Trace level analysis of volatile and semi-volatile organic compounds in water using a membrane/jet separator interfaced to an ion trap mass spectrometer

An ion trap mass spectrometer, equipped with a membrane/jet separator interface, is used for the direct detection of volatile and semi-volatile organic compounds in aqueous solutions. Aqueous sample is passed through a capillary membrane, the outside surface of which is continuously purged by helium. The permeate is pneumatically transported to the mass spectrometer via a jet separator which acts as an additional enrichment device. The performance and response characteristics of non-porous silicone and microporous polytetrafluoroethylene (PTFE) membranes are studied. The microporous membrane allows sufficient water to pass for it to be used as a reagent gas for chemical ionization. Both types of membranes provide detection limits in the parts per trillion (pptr) to parts per billion (ppb) range with a linear dynamic range of 3 orders of magnitude for some volatile organic compounds. Results show that there is no detectable matrix effect on response in the selected cases examined. The use of microporous membranes to analyze more polar compounds, such as 5-hydroxymethyl furfuraldehyde and lactic acid, is also demonstrated. The effects of other experimental parameters, such as membrane temperature and length, on sensitivity are also investigated.     

镁合金表面热喷涂WC-10Co-4Cr粒子沉积及分布特性

为了探究高速空气燃料热喷涂（AC-HVAF）过程中喷涂粒子撞击基材后的沉积特性。采用AC-HVAF热喷涂技术在AZ80镁合金基体上沉积WC-10Co-4Cr硬质涂层。通过离散沉积实验获得薄层沉积粒子,探讨各种沉积形貌的种类、形成原因、结合机制及射流中粒子的径向和轴向分布。结果表明：在AC-HVAF粒子沉积过程中,嵌入型沉积为主要的沉积形貌,同时包含少量的破碎型与空腔型沉积粒子。在涂层的形成过程中,嵌入型沉积对涂层/基体结合性能起重要作用;空腔型沉积的小颗粒及破碎型沉积的大颗粒是造成沉积效率下降的主要原因。喷涂粒子主要集中在射流中心,越靠近射流边缘,空腔型沉积粒子越多,最终导致AC-HVAF粒子射流呈现出空间分布特征。     

垂直弹射系统弹射初始阶段内流场数值分析

针对燃气活塞弹射装置在垂直发射系统中的应用,采用计算流体软件Fluent的源项法,用UDF(用户自定义函数)编译来实现火药燃气的质量、动量、能量向高压室的注入,对弹射初始阶段高压室和低压室内燃气流场进行了数值分析,得出以下结论:高压室压力在破膜前快速上升,破膜后缓慢上升的趋势,在高压上下两端压力应力集中,低压室呈中间和两端压力应力集中现象,同时高压室形成的低速燃气经导管产生激波形成超声速燃气流撞击低压室,并分析了压力和速度对弹射装置的影响。计算结果表明,该方法能够较好地仿真弹射装置燃气流场的特性,为弹射装置优化设计和装药设计提供理论依据。     

空化水射流研究现状及其应用

综述了高压水射流技术发展及应用过程,认为空化水射流是一种富有发展前途的高效新型射流．通过对空化水射流机理、空化数和冲击压力两个重要空化参数的分析,显示了空化射流的潜在优势．实验表明人工淹没空化射流具有较强的冲蚀效果,并克服了靶距范围的不足．简要介绍了该技术应用于火箭发动机内脏固体推进剂清洗工程的射流系统设计．     

Kinetics of the surface tension of micellar solutions: Comparison of different experimental techniques

The kinetics of the surface tension of micellar solutions of nonionic surfactant Triton X-100 is measured experimentally by means of three different techniques: oscillating jet, maximum bubble pressure and inclined plate. They allow to study the micellization kinetics at various time scales (from a few milliseconds to a few seconds) in fairly large concentration region up to 50 times CMC. The experimental data are satisfactorily explained by a theoretical model accounting for the kinetics of micellization, diffusion of surfactant species and expansion of the bubble interface. By this model are computed the characteristic times of diffusion and micellization, which are of comparable magnitude (about 5 to 200 ms), and the Gibbs' elasticity. The micellization time constant corresponds to the slow relaxation process known to coincide with the disintegration of micelles. Comparing our data with other data from literature one can conclude that more realistic information for the micellization kinetics is obtained by the maximum bubble pressure and the oscillating jet method. The inclined plate seems too slow to measure the relaxation processes in micellar solutions of this surfactant.     

数字喷墨印刷关键技术及其实现

经过20多年的完善与发展，喷墨技术已经成为大幅面广告印刷行业的主要印刷技术。随着图书按需印刷需求的快速扩张以及国家环保政策的迅速落地，喷墨印刷技术作为一项高效环保的数字化印刷技术，得到越来越高的关注，业内普遍认为喷墨印刷技术将是数字化印刷的必然发展趋势。然而与已经成熟的多Pass喷墨印刷设备不同，单Pass喷墨印刷设备在数据带宽、数据在线重构、高精度同步控制、喷嘴在线补偿等方面有着极高的技术要求。本文首先简要介绍了喷墨技术，然后针对单Pass喷墨印刷设备需要解决的技术问题提出了相应的解决方案。依据本文技术设计的单Pass书刊喷墨印刷机已经投放市场，并且获得了用户的普遍认可。     

Carburizing of titanium with plasma jets under reduced pressure

The carburizing of titanium with argon-methane (0.1%) and argon-methane (0.1%)-hydrogen (2%) plasma jets at a pressure of 200 Torr was studied. The carburizing of titanium was not successful with the argon-methane plasma jet because the specimen was covered with graphitic carbon. A hard and thick TiC layer was formed by the argon-methane-hydrogen plasma jet in a short time without the deposition of graphitic carbon. Emission spectra from the plasma jets show that the addition of hydrogen increases the amount of CH radicals as well as decreases the amount of C₂ and C in the plasma jet. The decrease of C₂ and C suppresses the deposition of graphitic carbon and enhances the TiC formation.Partly presented at Gordon Research Conference on Plasma Chemistry, August 11–15, 1986, Tilton, New Hampshire.     

Modelling of the pressure-velocity correlation in turbulence diffusion

Most current computations of trubulent flows with second-moment closure adopt the diffusion models which neglect the effect of pressure-velocity correlation. In the present paper the importance of this correlation effect is elucidated the neglect of this effect accounts for some major defects in the wide application of the second-moment closures. Through the relation between and , established by Lumley, we propose here a new turbulence diffusion model which takes into consideration the pressure effect. Applications of this new model in the computation of shearless turbulence mixing layer and plane and round-jet flows show that the spreading rate of these flows can be satisfactorily captured.     

关于数码喷墨印花技术及其在服装上的应用

数码喷墨印花技术是当前染整、服装设计、图案设计等专业人员关心的最新印花技术,具有很好的发展前景.本文论述了数码喷墨印花技术发展过程、印花原理、方式及印花的特点,同时也说明了印花机的组成、特性及其在服装中的应用,这对推动服装业的发展将起到积极作用.     

二维孔口紊动射流流场特性的实验研究

对一定水深下的孔口射流流场进行了一系列测试，研究了轴对称流动下轴心流速衰减和横断面上流速分布等特性，并总结归纳出其变化规律。