BC)纳米纤维处于湿态下,利用NaOH/尿素/硫脲复合溶剂直接低温溶解原生BC,获得透明的BC纺丝原液;通过湿法纺丝制备了BC水凝胶纤维,经过水洗和冷冻干燥后处理,制得BC气凝胶纤维.采用偏光显微镜(POM)、13C核磁共振(13C-NMR)和高级旋转流变仪研究BC在复合溶剂中的溶解过程与状态;利用全反射傅里叶变换红外吸收光谱(ATR-FTIR)、X射线衍射(XRD)和热失重(TG)研究BC溶解前后结构与性能变化;利用场发射扫描电镜(FESEM)、全自动比表面积和孔径分布分析仪、单丝强力仪对获得的BC气凝胶纤维结构与性能进行表征.结果表明,复合溶剂在?15℃条件下可以直接溶解原生湿态BC,最高溶解浓度为3 wt%;采用湿法纺丝制得高度多孔的连续BC气凝胶纤维,比表面积高达192 m^2/g且具有优异的力学性能,断裂强度和杨氏模量高达(9.36±1.68)MPa和(176±17.55)MPa,如0.4 mg BC气凝胶纤维可以支撑高于其本身质量5×10^4倍的重物.     

Atomic-Scale Insight into Exsolution of CoFe Alloy Nanoparticles in La0.4Sr0.6Co0.2Fe0.7Mo0.1O3−δ with Efficient CO2 Electrolysis

In situ exsolution of metal nanoparticles in perovskite under reducing atmosphere is employed to generate a highly active metal–oxide interface for CO₂ electrolysis in a solid oxide electrolysis cell. Atomic-scale insight is provided into the exsolution of CoFe alloy nanoparticles in La_0.4Sr_0.6Co_0.2Fe_0.7Mo_0.1O_3−δ (LSCFM) by in situ scanning transmission electron microscopy (STEM) with energy-dispersive X-ray spectroscopy and DFT calculations. The doped Mo atoms occupy B sites of LSCFM, which increases the segregation energy of Co and Fe ions at B sites and improves the structural stability of LSCFM under a reducing atmosphere. In situ STEM measurements visualized sequential exsolution of Co and Fe ions, formation of CoFe alloy nanoparticles, and reversible exsolution and dissolution of CoFe alloy nanoparticles in LSCFM. The metal–oxide interface improves CO₂ adsorption and activation, showing a higher CO₂ electrolysis performance than the LSCFM counterparts.     

Back cover: Mn2+ or Mn3+? Investigating transition metal dissolution of manganese species in lithium ion battery electrolytes by capillary electrophoresis

A new CE method with ultraviolet–visible detection was developed in this study to investigate manganese dissolution in lithium ion battery electrolytes. The aqueous running buffer based on diphosphate showed excellent stabilization of labile Mn³⁺, even under electrophoretic conditions. The method was optimized regarding the concentration of diphosphate and modifier to obtain suitable signals for quantification. Additionally, the finally obtained method was applied on carbonate-based electrolytes samples. Dissolution experiments of the cathode material LiNi_0.5Mn_1.5O₄ (lithium nickel manganese oxide [LNMO]) in aqueous diphosphate buffer at defined pH were performed to investigate the effect of a transition metal-ion-scavenger on the oxidation state of dissolved manganese. Quantification of both Mn species revealed the formation of mainly Mn³⁺, which can be attributed to a comproportionation reaction of dissolved and complexed Mn²⁺ with Mn⁴⁺ at the surface of the LNMO structure. It was also shown that the formation of Mn³⁺ increased with lower pH. In contrast, dissolution experiments of LNMO in carbonate-based electrolytes containing LIPF₆ showed only dissolution of Mn²⁺.     

有机电极材料固定化策略

有机电极材料因其理论比容量高、低成本、环境友好以及分子结构可设计性强等特点,有望成为下一代可持续和多功能能量储存设备的有效电极材料。然而,根据“相似相溶”原理,该类材料极易溶解在有机电解液中,导致电池容量衰减快、循环稳定性和倍率性能也较差。目前已有许多研究致力于通过“固定化”过程解决有机电极材料的溶解问题。本综述针对有机电极材料的固定化策略展开评述,介绍了有机电极材料的固定化机理,以及各种固定化策略在不同种类有机电极材料中所起的作用,指出了有机电极材料面临的挑战,并对未来的研究和改进方向进行展望。