井下车用零件多裂纹扩展的时变可靠性分析

针对工程中井下车用零件的多裂纹损伤问题，通过扭转疲劳试验模拟了车用零件中传动轴的疲劳损伤，并应用长焦显微镜与照相机相结合的测量法对零件一定疲劳循环次数后的表面裂纹进行了测量统计，同时以Paris模型及剩余强度估算模型对统计数据进行处理，得到了剩余强度.再应用所建立的时变可靠性数学模型，求取了零件时变强度的漂移率及波动率，并最终得出了该零件在一定疲劳循环后的可靠度.该方法从实际应用上解决了时变理论对零部件时变强度的动态检测问题，将时变理论向工程化应用推进一步，具有良好的应用前景.     

Kinematics of layered reinforced-concrete planar beam finite elements with embedded transversal cracking

In this work crack formation and development is addressed and implemented in a planar layered reinforced-concrete beam element. The crack initiation and growth is described using the strength criterion in conjunction with exact kinematics of the interlayer connection. In this way a novel embedded-discontinuity beam finite element is derived in which the tensile stresses in concrete at the crack position reaching the tensile strength will trigger a crack to open. Since the element is multi-layered, in this way the crack is allowed to propagate through the depth of the beam. The cracked layer(s) will involve discontinuity in the cross-sectional rotation equal to the crack-profile angle, as well as a discontinuity in the position vector of the layer’s reference line. A bond–slip relationship is superimposed onto this model in a kinematically consistent manner with reinforcement being treated as an additional layer of zero thickness with its own material parameters and a constitutive law implemented in the multi-layered beam element.     

过载作用下聚乙烯疲劳裂纹扩展行为研究

论文针对中密度聚乙烯材料(MDPE)，采用平板试样进行了I型疲劳裂纹扩展和单次过载下裂纹扩展试验．发现与金属材料类似，单次拉伸过载对聚乙烯(PE)的疲劳裂纹扩展有明显的迟滞作用，降低了裂纹扩展速率．试验还通过变载荷刻线法获取疲劳裂纹扩展前缘的实际形貌和变化规律，对常规变载荷刻线方法进行了调整和验证，其修正方法对高分子材料的疲劳裂纹扩展前缘刻线具有较好的效果．通过观察发现含楔形塑性区的裂尖钝化是裂纹迟滞的主要原因．过载引入的塑性区内残余应力对裂纹迟滞也起了重要作用．论文利用Dugdale模型计算了塑性区尺寸，使用基于残余应力的Wheeler模型对过载迟滞进行了很好的拟合．     

考虑重力因素的断溶体储层“井-洞-缝”模型试井解释方法

顺北油田属于大型断裂构造运动形成的断溶体储层，纵向裂缝系统和垂向分布的溶洞是主要的储集体空间.本文提出溶洞中的压力变化是由流动和波动共同产生的，依此把能量守恒方程与试井理论相结合，建立考虑重力因素的断溶体储层试井解释方法.定义无量纲量，并对无量纲方程进行Laplace变换，得到Laplace空间上的井底压力.由Stehfest数值反演算法得到试井分析所需的图版曲线.对重力因素进行敏感性分析表明：重力因素只影响双对数曲线的末期，当重力因素很明显时，曲线特征类似于定压边界.对新疆油田的某井进行分析，解释了曲线后期下掉原因，并给出溶洞体积以及波动相关参数等，分析结果与生产实际情况相吻合.     

Three-dimensional interfacial fracture analysis of a one-dimensional hexagonal quasicrystal coating

In this paper, the three-dimensional (3D) interfacial fracture is analyzed in a one-dimensional (1D) hexagonal quasicrystal (QC) coating structure under mechanical loading. A planar interface crack with arbitrary shape is studied by a displacement discontinuity method. Fundamental solutions of interfacial concentrated displacement discontinuities are obtained by the Hankel transform technique, and the corresponding boundary integral-differential equations are constructed with the superposition principle. Green’s functions of constant interfacial displacement discontinuities within a rectangular element are derived, and a boundary element method is proposed for numerical simulation. The singularity of stresses near the crack front is investigated, and the stress intensity factors (SIFs) as well as energy release rates (ERRs) are determined. Finally, relevant influencing factors on the fracture behavior are discussed.     

