Role of Hydrodynamic Conditions in the Distribution of Anodic Dissolution Rates in Cavity Etching Regions during Electrochemical Micromachining of Partially Insulated Surfaces

Experimental study of the distribution of local rates of electrochemical micromachining in the presence of photoresist masks in various hydrodynamic conditions (macroscopically nonuniform rotating disk electrode, sprayer flow, an electrode placed into a cell with chaotic bulk electrolyte mixing) shows that the maximum etching localization is achieved at the control of the dissolution rate by the mass transport rate (at achieving the anodic limiting current). The localization enhancement as compared to the primary current distribution takes place in the case of a turbulent flow at hydrodynamic conditions where the removal of dissolution products from the undercutting region is hindered. These conditions (electrochemical reaction limited by the ion mass transport rate, high resistance to the mass transport in the undercutting region) are necessary for the localization enhancement using a pulsed anodic–cathodic treatment.     

沉淀溶解法制备纳米硫化锌

以烷基黄原酸锌和硫化钠分别为锌源和硫源，采用烷基黄原酸锌沉淀溶解法制备了粒度可调、粒径分布比较窄的面心硫化锌纳米粒子，利用比表面积(BET)测定、透射电镜(TEM)、粉末X射线衍射(XRD)、傅里叶转换红外光谱(FTIR)等方法对合成的硫化锌纳米粒子进行了表征。结果表明随着烷基黄原酸锌链长的增长，通过添加硫化钠而生成的硫化锌纳米粒子的粒径逐渐减小。本文还对沉淀溶解法制备纳米硫化锌的溶液化学反应机理进行了探讨。     

原子吸收光谱法测定拉伸断口铬镍钼钛钢样品中主成分

研究了毫克级铬镍钼风样品中主成分镍的火焰原子吸收光谱法（FAAS法）和铬、钼、钒、钛、铝的塞曼恒温平台石墨炉原子吸收光谱法（ZSTPF－AAS法）。采用了微波溶样技术作为防污染样品预处理技术，采用石墨管硅涂层改进技术提高了仪器的测试精度。其中铬、镍、钼、钒、钛、铝的相对标准偏差分别为2.7%,0.97%,8.6%,7.3%,1.7%,7.3%。其加标回收率分别为96.5%,97%,96.7%,93%,98%,91%。通过分析，发现在较低温度下铬镍钼钛钢断面上有轻微的钼偏析现象，可能是拉伸断裂的主要化学影响因素。     

The inclusion complex of piromidic acid with dimethyl-β-cyclodextrin in aqueous solution and in the solid state

Inclusion complex formation of piromidic acid (PA) with dimethyl--cyclodextrin (DM--CD) in aqueous solution and in the solid state was confirmed by the solubility method, differential scanning calorimetry (DSC) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy. The apparent stability constant,K _c , of the complex was estimated to be 244 M^–1. The stoichiometry of the complex was given as the ratio 1:2 of PA to DM--CD. The dissolution rate of the PA/DM--CD complex was much greater than that of intact PA.Presented at the Fourth International Symposium on Inclusion Phenomena and the Third International Symposium on Cyclodextrins, Lancaster, U.K., 20–25 July 1986.     

Electrochemical machining of metals: Fundamentals of electrochemical shaping

Basic problems of metal electrochemical shaping theory are considered. Exact and approxi1mate (quasi-steady-state, locally one-dimensional) methods for solving direct and inverse problems are analyzed. Experimental methods for improving the electrochemical shaping accuracy are considered.Translated from Elektrokhimiya, Vol. 40, No. 12, 2004, pp. 1438–1480.Original Russian Text Copyright © 2004 by Davydov, Volgin, Lyubimov.     

配糖蛋白B—阳离子丙烯酸树脂微胶囊的性能研究

本文研究了配糖蛋白B-阳离子丙烯酸树脂微胶囊的形态、粒径及粒径分布,并在模拟胃液的酸性缓冲液中进行了微胶囊的溶解释放试验。结果表明该微胶囊能溶于人体的胃液中,可配制适合儿童口服的混悬剂。     

Investigation on the Interaction of Bendazac with β-, Hydroxypropyl-β-, and γ-, yclodextrins

The interactions of Bendazac, a topical non-steroidal anti-inflammatory drug, with-cyclodextrin, hydroxypropyl--cyclodextrin and -cyclodextrinwere investigated to evaluate possibilities to improve the drug's poor water solubilityand eventually to enhance the topical delivery of Bendazac. Phase solubility studiesdemonstrated the ability of the selected cyclodextrins to complex with Bendazac andincrease drug solubility. The amount of solubilized Bendazac increased linearly withthe addition of each cyclodextrin according toA_L type plots. ¹³C-NMR studiesshowed that the Bendazac A-ring was included in the cavity of the three cyclodextrins.The -cyclodextrin was also able to include the B-ring of Bendazac, forminga complex where one drug molecule fitted into two cyclodextrin molecules. Equimolarsolid systems of the drug with each cyclodextrin carrier were prepared using varioustechniques (physical mixing, spray-drying and freeze-drying). The results of differential scanning calorimetry and Fourier transform infrared analysis, performed on the solid systems, demonstrated that freeze-dried and spray-dried products had a high degree of amorphization and agreed with the hypothesis of the existence of drug–cyclodextrin interaction in the solid state. The cyclodextrins tested were able to improve the dissolution of Bendazac. The dissolution profile of the drug was also affected by the physico-chemical properties of each solid system, the freeze-dried products being the most rapidly dissolving forms.     

Thermodynamic investigation of zirconium diselenite

Summary On the basis of calorimetric research of selenium dioxide, zirconium dioxide and zirconium diselenite dissolution reactions in the hydrofluoric acid solution under 298 K a standard enthalpy of Zr(SeO₃)₂ formation reaction from ZrO₂ and SeO₂ and a standard enthalpy of zirconium diselenite formation have been obtained. The value of enthalpy has been equal to -58.1±3.43 kJ mol^-1 in ZrO_2(solid)+2SeO_2(solid) Zr(SeO₃)_2(solid) reaction. The standard enthalpy of zirconium diselenite formation is equal to H_f,298⁰Zr(SeO₃)_2(solid)= -1603.2±3.8 kJ mol^-1. The H_f,298⁰ Zr(SeO₃)_2(solid) value has been determined for the first time.     

SYNTHESIS OF CONDUCTIVE POLYANILINE VIA OXIDATION BY MnO2

A unique process of chemical oxidation polymerization of aniline using manganese dioxide (MnO2) as the oxidizing agent in an aqueous medium is described. The reaction between aniline and MnO2 follows a mechanism by which the organic monomer is oxidized while the metal oxide undergoes reductive dissolution. The effects of the amount of oxidizing agent and aniline, pH and temperature of the reactive system, type of acid on the yield and conductivity of polyaniline are discussed. The resulting polyaniline was characterized by [R and UV-Vis spectrometry. Polyaniline with a conductivity of 12.5 S/cm was obtained using 0.033 tool of aniline oxidized by 0.023 tool MnO2 in the presence of 100 mL of 2.7 mol/L HCI at 25℃ for 4 h.