用层切法反求牙冠(牙合)面

采用 CT、核磁共振等断层扫描方法对牙齿进行反求时 ,受到硬件技术的限制 ,难以得到足够的轮廓数据 .故先对牙齿实物进行塑料模型、层切模型的制作 ,对层切模型进行铣削 ,并取得每层断面的图像 .将所得图像转换为数字形式 ,并将结果与牙体其他部分的 CT数据拟合 ,得到了牙齿的整体的数据 .依据所得的整体数据得到牙齿的曲面和实体造型 ,在曲面和实体造型的基础上 ,进行了造型快速原型实体复制和有限元分析等工作 ,为后续建立修复方案库等完成了前期基础工作     

SPN结构线性层的设计

SPN结构是一种流行的分组密码总体结构；差分和线性分析是攻击分组密码的最强有力的方法．章介绍了SPN结构研究的最新进展，着重论述如何用矩阵方法设计抗差分和线性分析的线性层．     

南京市"数字房产"GIS共享平台建设框架

随着信息化的深入，大家都感受到将信息系统应用提升到平台层次。是避免资源浪费．实现数据共享最有效的方法和手段，本文结合南京市“数字房产”的建设，提出了以“层服务模型思想”来构建房产GIS共享平台。详细分析了平台建设的理论基础、总体结构以及数据的组织管理方式，对不同行业间的数据信息共享作出了尝试，     

气泡塔熔融结晶器中传递与晶层生长

分析了气泡塔结晶器熔融结晶过程中自熔体向晶层界面的热、质传递特征，建立了描述该过程晶层生长的稳态模型。在自熔体向晶层界面对流传热膜系数的计算中，将弹单元分为弹状气泡周围液膜区、尾迹区及液塞段3段，各段的平均对流传热膜系数不同。分别在表观气速0.04和0．08m/s下，用模型对己内酰胺晶层生长进行了计算，计算结果与实验结果基本吻合。     

波阻抗反演技术在孤东地区馆陶组薄储层描述中的应用

根据一维波动方程的拟合迭代法原理 ,给出了求解波阻抗σ(x)的算法。针对孤东地区馆陶组薄储层油藏存在的地层埋深浅、较疏松以及井径变化大泥岩中含有膨化矿物蒙脱石等引起的声波测井速度失真问题 ,采用分段函数法对其进行了校正。将校正后的声波资料进行反演 ,可得到高质量的资料 ,用该校正资料追踪描述的储层与录井结果吻合较好。应用结果表明 ,测井资料在反演中可以补充地震资料缺少的低频和高频分量 ,地震波阻抗反演技术是薄储层描述的有效方法     

Instability of the shear layer in the near wake of a circular cylinder

The instability of the shear layer separated from a circular cylinder is studied with the Reynolds number (Re) of 3000～104 by numerically solving the two-dimensional Navier-Stokes equations. In the wake of the cylinder, primary vortex shedding with natural frequency fs occurs, and the instability of the shear layer with frequency ft develops, which leads to mixing layer eddies and interacts with the primary shedding vortices. However, there remains some uncertainties regarding to the variation of the shear layer characteristic frequency with the Reynolds number. Based on the previous experimental work, several relationships of ft/fs with Re has been proposed including ft/fs～Re0.5 by Bloor, ft/fs～Re0.87 by Wei and Smith and ft/fs～Re0.67 by Prasad and Williamson. The objective of this study is to predict reasonably the relation of the shear layer instability frequency with the Reynolds number based on the present accurate calculation with the high-order schemes and high-resolution spectrum analysis. According to our calculated results, a variation for the normalized shear-layer frequency of the form ft/fs～Re0.69 is predicted numerically, which is in good agreement with a recent experimental measurement of Re0.67 and physical prediction of Re0.7.     

碳钢粉末渗铝试验研究

对 2 0碳钢进行了粉末包埋渗铝试验 ,优化了渗剂配方及渗铝工艺。采用X射线衍射仪分析了渗铝层的相成分 ,并对渗铝层的微观组织和渗铝钢的力学性能进行了测试。结果表明 ,使用 3号渗剂的 2 0碳钢的表面渗铝效果最好。 2 0碳钢渗铝层内未出现高铝脆性相 (FeAl3 、Fe2 Al5等 ) ,这有利于改善渗铝钢的力学性能和焊接性能。 2 0碳钢经渗铝处理后 ,其机械性能略有降低 ,高温持久性能明显降低 ,而抗高温氧化性能大大提高。     

Struts和JDO的Web应用

网络技术的发展促使应用系统结构由C／S结构到B／S结构的转变，因而要构建一个具有高稳定性、可扩展性、可维护性的应用系统，B／S结构的设计就极为重要．在简要介绍MVC软件设计模式和存储层设计的基础上，提出了Struts和JDO两种技术相结合的B／S开发结构，而这种B／S结构可以用于构建强壮的中小型Web应用系统．     

Present-Day crustal deformation field in China continent inverted from GPS observations, earthquake moment tensor and quaternary fault slip rates

Based on the bi-cubic Bessel spline function method, we have inverted the present-day crustal horizontal velocity field and deformation field in China continent by combining with 410 GPS observations, 327 seismic moment tensors of earthquakes and fault slip rates in China and its neighboring areas, and considered the geological and geophysical parameters at the same time. The results reveal that the crustal movement mostly takes on compression in SN-NE direction and extension in EW-NW direction in China continent. The continent is rotating southeast and takes on a clockwise rotation image from the west to the east, particularly in the southeast of Tibet and Chuan-dian area. Different blocks have different deformation in China continent. The south China, Ordos and Northeast block have good integrity.The deformation in the western part of China is obviously stronger than that in the eastern part. The strong strains are focused on the Himalaya, east Tibet,west Tian Shan and Chuandian block etc. The deformation at the joint of blocks is stronger than that within the blocks. The China continent deformation not only has the strike-slip faulting and extrusion feature but also has the crustal shortening and thickening feature.     

An iterative algorithm in potential-field inversion

1　Principle and MethodAll the problems of potential- field inversioncan be concluded that of solving nonlinear functionas follows:b =f( x) ( 1 )where x =( x1,x2 ,… .xn) T,xj( j =1 ,2 ,… ,n)indicate geometricparameters and physical parame-ters of the object;b=( b1,b2 ,… ,bm) T,bi( i=1 ,2 ,… ,m) indicate potential- field measurements.Main algorithms for expression( 1 ) are leastsquare method ( include damping least squaremethod ) ,gradient method ( conjugate gradientmethod and variable met…