基于PFC 2D的含节理岩体单轴压缩数值模拟

基于颗粒流方法模拟含节理岩体的单轴压缩破坏过程,并对不同节理倾角的岩体进行单轴压缩数值模拟,研究不同节理倾角岩体的裂纹扩展路径、破坏形式以及强度变化规律。结果表明:(1)在单轴压缩破坏过程中,岩体节理倾角不同,裂纹扩展与最终破坏形态不同,但破坏过程基本一致;(2)当节理倾角从0°到90°的变化过程中,抗压强度随节理倾角的增大先减小后增加,总体呈"U"型分布规律,并在倾角为60°时达最小值。     

浅谈混凝土裂缝的预防与处理

混凝土的裂缝问题是一个普遍存在而又难于解决的实际问题,文章对混凝土工程中常见的一些裂缝问题进行分析,并针对具体情况提出了一些预防、处理措施。     

Stage-I fatigue crack studies in order to validate the dislocation-free zone model of fracture for bulk materials

Stage-I fatigue cracks are commonly described by the model of Bilby, Cottrell and Swinden (BCS model). However, since several experimental investigations have shown a dislocation-free zone (DFZ) in front of crack-tips, it is necessary to validate the new DFZ model and to examine the deviations to the BCS model. Therefore, the dislocation density distribution is derived from height profiles of slip lines in front of stage-I fatigue cracks in CMSX4® single crystals measured by contact-mode atomic force microscopy. This is possible, because the cracks are initiated at notches milled by focused ion beam technique directly on slip planes with a high Schmid factor. Consequently, the directions of the Burgers vectors are well known; it is possible to calculate the dislocation density distributions from the height profiles. The measured distributions are compared to the calculated distribution function of the DFZ model proposed by Chang et al. The additionally measured microscopic friction stress of the dislocations is then used to calculate the influence of grain boundaries on the dislocation density distribution in front of stage-I cracks. The calculation is done by the extended DFZ model of Shiue et al. and compared with the measured distribution function in polycrystalline specimens. Finally, the crack-tip sliding displacement as a measure for the crack propagation rate is compared for the DFZ model and the BCS model with the experimentally revealed values. The important result: the often used BCS model does not reflect the experimental measurements. On the contrary, the DFZ model reflects the measurements at stage-I cracks qualitatively and quantitatively.     

含中心裂纹梯度纳晶金属的数值模拟

梯度纳晶金属由于其微观组织的梯度分布,力学属性也呈现梯度变化,这使得其表现出不同于传统均匀材料的断裂行为．利用材料力学参数的梯度分布来表征梯度纳晶金属中晶粒尺寸的梯度变化,并编写ABAQUS和MATLAB脚本程序建立分层有限元模型．通过数值模拟计算了含有初始中心裂纹的梯度纳晶金属在受远端均匀拉应力作用下的裂尖J积分,分别研究了屈服应力梯度、裂纹角度和裂纹长度对金属材料断裂韧性的影响,并与传统粗晶进行了对比．结果表明梯度纳米结构的存在导致梯度纳晶金属内部的中心裂纹两端表现出不同的断裂韧性,小晶粒一侧裂尖的抗裂韧性优于大晶粒一侧裂尖,且屈服应力梯度绝对值越大,两者差距越大．梯度纳晶金属的断裂韧性受中心裂纹角度和长度变化的影响与传统粗晶金属基本一致,同时在晶粒尺寸梯度的作用下梯度纳晶的裂尖J积分略低于粗晶,即整体上拥有更好的抗裂韧性．