Review of Directly Producing Light olefins via CO Hydrogenation

Directly making light olefins via CO hydrogenation is a promising process to obtain a nonpetroleum based supply of alkenes.Limited by the ASF distribution function of Fischer-Tropsch synthesis,the yield of light olefins (C2-C4) can not reach the desired levels,which is a great challenge to overcome.Beginning thermodynamic analysis,the ASF distribution function,the reaction performance of CO hydrogenation and slurry reactor studies.The problems currently faced by this research area are presented at the end of the article.     

Structural and magnetic investigations of the mixed-valence Fe(II,III) two-dimensional layer complex, [Fe2(II) Fe2(III)(HCOO)10(C6H7N)6]n.

The structure of the complex, [Fe2(II)Fe2(III)(HCOO)10(C6H7N6)n, (1) exhibits a neutral two-dimensional layer network of alternating iron(II) and iron(III) ions, bridged equatorially by formate groups. All iron atoms are octahedrally coordinated, with iron(III) coordinating axially to one gamma-picoline and one formate group, while the iron(II) centers interact axially with two gamma-picoline groups, above and below the layer plane. The complex crystallizes in the triclinic space group P1 at all studied temperatures [at 120 K, the cell dimensions are: a = 10.228(1), b = 12.071(1), c = 12.072(1) A, alpha = 89.801(2), beta = 71.149(2), gamma = 73.371(2) degrees]. An intralayer antiferromagnetic exchange interaction of J = -2.8 cm(-1) between iron(II) and iron(III) was observed in the magnetic studies. Decreasing the temperature to close to 20 K causes a magnetic-ordering phenomenon to occur and a low-temperature phase with a long-range antiferromagnetic spin orientation appears. The magnetic phase transition was confirmed by M?ssbauer spectroscopic studies at temperatures above and below the critical temperature. Structural information of 1 from synchrotron X-ray diffraction data collected at room temperature and 16 K suggests that the antiferromagnetic ordering is caused by an enhanced pi-pi interaction between chi-picoline groups from adjacent layers.     

Nontrivial structural organization of pivalate complexes with the fragment {Fe2Li(μ3-O)}

1. Download : Download high-res image (228KB)
2. Download : Download full-size image

     

Cleavage of the Fe-Fe Bond of(Me_2SiSiMe_2)[η~5-C_5H_4Fe(CO)_2]_2 with Na/Hg and Molecular Structure of the Ring-Opened Complex

The reaction of the title cyclic complex(1) with sodium amal-gam in THF resulted in the expected cleavage of the Fe--Febond to afford bis-sodium salt (Me_2SiSiMe_2) [η~5-C_5H_4Fe(CO)_2Na]_2 (4). The latter was not isolated and was used di-rectly to react with MeI, PhCH_2Cl, CH_3C(O)Cl, PhC(O)Cl,Cy_3SnCl (Cy=cyclohexyl) or Ph_3SnCl to afford correspondingring-opened derivatives (Me_2SiSiMe_2) [η~5-C_5H_4Fe(CO)_2R]_2[5, R=Me; 6, R=PhCH_2; 7, R=CH_3C(O); 8, R=PhC     

含氮宾或卡宾的金属羰基簇合物的结构化学研究——Ⅰ.H_2Fe_3(N-C_6H_5)(CO)_9和Fe_3(N-C_6H_5)(μ_3-CO)(CO)_9的合成和结构

含氮宾的两个三核羰基铁簇合物是由[Et_3NH][HFe_3(CO)_(11)]与C_6H_5NCO在苯中反应获得。应用四园衍射仪测定了H_2Fe_3(N-C_6H_5)(CO)_9(Ⅰ)和Fe_3(N-C_6H_5)(μ_3-CO)(CO)_9(Ⅱ)的晶体结构。晶体数据为:C_(15)H_7NO_9Fe_3(Ⅰ),空间群P2_1/a,a=18.343(2),b=9.072(1),c=11.451(1)(?),β=102.03(1)°,V=1863.7(?)~3,Z=4,D_c=2.143g/cm~3;C_(16)H_5NO_(10)Fe_3(Ⅱ),空间群P2_1/c,a=8.634(1),b=13.026(1),c=17.642(2)(?),β=97.68(1)°,V=1966.3(?)~3,Z=4,D_c=1.820g/cm结构系用直接法解出,最后R_(Ⅰ)因子为0.033,R_(Ⅱ)因子为0.027。测定结果表明,(Ⅰ)和(Ⅱ)分子均具有C_s对称性,且三个Fe原子共面,呈近似等边三角形结构。(Ⅰ)中面桥N原子以不对称方式与三个Fe原子成键;(Ⅱ)中面桥羰基以不对称方式与三个Fe原子键连。Fe-N和Fe-C键长分别在1.896-1.938(?)和2.006-2.110(?)之间。     

工业用水中总铁含量的快速测定

介绍了以菲咯嗪－醋酸钠－醋酸缓冲溶液为显色体系、用自制的铁含量比色测定仪快速测定工业用水中总铁含量的方法。总铁含量≤０５ｍｇ／Ｌ时，标准偏差≤００３ｍｇ／Ｌ；总铁含量＞０５ｍｇ／Ｌ时，相对标准偏差≤５％。单次测定时间（包括样品处理）为１０～１５ｍｉｎ。采用单色光源及微型流动比色池，由蠕动泵和电子线路实现自动进样，直接显示测定结果。     

工业原料铁制备浆态床FT合成用的Fe-Cu-K-Si催化剂的探索

费托合成技术是公认的将煤基合成气转化为液体燃料和化工原料的重要技术途径。虽然固定床费托合成技术从五十年代起已经工业运转，但是浆态床费托合成技术由于其传热性能好，可直接使用第二代气化炉生产的富CO合成气，反应器结构简单，单台反应器生产能力大，开工率高，产品结构合理，     

负载型无铬超细铁基变换催化剂的制备和催化性能

 以镁铝尖晶石为载体，以过渡金属氧化物为助剂，用吸附γ－Fe2O3胶体法制备了负载型无铬铁基变换催化剂．TEM，XRD，BET和活性测试结果表明，采用胶体负载法制备的变换催化剂，其活性组分Fe3O4以分立的超细微颗粒分布在镁铝尖晶石载体表面上，颗粒之间存在一定的间隔．过渡金属氧化物NiO或V2O5能够进入Fe3O4晶格形成固溶体，起到代替氧化铬的作用，提高催化活性．负载型催化剂FeNi／MgAl2O4（m（NiO）／m（Fe2O3）＝3％）在汽／气比为1和空速为2000h－1的反应条件下，CO转化率在400和350℃时分别为95％和80％；在高空速和低汽／气比条件下也具有很好的催化性能．稳定性实验结果表明，该催化剂 具有良好的热稳定性和一定的抗硫能力．与非负载型催化剂相比，负载型催化剂具有更为优越的催化性能．     

Fe(III)与2,3-二羟基苯磺酸钠配位反应的动力学研究

[H+]在0.01～0.70mol?L-1范围内,离子强度为1.00mol?L-1,[Fe(III)]>>[配体]、[H+]>>[配体]的条件下,研究了Fe(III)与2,3-二羟基苯磺酸钠(Tiron)的配位反应.发现当[H+]≤3.00×10-2mol?L-1时,[Fe(III)]2对反应速率有明显的贡献.求得了相关反应的动力学参数,从而揭示了FeOH2+和FeOH24+与Tiron配位的解离反应途径及FeOH32+的缔合反应机制,并提出了该配位反应的可能机理.